Back to Release page

Release Notes for STM32F7xx HAL Drivers

Copyright 2017 STMicroelectronics

 The hardware abstraction layer (HAL) provides low level drivers and the hardware interfacing methods to interact with upper layer (application, libraries and stacks).  It includes a complete set of ready-to-use APIs, that are feature-oriented instead of IP-Oriented to simplify user application development.

Update History

V1.2.8/ 13-February-2020

Main Changes

  • General updates to fix known defects and enhancements implementation
  • HAL/LL GPIO update
    • Update GPIO initialization sequence to avoid unwanted pulse on GPIO Pin's
  • HAL I2C update
    • Update HAL_I2C_EV_IRQHandler() API to fix I2C send break issue 
      • Add additional check on hi2c->hdmatx, hdmatx->XferCpltCallback, hi2c->hdmarx, hdmarx->XferCpltCallback in I2C_Master_SB() API to avoid enabling DMA request when IT mode is used.
    • Update HAL_I2C_ER_IRQHandler() API to fix acknowledge failure issue with I2C memory IT processes
      •  Add stop condition generation when NACK occurs.
    • Update HAL_I2C_Init() API to force software reset before setting new I2C configuration
    • Update HAL I2C processes to report ErrorCode when wrong I2C start condition occurs
      •  Add new ErrorCode define: HAL_I2C_WRONG_START
      •  Set ErrorCode parameter in I2C handle to HAL_I2C_WRONG_START
    • Update I2C_DMAXferCplt(), I2C_DMAError() and I2C_DMAAbort() APIs to fix hardfault issue when hdmatx and hdmarx parameters in i2c handle aren't initialized (NULL pointer).
      • Add additional check on hi2c->hdmtx and hi2c->hdmarx before resetting DMA Tx/Rx complete callback
  • HAL ADC Update
    • Add "ADC_INTERNAL_NONE" channel to disable the VBAT & TSVREFE channel.
  • HAL DCMI update
    • Add DCMI_SyncUnmaskTypeDef structure and HAL_DCMI_ConfigSyncUnmask() API to manage embedded synchronization delimiters unmasks
  • HAL EXTI update
    • General update to enhance HAL EXTI driver robustness 
      • Add additional assert check on EXTI config lines
      • Update to compute EXTI line mask before read/write access to EXTI registers
    • Update EXTI callbacks management to be compliant with reference manual: only one PR register for rising and falling interrupts.
      • Update parameters in EXTI_HandleTypeDef structure: merge HAL EXTI RisingCallback and FallingCallback in only one PendingCallback.
      • Remove HAL_EXTI_RISING_CB_ID and HAL_EXTI_FALLING_CB_ID values from EXTI_CallbackIDTypeDef enumeration.
    • Update HAL_EXTI_IRQHandler() API to serve interrupts correctly.
      • Update to compute EXTI line mask before handle EXTI interrupt.
    • Update to support GPIO port interrupts:
      • Add new "GPIOSel" parameter in EXTI_ConfigTypeDef structure
  • HAL HASH update
    • Null pointer on handler "hhash" is now checked before accessing structure member "hhash->Init.DataType" in the following API:
      • HAL_HASH_Init()
    • Following interrupt-based APIs have been added. Interrupt mode could allow the MCU to enter "Sleep" mode while a data block is being processed. Please refer to the "##### How to use this driver #####" section for details about their use.
      • HAL_HASH_SHA1_Accmlt_IT()
      • HAL_HASH_MD5_Accmlt_IT()
      • HAL_HASHEx_SHA224_Accmlt_IT()
      • HAL_HASHEx_SHA256_Accmlt_IT()
    • Following aliases have been added (just for clarity sake) as they shall be used at the end of the computation of a multi-buffers message and not at the start:
      • HAL_HASH_SHA1_Accmlt_End() to be used instead of HAL_HASH_SHA1_Start()
      • HAL_HASH_MD5_Accmlt_End() to be used instead of HAL_HASH_MD5_Start()
      • HAL_HASH_SHA1_Accmlt_End_IT() to be used instead of HAL_HASH_SHA1_Start_IT()
      • HAL_HASH_MD5_Accmlt_End_IT() to be used instead of HAL_HASH_MD5_Start_IT()
      • HAL_HASHEx_SHA224_Accmlt_End() to be used instead of HAL_HASHEx_SHA224_Start()
      • HAL_HASHEx_SHA256_Accmlt_End() to be used instead of HAL_HASHEx_SHA256_Start()
      • HAL_HASHEx_SHA224_Accmlt_End_IT() to be used instead of HAL_HASHEx_SHA224_Start_IT()
      • HAL_HASHEx_SHA256_Accmlt_End_IT() to be used instead of HAL_HASHEx_SHA256_Start_IT()
    • MISRAC-2012 rule R.5.1 (identifiers shall be distinct in the first 31 characters) constrained the naming of the above listed aliases (e.g. HAL_HASHEx_SHA256_Accmlt_End() could not be named HAL_HASHEx_SHA256_Accumulate_End(). Otherwise the name would have conflicted with HAL_HASHEx_SHA256_Accumulate_End_IT()). In order to have aligned names following APIs have been renamed:
      • HAL_HASH_MD5_Accumulate() renamed HAL_HASH_MD5_Accmlt()
      • HAL_HASH_SHA1_Accumulate() renamed HAL_HASH_SHA1_Accmlt()
      • HAL_HASHEx_SHA224_Accumulate() renamed HAL_HASHEx_SHA224_Accmlt()
      • HAL_HASHEx_SHA256_Accumulate() renamed HAL_HASHEx_SHA256_Accmlt()
    • HASH handler state is no more reset to HAL_HASH_STATE_READY once DMA has been started in the following APIs:
      • HAL_HASH_MD5_Start_DMA()
      • HAL_HMAC_MD5_Start_DMA()
      • HAL_HASH_SHA1_Start_DMA()
      • HAL_HMAC_SHA1_Start_DMA()
    • HASH phase state is now set to HAL_HASH_PHASE_READY once the digest has been read in the following APIs:
      • HASH_IT()
      • HMAC_Processing()
      • HASH_Start()
      • HASH_Finish()
    • Case of a large buffer scattered around in memory each piece of which is not necessarily a multiple of 4 bytes in length.
      • In section "##### How to use this driver #####", sub-section "*** Remarks on message length ***" added to provide recommendations to follow in such case.
      • No modification of the driver as the root-cause is at design-level.
  • HAL SDMMC update
    • Fix typo in "FileFormatGroup" parameter in the HAL_MMC_CardCSDTypeDef and HAL_SD_CardCSDTypeDef structures.
    • Fix an improve handle state and error management
    • Rename the defined MMC card capacity type to be more meaningful:
      • Update MMC_HIGH_VOLTAGE_CARD to MMC LOW_CAPACITY_CARD
      • Update MMC_DUAL_VOLTAGE_CRAD to MMC_HIGH_CAPACITY_CARD
  • HAL QSPI update
    • Remove Lock mechanism from HAL_QSPI_Init() and HAL_QSPI_DeInit() APIs
  • HAL LPTIM update
    • Add a polling mechanism to check on LPTIM_FLAG_XXOK flags in different API 
      • Add LPTIM_WaitForFlag() API to wait for flag set.
      • Perform new checks on HAL_LPTIM_STATE_TIMEOUT.
    • Workaround to fix MCU slack in sleep mode
      • Update __HAL_LPTIM_DISABLE () macro used to disable LPTIM HW instance
        • Remove the LPTIM_CR_ENABLE bit clear.
        • Add a new API  LPTIM_Disable() defined in  hal_lptim.c
    • Update __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) macro by adding a specific .... when using callback register
    • __HAL_LPTIM_ENABLE
    • Remove usseless check on LPTIM2 in the LL driver since F7 support only one instance of LPTIM.
    • Update the  LL_LPTIM_DISABLE() API used to disable LPTIM HW instance
      • Move API definition to ll_lptim.c
  • HAL TIM update
    • Add new macros to enable and disable the fast mode when using the one pulse mode to output a waveform with a minimum delay
      • __HAL_TIM_ENABLE_OCxFAST() and __HAL_TIM_DISABLE_OCxFAST().
    • Update Encoder interface mode to keep TIM_CCER_CCxNP bits low
      • Add TIM_ENCODERINPUTPOLARITY_RISING and TIM_ENCODERINPUTPOLARITY_FALLING definitions to determine encoder input polarity.
      • Add IS_TIM_ENCODERINPUT_POLARITY() macro to check the encoder input polarity.
      • Update HAL_TIM_Encoder_Init() API 
        • Replace IS_TIM_IC_POLARITY() macro by IS_TIM_ENCODERINPUT_POLARITY() macro.
    • Correct wrong instance parameter check in encoder mode
      • Replace IS_TIM_CC2_INSTANCE by IS_TIM_ENCODER_INTERFACE_INSTANCE in encoder interface : 
        • HAL_TIM_Encoder_Start()
        • HAL_TIM_Encoder_Stop()
        • HAL_TIM_Encoder_Start_IT()
        • HAL_TIM_Encoder_Stop_IT()
      • Replace IS_TIM_DMA_CC_INSTANCE by IS_TIM_ENCODER_INTERFACE_INSTANCE in encoder interface in DMA mode : 
        • HAL_TIM_Encoder_Start_DMA()
        • HAL_TIM_Encoder_Stop_DMA()
    • Update HAL_TIMEx_MasterConfigSynchronization() API to avoid functional errors and assert fails when using some TIM instances as input trigger.
      • Replace IS_TIM_SYNCHRO_INSTANCE() macro by IS_TIM_MASTER_INSTANCE() macro. 
      • Add IS_TIM_SLAVE_INSTANCE() macro to check on TIM_SMCR_MSM bit.
    • Provide new API to set and clear UIFREMAP
      • Add new definition for TIM Update Interrupt Flag Remap
        • TIM_UIFREMAP_DISABLE
        • TIM_UIFREMAP_ENABLE
      • Add new macro in HAL driver to enable and desable the  Update Interrupt Flag Remap
        •  __HAL_TIM_UIFREMAP_ENABLE()
        • __HAL_TIM_UIFREMAP_DISABLE()/__HAL_TIM_GET_UIFCPY macro
      • Add new mecanism to check whether the update interrupt flag (UIF) copy is set or not 
        • Add the __HAL_TIM_GET_UIFCPY() macro in the HAL driver
        • Add LL_TIM_IsActiveUIFCPY() API in the LL driver
      • Add new macro to check on the Update Interrupt Flag Remap mode
        • IS_TIM_UIFREMAP_MODE()
    • Remove usseless define in the LL driver 
      • TIMx_AF1_BKINE / TIMx_AF1_BKDFBKE /  TIMx_AF2_BK2INE /  TIMx_AF2_BK2DFBKE /  TIMx_AF2_BK2INP
  • HAL SMARTCARD update
    • Update SMARTCARD_SetConfig() API.
      • Split HAL_RCC_GetPCLK1Freq() and HAL_RCC_GetPCLK2Freq() macros from the BRR calculation.
  • HAL IRDA update
    • Update IRDA_SetConfig() API 
      • Split HAL_RCC_GetPCLK1Freq() and HAL_RCC_GetPCLK2Freq() macros from the IRDA_DIV_SAMPLING16() macro.
    • Update some API desciption
      • HAL_IRDA_Transmit() / HAL_IRDA_Transmit_IT()
      • HAL_IRDA_Receive() / HAL_IRDA_Receive_IT()
      • HAL_IRDA_Transmit_DMA() / HAL_IRDA_Receive_DMA()
  • HAL RCC update
    • Update the HAL_RCC_ClockConfig() and HAL_RCC_DeInit() API to don't overwrite the custom tick priority
    • Update HAL_RCC_OscConfig() API to don't return HAL_ERROR if request repeats the current PLL configuration
  • HAL/LL USART update
    • Add support to the Receiver Timeout Interrupt in the HAL_USART_IRQHandler
    • Update some API desciption 
      • HAL_USART_Transmit() / HAL_USART_Transmit_IT() 

