You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

151 lines
5.3 KiB

/**
******************************************************************************
* @file io.h
* @author MCD Application Team
* @version V4.0.1
* @date 21-July-2015
* @brief This file contains all the functions prototypes for the IO driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __IO_H
#define __IO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup IO
* @{
*/
/** @defgroup IO_Exported_Types
* @{
*/
/**
* @brief IO Bit SET and Bit RESET enumeration
*/
typedef enum
{
IO_PIN_RESET = 0,
IO_PIN_SET
}IO_PinState;
typedef enum
{
IO_MODE_INPUT = 0, /* input floating */
IO_MODE_OUTPUT, /* output Push Pull */
IO_MODE_IT_RISING_EDGE, /* float input - irq detect on rising edge */
IO_MODE_IT_FALLING_EDGE, /* float input - irq detect on falling edge */
IO_MODE_IT_LOW_LEVEL, /* float input - irq detect on low level */
IO_MODE_IT_HIGH_LEVEL, /* float input - irq detect on high level */
/* following modes only available on MFX*/
IO_MODE_ANALOG, /* analog mode */
IO_MODE_OFF, /* when pin isn't used*/
IO_MODE_INPUT_PU, /* input with internal pull up resistor */
IO_MODE_INPUT_PD, /* input with internal pull down resistor */
IO_MODE_OUTPUT_OD, /* Open Drain output without internal resistor */
IO_MODE_OUTPUT_OD_PU, /* Open Drain output with internal pullup resistor */
IO_MODE_OUTPUT_OD_PD, /* Open Drain output with internal pulldown resistor */
IO_MODE_OUTPUT_PP, /* PushPull output without internal resistor */
IO_MODE_OUTPUT_PP_PU, /* PushPull output with internal pullup resistor */
IO_MODE_OUTPUT_PP_PD, /* PushPull output with internal pulldown resistor */
IO_MODE_IT_RISING_EDGE_PU, /* push up resistor input - irq on rising edge */
IO_MODE_IT_RISING_EDGE_PD, /* push dw resistor input - irq on rising edge */
IO_MODE_IT_FALLING_EDGE_PU, /* push up resistor input - irq on falling edge */
IO_MODE_IT_FALLING_EDGE_PD, /* push dw resistor input - irq on falling edge */
IO_MODE_IT_LOW_LEVEL_PU, /* push up resistor input - irq detect on low level */
IO_MODE_IT_LOW_LEVEL_PD, /* push dw resistor input - irq detect on low level */
IO_MODE_IT_HIGH_LEVEL_PU, /* push up resistor input - irq detect on high level */
IO_MODE_IT_HIGH_LEVEL_PD, /* push dw resistor input - irq detect on high level */
}IO_ModeTypedef;
/** @defgroup IO_Driver_structure IO Driver structure
* @{
*/
typedef struct
{
void (*Init)(uint16_t);
uint16_t (*ReadID)(uint16_t);
void (*Reset)(uint16_t);
void (*Start)(uint16_t, uint32_t);
uint8_t (*Config)(uint16_t, uint32_t, IO_ModeTypedef);
void (*WritePin)(uint16_t, uint32_t, uint8_t);
uint32_t (*ReadPin)(uint16_t, uint32_t);
void (*EnableIT)(uint16_t);
void (*DisableIT)(uint16_t);
uint32_t (*ITStatus)(uint16_t, uint32_t);
void (*ClearIT)(uint16_t, uint32_t);
}IO_DrvTypeDef;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __IO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/