      • HAL_USART_Receive() / HAL_USART_Receive_IT() 

      • HAL_USART_TransmitReceive() / HAL_USART_TransmitReceive_IT() 

      • HAL_USART_Transmit_DMA() / HAL_USART_Receive_DMA() / HAL_USART_TransmitReceive_DMA()

    • Update USART_SetConfig() API 
    • Split HAL_RCC_GetPCLK1Freq() and HAL_RCC_GetPCLK2Freq() macros from the USART_DIV_SAMPLING8() macro
    • Support Stop Mode functionalities in the USART driver  
    • Add  definition of USART_ISR_REACK USART,  receive enable acknowledge flag in the HAL driver
    • Add new flag definition in the LL driver 
      • LL_USART_ICR_WUCF  Wakeup from Stop mode flag 

      • LL_USART_ISR_WUF Wakeup from Stop mode flag 

      • LL_USART_ISR_REACK Receive enable acknowledge flag 

      • LL_USART_CR3_WUFIE Wakeup from Stop mode interrupt enable

    • Add new definition of the different event which activates the wakeup from Stop mode flag
      • LL_ USART_WAKEUP_ON_ADDRESS
      • LL_USART_WAKEUP_ON_STARTBIT

      • LL_USART_WAKEUP_ON_RXNE

    • Add new API in LL driver to support stop mode

      • LL_USART_EnableInStopMode() to enable the USART in stop mode

      • LL_USART_DisableInStopMode() to disable the USART in stop mode

      • LL_USART_IsEnabledInStopMode() to check if the USART is enabled or not in the stop mode

      • LL_USART_EnableClockInStopMode() to enable the USART clock in the stop mode

      • LL_USART_DisableClockInStopMode() to disable the USART clock in the stop mode

      • LL_USART_IsClockEnabledInStopMode() to check whether USART clock are enabled or not in the stop mode

    • Add new API in LL driver to manage event relisted to Wake UP Interrupt Flag

      • LL_USART_SetWKUPType() to select the event type for Wake UP Interrupt Flag

      • LL_USART_GetWKUPType() to get  the event type for Wake UP Interrupt Flag

      • LL_USART_IsActiveFlag_WKUP() to Check if the USART Wake Up from stop mode Flag is set or not

      • LL_USART_IsActiveFlag_REACK() to Check if the USART Receive Enable Acknowledge Flag is set or not

      • LL_USART_ClearFlag_WKUP() Clear Wake Up from stop mode Flag

    • Add new API in LL driver to manage wake up from stop interruption

      • LL_USART_EnableIT_WKUP() to Enable Wake Up from Stop Mode Interrupt

      • LL_USART_DisableIT_WKUP() to Disable Wake Up from Stop Mode Interrupt

      • LL_USART_IsEnabledIT_WKUP() to Check if the USART Wake Up from Stop Mode Interrupt is enabled or not

  • HAL/LL USB update
    •  Add handling USB host babble error interrupt
    •  Fix Enabling ULPI interface for platforms that integrates USB HS PHY
    •  Fix Host data toggling for IN Iso transfers
    •  Ensure to disable USB EP during endpoint deactivation

V1.2.7/ 08-February-2019

Main Changes

  • General updates to fix known defects and enhancements implementation
  • General updates to fix CodeSonar compilation warnings
  • General updates to fix SW4STM32 compilation errors under Linux
  • General updates to fix the user manual .chm files
  • Add support of HAL callback registration feature
  • Add new HAL EXTI driver
  • The following changes done on the HAL drivers require an update on the application code based on older HAL versions
    • Rework of HAL CRYP driver (compatibility break)
      • HAL CRYP driver has been redesigned with new API's, to bypass limitations on data Encryption/Decryption management present with previous HAL CRYP driver version.
      • The new HAL CRYP driver is the recommended version. It is located as usual in Drivers/STM32F7xx_HAL_Driver/Src and Drivers/STM32f7xx_HAL_Driver/Inc folders. It can be enabled through switch HAL_CRYP_MODULE_ENABLED in stm32f7xx_hal_conf.h
      • The legacy HAL CRYP driver is no longer supported.
  • HAL/LL Generic update
    • Add support of HAL callback registration feature
      • The feature disabled by default is available for the following HAL drivers:
        • ADC, CAN, CEC, CRYP, DAC, DCMI, DFSDM, DMA2D, DSI, ETH, HASH, HCD, I2C, SMBUS, UART, USART, IRDA, JPEG, SMARTCARD, LPTIM, LTDC, MDIOS, MMC, NAND, NOR, PCD, QSPI, RNG, RTC, SAI, SD, SDRAM, SRAM, SPDIFRX, SPI, I2S, TIM and WWDG
      • The feature may be enabled individually per HAL PPP driver by setting the corresponding definition USE_HAL_PPP_REGISTER_CALLBACKS to 1U in stm32f7xx_hal_conf.h project configuration file (template file stm32f7xx_hal_conf_template.h available from  Drivers/STM32F7xx_HAL_Driver/Inc)
      • Once enabled , the user application may resort to HAL_PPP_RegisterCallback() to register specific callback function(s) and unregister it(them) with HAL_PPP_UnRegisterCallback().
    • General updates to fix MISRA 2012 compilation errors
      • HAL_IS_BIT_SET()/HAL_IS_BIT_CLR() macros implementation update
      • "stdio.h" include updated with "stddef.h"
  • HAL GPIO Update
    • HAL_GPIO_TogglePin() API implementation update: to improve robustness
    • HAL_GPIO_DeInit() API update to ensure clear all GPIO EXTI pending interrupts.
    • HAL CRYP update
      • The CRYP_InitTypeDef is no more supported, changed by CRYP_ConfigTypedef to allow changing parameters
        using HAL_CRYP_setConfig() API without reinitialize the CRYP IP using the HAL_CRYP_Init() API
      • New parameters added in the CRYP_ConfigTypeDef structure: B0 and DataWidthUnit
      • Input data size parameter is added in the CRYP_HandleTypeDef structure
      • Add new APIs to manage the CRYP configuration:
        •  HAL_CRYP_SetConfig()
        • HAL_CRYP_GetConfig()
      • Add new APIs to manage the Key derivation:
        • HAL_CRYPEx_EnableAutoKeyDerivation()
        • HAL_CRYPEx_DisableAutoKeyDerivation()
      • Add new APIs to encrypt and decrypt data:
        • HAL_CRYP_Encypt()
        • HAL_CRYP_Decypt()
        • HAL_CRYP_Encypt_IT()
        • HAL_CRYP_Decypt_IT()
        • HAL_CRYP_Encypt_DMA()
        • HAL_CRYP_Decypt_DMA()
      • Add new APIs to generate TAG:
        • HAL_CRYPEx_AESGCM_GenerateAuthTAG()
        • HAL_CRYPEx_AESCCM_GenerateAuthTAG()
    • HAL I2C update
      • I2C API changes for MISRA-C 2012 compliancy:
        • Rename HAL_I2C_Master_Sequential_Transmit_IT() to HAL_I2C_Master_Seq_Transmit_IT()
        • Rename HAL_I2C_Master_Sequentiel_Receive_IT() to HAL_I2C_Master_Seq_Receive_IT()
        • Rename HAL_I2C_Slave_Sequentiel_Transmit_IT() to HAL_I2C_Slave_Seq_Transmit_IT()
        • Rename HAL_I2C_Slave_Sequentiel_Receive_DMA() to HAL_I2C_Slave_Seq_Receive_DMA()
      • Add support of I2C repeated start feature in DMA Mode:
        • With the following new API's
          • HAL_I2C_Master_Seq_Transmit_DMA()
          • HAL_I2C_Master_Seq_Receive_DMA()
          • HAL_I2C_Slave_Seq_Transmit_DMA()
          • HAL_I2C_Slave_Seq_Receive_DMA()
      • Add new I2C transfer options to easy manage the sequential transfers
        • I2C_OTHER_FRAME
        • I2C_OTHER_AND_LAST_FRAME
    • LL  RCC update
      • Update LL_RCC_GetSAIClockFreq() API to return the right frequency according to the SAI clock source
    • HAL RNG update
      • Update to manage RNG error code:
        • Add ErrorCode parameter in HAL RNG Handler structure
        • Add HAL_RNG_GetError() API
      • HAL Lock/Unlock mecanism update
    • LL ADC update
      • Fix VREFINT/TEMPSENSOR calibration address registers for STM32F74x/75x/F76/F77 devices
        • Note: For STM32F72/F73 the issue will be fixed in next release
      • HAL_ADC_Start(), HAL_ADC_Start_IT() and HAL_ADC_Start_DMA() update to prevention from starting ADC2 or ADC3 once multimode is enabled
    • HAL DFSDM  update
      • General updates to be compliant with DFSDM bits naming used in CMSIS files.
    • HAL CAN  update
      • Update possible values list for FilterActivation parameter in CAN_FilterTypeDef structure
        • CAN_FILTER_ENABLE instead of ENABLE
        • CAN_FILTER_DISABLE instead of DISABLE
    • HAL CEC  update
      • Update HAL CEC State management method:
        • Remove HAL_CEC_StateTypeDef structure parameters
        • Add new defines for CEC states
    • HAL DMA2D  update
      • Remove unused DMA2D_ColorTypeDef structure to be compliant with MISRAC 2012 Rule 2.3
      • General update to use dedicated defines for DMA2D_BACKGROUND_LAYER and DMA2D_FOREGROUND_LAYER instead of numerical values: 0/1.
        • HAL/LL RTC update
          • HAL/ LL drivers optimization
            • HAL driver: remove unused variables
            • LL driver: getter APIs optimization
        • HAL JPEG update
          • Update parameters type in JPEG_ConfTypeDef structure to be aligned with 32-bits
        • HAL SPI update
          • Overall rework of the driver for a more efficient implementation
          • Add the following new macros:
            • SPI_CHECK_FLAG()
            • SPI_CHECK_IT_SOURCE()
          • Add HAL_SPIEx_FlushRxFifo() API to flush the SPI FIFO RX.
          • Update HAL_SPI_Abort() to fix abort issue in SPI TX or Rx mode only
          • Update HAL_SPI_Transmit()/HAL_SPI_Receive() API's to fix memory overflow issue.
        • HAL I2S update
          • Overall rework of the driver for a more efficient implementation
          • Add the following new macros:
            • I2S_CHECK_FLAG()
            • I2S_CHECK_IT_SOURCE()
          • Update HAL_I2S_Transmit()/HAL_I2S_Receive() API's to fix memory overflow issue.
        • HAL/LL TIM update
          • Move the following TIM structures from stm32f4xx_hal_tim_ex.h into stm32f4xx_hal_tim.h
            • TIM_MasterConfigTypeDef
            • TIM_BreakDeadTimeConfigTypeDef
          • Add new TIM Callbacks API's:
            • HAL_TIM_PeriodElapsedHalfCpltCallback()
            • HAL_TIM_IC_CaptureHalfCpltCallback()
            • HAL_TIM_PWM_PulseFinishedHalfCpltCallback()
            • HAL_TIM_TriggerHalfCpltCallback()
          • TIM API changes for MISRA-C 2012 compliancy:
            • Rename HAL_TIM_SlaveConfigSynchronization to HAL_TIM_SlaveConfigSynchro
            • Rename HAL_TIM_SlaveConfigSynchronization_IT to HAL_TIM_SlaveConfigSynchro_IT
            • Rename HAL_TIMEx_ConfigCommutationEvent to HAL_TIMEx_ConfigCommutEvent
            • Rename HAL_TIMEx_ConfigCommutationEvent_IT to HAL_TIMEx_ConfigCommutEvent_IT
            • Rename HAL_TIMEx_ConfigCommutationEvent_DMA to HAL_TIMEx_ConfigCommutEvent_DMA
            • Rename HAL_TIMEx_CommutationCallback to HAL_TIMEx_CommutCallback
            • Rename HAL_TIMEx_DMACommutationCplt to TIMEx_DMACommutationCplt
        • HAL UART update
          • Overall rework of the driver for a more efficient implementation
          • Add the following UART API's in stm32f7xx_hal_uart_ex.c:
            •  HAL_RS485Ex_Init()
            • HAL_MultiProcessorEx_AddressLength_Set()
        • HAL/LL USB update
          • Rework USB interrupt handler and improve HS DMA support in Device mode
          • Fix BCD handling for OTG instance in device mode
          • cleanup reference to low speed in device mode
          • allow writing TX FIFO in case of transfer length is equal to available space in the TX FIFO
          • Fix Toggle OUT interrupt channel in host mode
        • LL IWDG update
          • Update LL inline macros to use IWDGx parameter instead of IWDG instance defined in CMSIS device

        V1.2.6 / 29-June-2018

        Main Changes

        • Update to support STM32F730xx and STM32F750xx value lines
        • HAL DMA update
          • DMA_CHANNEL_8 to DMA_CHANNEL_15 are also defined in case of STM32F730xx (same features as STM32F733xx line)
        • HAL FLASH update
          • Add support of STM32F730xx with 4 FLash sectors of 16KB each.
          • Add support of STM32F750xx with 2 FLash sectors of 32KB each.
        • HAL GPIO update
          • Add support of STM32F730xx value line : same features as STM32F733xx line
          • Add support of STM32F750xx value line : same features as STM32F756xx line
        • HAL RCC update
          • Add support of STM32F730xx value line : same features as STM32F733xx line
          • Add support of STM32F750xx value line : same features as STM32F756xx line

        V1.2.5 / 02-February-2018

        Main Changes

        • General updates to fix known defects and enhancements implementation
        • HAL update
          • Add new macro to get variable aligned on 32-bytes, required for cache maintenance purpose
          • Update UNUSED() macro implementation to avoid GCC warning
            • The warning is detected when the UNUSED() macro is called from C++ file
        • HAL SAI update
          • Update HAL_SAI_DMAStop() and HAL_SAI_Abort() process to fix the lock/unlock audio issue
        • HAL PWR update
          • Update HAL_PWR_EnterSLEEPMode() and HAL_PWR_EnterSTOPMode() APIs to ensure that all instructions finished before entering STOP mode.
        • HAL HCD update
          • Add new callback to be used to handle usb device connection/disconnection
            • HAL_HCD_PortEnabled_Callback()
            • HAL_HCD_PortDisabled_Callback()
          • Update to prevent reactivate host interrrupt channel

        V1.2.4 / 22-December-2017

        Main Changes

        • General updates to fix known defects and enhancements implementation
        • The following changes done on the HAL drivers require an update on the application code based on older HAL versions
          • Rework of HAL CAN driver (compatibility break) 
            • A new HAL CAN driver has been redesigned with new APIs, to bypass limitations on CAN Tx/Rx FIFO management present with previous HAL CAN driver version.
            • The new HAL CAN driver is the recommended version. It is located as usual in Drivers/STM32F7xx_HAL_Driver/Src and Drivers/STM32f7xx_HAL_Driver/Inc folders. It can be enabled through switch HAL_CAN_MODULE_ENABLED in stm32f7xx_hal_conf.h
            • The legacy HAL CAN driver is also present in the release in Drivers/STM32F7xx_HAL_Driver/Src/Legacy and Drivers/STM32F7xx_HAL_Driver/Inc/Legacy folders for software compatibility reasons. Its usage is not recommended as deprecated. It can however be enabled through switch HAL_CAN_LEGACY_MODULE_ENABLED in stm32f7xx_hal_conf.h
        • HAL update
          • Update HAL driver to allow user to change systick period to 1ms , 10 ms or 100 ms :
            • Add the following API's :  
              • HAL_GetTickPrio() : Returns a tick priority.
              • HAL_SetTickFreq() : Sets new tick frequency.
              • HAL_GetTickFreq() : Returns tick frequency.
            • Add HAL_TickFreqTypeDef enumeration for the different Tick Frequencies : 10 Hz , 100 Hz and 1KHz (default).
        • HAL CAN update
          • Fields of CAN_InitTypeDef structure are reworked:
            • SJW to SyncJumpWidth, BS1 to TimeSeg1, BS2 to TimeSeg2, TTCM to TimeTriggeredMode, ABOM to AutoBusOff, AWUM to AutoWakeUp, NART to AutoRetransmission (inversed), RFLM to ReceiveFifoLocked and TXFP to TransmitFifoPriority
          • HAL_CAN_Init() is split into both HAL_CAN_Init() and HAL_CAN_Start() API's
          • HAL_CAN_Transmit() is replaced by HAL_CAN_AddTxMessage() to place Tx Request, then HAL_CAN_GetTxMailboxesFreeLevel() for polling until completion.
          • HAL_CAN_Transmit_IT() is replaced by HAL_CAN_ActivateNotification() to enable transmit IT, then HAL_CAN_AddTxMessage() for place Tx request.
          • HAL_CAN_Receive() is replaced by HAL_CAN_GetRxFifoFillLevel() for polling until reception, then HAL_CAN_GetRxMessage()
            to get Rx message.
          • HAL_CAN_Receive_IT() is replaced by HAL_CAN_ActivateNotification() to enable receive IT, then HAL_CAN_GetRxMessage()
            in the receivecallback to get Rx message
          • HAL_CAN_Slepp() is renamed as HAL_CAN_RequestSleep()
          • HAL_CAN_TxCpltCallback() is split into HAL_CAN_TxMailbox0CompleteCallback(), HAL_CAN_TxMailbox1CompleteCallback() and HAL_CAN_TxMailbox2CompleteCallback().
          • HAL_CAN_RxCpltCallback is split into HAL_CAN_RxFifo0MsgPendingCallback() and HAL_CAN_RxFifo1MsgPendingCallback().
          • More complete "How to use the new driver" is detailed in the driver header section itself.
        • HAL RCC update
            • Add new LL macro
              • LL_RCC_PLL_SetMainSource() allowing to configure PLL clock source
            • Add new HAL macros
              • __HAL_RCC_GET_RTC_SOURCE() allowing to get the RTC clock source
              • __HAL_RCC_GET_RTC_HSE_PRESCALER() allowing to get the HSE clock divider for RTC peripheral
            • Ensure reset of CIR and CSR registers when issuing HAL_RCC_DeInit()/LL_RCC_DeInit functions
            • Update HAL_RCC_GetSysClockFreq() to avoid risk of rounding error which may leads to a wrong returned value. 
            • Update HAL_RCC_DeInit()  and LL_RCC_DeInit() APIs to
              • Be able to return HAL/LL status
              • Add checks for HSI, PLL and PLLI2S  ready before modifying RCC CFGR registers
              • Clear all interrupt flags
              • Initialize systick interrupt period
        • HAL DMA update
          • Add clean of callbacks in HAL_DMA_DeInit() API
          • Fix wrong DMA_FLAG_FEIFO_4 and DMA_FLAGDMAEIFO_4 defines values 
        • HAL I2C update
          • Update Interface APIs headers to remove confusing message about device address
          • Update I2C_WaitOnRXNEFlagUntilTimeout() to resolve a race condition between STOPF and RXNE Flags
          • Update I2C_TransferConfig() to fix wrong bit management
        • LL USART update
          • Add assert macros to check USART BaudRate register
        • HAL ETH update
          • Do{..} While(0) insured in multi statement macros :
            • __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() 
            • __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER()
        • HAL FLASH update
          • HAL_FLASH_Unlock() update to return state error when the FLASH is already unlocked
        • HAL GPIO update
          • Add missing define of GPIO_PIN_2 in GPIOK_PIN_AVAILABLE list
        • HAL PCD update
          • Do{..} While(0)  insured in multi statement macros
        • LL UTILS update
          • stm32f7xx_ll_utils.h : Update LL_GetPackageType command to return uint32_t instead of uint16_t
        • HAL TIM update
          • stm32f7xx_hal_tim_ex.c : Update HAL_TIMEx_ConfigBreakDeadTime API to avoid to block timer behavior when
            remains in the state HAL_TIM_STATE_BUSY.
          •  stm32f7xx_hal_tim.h : 
            • Fix __HAL_TIM_SET_PRESCALER() macro
            • Fix typos in some exported macros description 
        • LL FMC update
          • HAL_SDRAM_SendCommand() API: Remove the timeout check
        • HAL NAND update
          • Fix wrong check for NAND status

        V1.2.3 / 25-August-2017

        Main Changes

        • General updates to fix known defects and enhancements implementation
        • Remove Date and Version from header files
        • Update HAL drivers to refer to the new CMSIS bit position defines instead of usage the POSITION_VAL() macro
        • HAL CAN update
          • Add missing unlock in HAL_CAN_Receive_IT() process
        • HAL DCMI update
          • HAL DCMI driver clean-up: remove non referenced callback APIs: HAL_DCMI_VsyncCallback() and HAL_DCMI_HsyncCallback()
        • HAL DFSDM update
          • Fix cast issue on APIs that return signed integer value (uint32_t) 
        • HAL DMA update
          • HAL DMA driver clean-up: remove non referenced callback APIs: HAL_DMA_CleanCallbacks()
        • HAL FLASH update
          • FLASH_Program_DoubleWord() API: Replace 64-bit accesses with 2 double words operations
        • HAL Generic update
          • Update assert_param() macro definition to be in line with stm32_ll_utils.c driver
        • HAL GPIO update
          • GPIOK_PIN_AVAILABLE() assert macro update to allow possibility to configure GPIO_PIN_2
        • HAL LTDC update
          • Rename HAL_LTDC_LineEvenCallback() API to HAL_LTDC_LineEventCallback()
        • HAL PCD update
          • Update HAL_PCD_IRQHandler() API to fix transfer issues when USB HS is used with DMA enabled
        • HAL RCC update
          • Update HAL_RCC_GetOscConfig() API to:
            • set PLLR in the RCC_OscInitStruct
            • check on null pointer
          • Update HAL_RCC_ClockConfig() API to:
            • check on null pointer
            • optimize code size by updating the handling method of the SWS bits
            • update to use  __HAL_FLASH_GET_LATENCY() flash macro instead of using direct register access to LATENCY bits in FLASH ACR register.
        • HAL SAI update
          • Update HAL_SAI_DMAStop() API to flush fifo after disabling SAI
        • HAL TIM update
          • Update HAL_TIMEx_ConfigBreakInput() API to support BKINP/BKIN2P polarity bits.
        • LL DMA update
          • Update SET_BIT() access to LIFCR and HIFCR registers by WRITE_REG() to avoid read access that is not allowed when clearing DMA flags
        • LL I2C update
          • Update LL_I2C_Init() API to avoid enabling own address1 when OwnAddress1 parameter value in the I2C_InitStruct is equal to 0.
        • LL TIM update
          • Update LL_TIM_EnableUpdateEvent() API to clear UDIS bit in CR1 register instead of setting it.
          • Update LL_TIM_DisableUpdateEvent() API to set UDIS bit in CR1 register instead of clearing it.
        • LL USB update
          • Update USB_EP0StartXfer() API to fix transfer issues when USB HS is used with DMA enabled

        V1.2.2 / 14-April-2017

        Main Changes

        • General updates to fix known defects and enhancements implementation
        • HAL CAN update
          • Add management of overrun error. 
          • Allow possibility to receive messages from the 2 RX FIFOs in parallel via interrupt.
          • Fix message lost issue with specific sequence of transmit requests.
          • Handle transmission failure with error callback, when NART is enabled.
          • Add __HAL_CAN_CANCEL_TRANSMIT() call to abort transmission when timeout is reached

        V1.2.1 / 24-March-2017

        Main Changes

        • Update CHM UserManuals to support LL drivers
        • General updates to fix known defects and enhancements implementation
        • HAL DMA update
          • Update HAL_DMA_Init() function to adjust the compatibility check between FIFO threshold and burst configuration
        • HAL MMC update
          • Update HAL_MMC_InitCard() function with proper initialization sequence adding a delay after MMC clock enable
          • Update MMC_DMAError() function ignore DMA FIFO error as not impacting the data transfer
        • HAL SD update
          • Update HAL_SD_InitCard() function with proper initialization sequence adding a delay after SD clock enable
          • Update SD_DMAError() function ignore DMA FIFO error as not impacting the data transfer
        • HAL NAND update
          • Update HAL_NAND_Address_Inc() function implementation for proper plane number check
        • LL SDMMC update
          • Update SDMMC_DATATIMEOUT value with appropriate value needed by reading and writing operations of SD and MMC cards
        • LL RTC update
          • LL_RTC_TIME_Get() and LL_RTC_DATE_Get() inline macros optimization
        • LL ADC update
          • Fix wrong ADC group injected sequence configuration
            • LL_ADC_INJ_SetSequencerRanks() and LL_ADC_INJ_GetSequencerRanks() API's update to take in consideration the ADC number of conversions
            • Update the defined values for ADC group injected seqencer ranks 

        V1.2.0 / 30-December-2016

        Main Changes

        • Official release to add the support of STM32F722xx, STM32F723xx, STM32F732xx and STM32F733xx devices
        • Add Low Layer drivers allowing performance and footprint optimization
          • Low Layer drivers APIs provide register level programming: require deep knowledge of peripherals described in STM32F7xx Reference Manuals
          • Low Layer drivers are available for: ADC, Cortex, CRC, DAC, DMA, DMA2D, EXTI, GPIO, I2C, IWDG, LPTIM, PWR, RCC, RNG, RTC, SPI, TIM, USART, WWDG peripherals and additionnal Low Level Bus, System and Utilities APIs.
          • Low Layer drivers APIs are implemented as static inline function in new Inc/stm32f7xx_ll_ppp.h files for PPP peripherals, there is no configuration file and each stm32f7xx_ll_ppp.h file must be included in user code.
        • General updates to fix known defects and enhancements implementation
        • Add new HAL MMC and SMBUS drivers
        • HAL Cortex update
          • Move HAL_MPU_Disable() and HAL_MPU_Enable() from stm32f7xx_hal_cortex.h to stm32f7xx_hal_cortex.c
          • Clear the whole MPU control register in HAL_MPU_Disable() API
        • HAL CRYP update
          • Add support of AES
        • HAL DMA update
          • Add a check on DMA stream instance in HAL_DMA_DeInit() API
        • HAL ETH update 
          • Fix wrong definitions in driver header file stm32f7_hal_eth.h
        • HAL FLASH update
          • Support OTP program operation
          • Add the support of PCROP feature
          • Update the clearing of error flags
        • HAL I2C update
          • Align driver source code with other STM32 families
        • HAL JPEG update 
          • Update the output data management when HAL_JPEG_Pause() is performed during the last data sending
        • HAL RCC update
          • Enable PWR only if necessary for LSE configuration in HAL_RCC_OscConfig() API
          • Rename RCC_LPTIM1CLKSOURCE_PCLK define to RCC_LPTIM1CLKSOURCE_PCLK1
          • Rename RCC_DFSDM1CLKSOURCE_PCLK define to RCC_DFSDM1CLKSOURCE_PCLK2
        • HAL SPI update
          • Clear RX FIFO at the end of each transaction
        • HAL UART update
          • Remove USART_CR2_LINEN bit clearing when initializing in synchronous mode
        • HAL USB update
          • Add support of embedded USB PHY Controller
          • Add support of Battery Charging Detector (BCD) feature
        • LL SDMMC update
          • Add new SDMMC_CmdSDEraseStartAdd, SDMMC_CmdSDEraseEndAdd, SDMMC_CmdOpCondition and SDMMC_CmdSwitch functions
        • LL USB update
          • Update PENA bit clearing in OTG_HPRT0 register
        • The following changes done on the HAL drivers require an update on the application code based on older HAL versions
          • HAL SD update
            • Overall rework of the driver for a more efficient implementation
              • Modify initialization API and structures
              • Modify Read / Write sequences: separate transfer process and SD Cards state management 
              • Adding interrupt mode for Read / Write operations
              • Update the HAL_SD_IRQHandler function by optimizing the management of interrupt errors
            • Refer to the following example to identify the changes: BSP example and USB_Device/MSC_Standalone application
          • HAL TIM update
            • Add new AutoReloadPreload field in TIM_Base_InitTypeDef structure
            • Refer to the TIM examples to identify the changes 
          • HAL NAND update
            • Modify NAND_AddressTypeDef, NAND_DeviceConfigTypeDef and NAND_HandleTypeDef structures fields
            • Add new HAL_NAND_ConfigDevice API

        V1.1.1 / 01-July-2016

        Main Changes

        • HAL DMA update 
          • Update HAL_DMA_PollForTransfer() function implementation to avoid early TIMEOUT error.
        • HAL JPEG update
          • Update HAL_JPEG_ConfigEncoding() function to properly set the ImageHeight and ImageWidth
        • HAL SPI update
          • Update SPI_DMATransmitReceiveCplt() function to properly handle the CRC and avoid conditional statement duplication

        V1.1.0 / 22-April-2016

        Main Changes

        • Official release to add the support of STM32F765xx, STM32F767xx, STM32F768xx, STM32F769xx, STM32F777xx, STM32F778xx and STM32F779xx devices
        • General updates to fix known defects and enhancements implementation
        • Add new HAL drivers for DFSDM, DSI, JPEG and MDIOS peripherals
        • Enhance HAL delay and timebase implementation
          • Add new drivers stm32f7xx_hal_timebase_tim_template.c, stm32f7xx_hal_timebase_rtc_alarm_template.c and stm32f7xx_hal_timebase_rtc_wakeup_template.c which override the native HAL time base functions (defined as weak) to either use the TIM or the RTC as time base tick source. For more details about the usage of these drivers, please refer to HAL\HAL_TimeBase examples and FreeRTOS-based applications
        • The following changes done on the HAL drivers require an update on the application code based on HAL V1.0.4
          • HAL UART, USART, IRDA, SMARTCARD, SPI, I2C, QSPI (referenced as PPP here below) drivers
            • Add PPP error management during DMA process. This requires the following updates on user application:
              • Configure and enable the PPP IRQ in HAL_PPP_MspInit() function
              • In stm32f7xx_it.c file, PPP_IRQHandler() function: add a call to HAL_PPP_IRQHandler() function
              • Add and customize the Error Callback API: HAL_PPP_ErrorCallback()
          • HAL I2C (referenced as PPP here below) drivers:
            • Update to avoid waiting on STOPF/BTF/AF flag under DMA ISR by using the PPP end of transfer interrupt in the DMA transfer process. This requires the following updates on user application:
              • Configure and enable the PPP IRQ in HAL_PPP_MspInit() function
              • In stm32f7xx_it.c file, PPP_IRQHandler() function: add a call to HAL_PPP_IRQHandler() function
          • HAL IWDG driver: rework overall driver for better implementation
            • Remove HAL_IWDG_Start(), HAL_IWDG_MspInit() and HAL_IWDG_GetState() APIs
          • HAL WWDG driver: rework overall driver for better implementation
            • Remove HAL_WWDG_Start(), HAL_WWDG_Start_IT(), HAL_WWDG_MspDeInit() and HAL_WWDG_GetState() APIs 
            • Update the HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t counter)  function and API  by removing the  "counter" parameter
          • HAL QSPI driver:  Enhance the DMA transmit process by using PPP TC interrupt instead of waiting on TC flag under DMA ISR. This requires the following updates on user application:
            • Configure and enable the QSPI IRQ in HAL_QSPI_MspInit() function
            • In stm32f7xx_it.c file, QSPI_IRQHandler() function: add a call to HAL_QSPI_IRQHandler() function
          • HAL CEC driver:  Overall driver rework with compatibility break versus previous HAL version
            • Remove HAL CEC polling Process functions: HAL_CEC_Transmit() and HAL_CEC_Receive()
            • Remove HAL CEC receive interrupt process function HAL_CEC_Receive_IT() and enable the "receive"  mode during the Init phase
            • Rename HAL_CEC_GetReceivedFrameSize() funtion to HAL_CEC_GetLastReceivedFrameSize()
            • Add new HAL APIs: HAL_CEC_SetDeviceAddress() and HAL_CEC_ChangeRxBuffer()
            • Remove the 'InitiatorAddress' field from the CEC_InitTypeDef structure and manage it as a parameter in the HAL_CEC_Transmit_IT() function
            • Add new parameter 'RxFrameSize' in HAL_CEC_RxCpltCallback() function
            • Move CEC Rx buffer pointer from CEC_HandleTypeDef structure to CEC_InitTypeDef structure
        • HAL CAN update 
          • Add the support of CAN3
        • HAL CEC update
          • Overall driver rework with break of compatibility with HAL V1.0.4
            • Remove the HAL CEC polling Process: HAL_CEC_Transmit() and HAL_CEC_Receive()
            • Remove the HAL CEC receive interrupt process (HAL_CEC_Receive_IT()) and manage the "Receive" mode enable within the Init phase
            • Rename HAL_CEC_GetReceivedFrameSize() function to HAL_CEC_GetLastReceivedFrameSize() function
            • Add new HAL APIs: HAL_CEC_SetDeviceAddress() and HAL_CEC_ChangeRxBuffer()
            • Remove the 'InitiatorAddress' field from the CEC_InitTypeDef structure and manage it as a parameter in the HAL_CEC_Transmit_IT() function
            • Add new parameter 'RxFrameSize' in HAL_CEC_RxCpltCallback() function
            • Move CEC Rx buffer pointer from CEC_HandleTypeDef structure to CEC_InitTypeDef structure
          • Update driver to implement the new CEC state machine:
            • Add new "rxState" field in CEC_HandleTypeDef structure to provide the CEC state information related to Rx Operations
            • Rename "state" field in CEC_HandleTypeDef structure to "gstate": CEC state information related to global Handle management and Tx Operations
            • Update CEC process to manage the new CEC states.
            • Update __HAL_CEC_RESET_HANDLE_STATE() macro to handle the new CEC state parameters (gState, rxState)
        • HAL DMA update 
          • Add new APIs HAL_DMA_RegisterCallback() and HAL_DMA_UnRegisterCallback to register/unregister the different callbacks identified by the enum typedef HAL_DMA_CallbackIDTypeDef
          • Add new API HAL_DMA_Abort_IT() to abort DMA transfer under interrupt context
            • The new registered Abort callback is called when DMA transfer abortion is completed
          • Add the check of compatibility between FIFO threshold level and size of the memory burst in the HAL_DMA_Init() API
          • Add new Error Codes: HAL_DMA_ERROR_PARAM, HAL_DMA_ERROR_NO_XFER and HAL_DMA_ERROR_NOT_SUPPORTED
          • Remove all DMA states related to MEM0/MEM1 in HAL_DMA_StateTypeDef
        • HAL DMA2D update 
          • Update the HAL_DMA2D_DeInit() function to:
            • Abort transfer in case of ongoing DMA2D transfer
            • Reset DMA2D control registers
          • Update HAL_DMA2D_Abort() to disable DMA2D interrupts after stopping transfer
          • Optimize HAL_DMA2D_IRQHandler() by reading status registers only once
          • Update HAL_DMA2D_ProgramLineEvent() function to:
            • Return HAL error state in case of wrong line value
            • Enable line interrupt after setting the line watermark configuration
          • Add new HAL_DMA2D_CLUTLoad() and HAL_DMA2D_CLUTLoad_IT() functions to start DMA2D CLUT loading
            • HAL_DMA2D_CLUTLoading_Abort() function to abort the DMA2D CLUT loading
            • HAL_DMA2D_CLUTLoading_Suspend() function to suspend the DMA2D CLUT loading
            • HAL_DMA2D_CLUTLoading_Resume() function to resume the DMA2D CLUT loading
          • Add new DMA2D dead time management:
            • HAL_DMA2D_EnableDeadTime() function to enable DMA2D dead time feature
            • HAL_DMA2D_DisableDeadTime() function to disable DMA2D dead time feature
            • HAL_DMA2D_ConfigDeadTime() function to configure dead time
          • Update the name of DMA2D Input/Output color mode defines to be more clear for user (DMA2D_INPUT_XXX for input layers Colors, DMA2D_OUTPUT_XXX for output framebuffer Colors)
        • HAL DCMI update 
          • Rename DCMI_DMAConvCplt to DCMI_DMAXferCplt
          • Update HAL_DCMI_Start_DMA() function to Enable the DCMI peripheral
          • Add new timeout implementation based on cpu cycles for DCMI stop
          • Add HAL_DCMI_Suspend() function to suspend DCMI capture
          • Add HAL_DCMI_Resume() function to resume capture after DCMI suspend
          • Update lock mechanism for DCMI process
          • Update HAL_DCMI_IRQHandler() function to:
            • Add error management in case DMA errors through XferAbortCallback() and HAL_DMA_Abort_IT()
            • Optimize code by using direct register read
          • Move the content of the stm32f7xx_hal_dcmi_ex.c/.h files to common driver files (the extension files are kept empty for projects compatibility reason)
        • HAL FLASH update 
          • Add the support of Dual BANK feature
          • Add __HAL_FLASH_CALC_BOOT_BASE_ADR() macro to calculate the FLASH Boot Base Adress
          • Move Flash total sector define to CMSIS header files
        • HAL FMC update
          • Update FMC_NORSRAM_Init() to remove the Burst access mode configuration
          • Update FMC_SDRAM_Timing_Init() to fix initialization issue when configuring 2 SDRAM banks
        • HAL HCD update
          • Update HCD_Port_IRQHandler() to be compliant with new Time base implementation
        • HAL I2C update
          • Add the support of I2C fast mode plus (FM+)
          • Update Polling management:
            • The Timeout value must be estimated for the overall process duration: the Timeout measurement is cumulative
          • Add the management of Abort service: Abort DMA transfer through interrupt
            • In the case of Master Abort IT transfer usage:
              • Add new user HAL_I2C_AbortCpltCallback() to inform user of the end of abort process
              • A new abort state is defined in the HAL_I2C_StateTypeDef structure
          • Add the management of I2C peripheral errors, ACK failure and STOP condition detection during DMA process. This requires the following updates on user application:
            • Configure and enable the I2C IRQ in HAL_I2C_MspInit() function
            • In stm32f7xx_it.c file, I2C_IRQHandler() function: add a call to HAL_I2C_IRQHandler() function
            • Add and customize the Error Callback API: HAL_I2C_ErrorCallback()
            • Refer to the I2C_EEPROM or I2C_TwoBoards_ComDMA project examples usage of the API
          • Add the support of I2C repeated start feature:
            • With the following new APIs
              • HAL_I2C_Master_Sequential_Transmit_IT()
              • HAL_I2C_Master_Sequential_Receive_IT()
              • HAL_I2C_Master_Abort_IT()
              • HAL_I2C_Slave_Sequential_Transmit_IT()
              • HAL_I2C_Slave_Sequential_Receive_IT()
              • HAL_I2C_EnableListen_IT()
              • HAL_I2C_DisableListen_IT()
            • Add new user callbacks:
              • HAL_I2C_ListenCpltCallback()
              • HAL_I2C_AddrCallback()
          • Several updates on HAL I2C driver to implement the new I2C state machine:
            • Add new API to get the I2C mode: HAL_I2C_GetMode()
            • Update I2C process to manage the new I2C states
        • HAL IWDG update
          • Overall rework of the driver for a more efficient implementation
            • Remove the following APIs:
              • HAL_IWDG_Start()
              • HAL_IWDG_MspInit()
              • HAL_IWDG_GetState()
            • Update implementation:
              • HAL_IWDG_Init() : this function insures the configuration and the start of the IWDG counter
              • HAL_IWDG_Refresh() : this function insures the reload of the IWDG counter
            • Refer to the following example to identify the changes: IWDG_Example
        • HAL LPTIM update
          • Update HAL_LPTIM_TimeOut_Start_IT() and HAL_LPTIM_Counter_Start_IT( ) APIs to configure WakeUp Timer EXTI interrupt to be able to wakeup MCU from low power mode by pressing the EXTI line
          • Update HAL_LPTIM_TimeOut_Stop_IT() and HAL_LPTIM_Counter_Stop_IT( ) APIs to disable WakeUp Timer EXTI interrupt
        • HAL LTDC update
          • Update HAL_LTDC_IRQHandler() to manage the case of reload interrupt
          • Add LTDC extension driver needed with DSI
          • Add HAL_LTDC_SetPitch() function for pitch reconfiguration
          • Add new callback API HAL_LTDC_ReloadEventCallback()
          • Add HAL_LTDC_Reload() to configure LTDC reload feature
          • Add new No Reload LTDC variant APIs
            • HAL_LTDC_ConfigLayer_NoReload() to configure the LTDC Layer according to the specified without reloading
            • HAL_LTDC_SetWindowSize_NoReload() to set the LTDC window size without reloading
            • HAL_LTDC_SetWindowPosition_NoReload() to set the LTDC window position without reloading
            • HAL_LTDC_SetPixelFormat_NoReload() to reconfigure the pixel format without reloading
            • HAL_LTDC_SetAlpha_NoReload() to reconfigure the layer alpha value without reloading
            • HAL_LTDC_SetAddress_NoReload() to reconfigure the frame buffer Address without reloading
            • HAL_LTDC_SetPitch_NoReload() to reconfigure the pitch for specific cases
            • HAL_LTDC_ConfigColorKeying_NoReload() to configure the color keying without reloading
            • HAL_LTDC_EnableColorKeying_NoReload() to enable the color keying without reloading
            • HAL_LTDC_DisableColorKeying_NoReload() to disable the color keying without reloading
            • HAL_LTDC_EnableCLUT_NoReload() to enable the color lookup table without reloading
            • HAL_LTDC_DisableCLUT_NoReload() to disable the color lookup table without reloading
            • Note: Variant functions with “_NoReload” post fix allows to set the LTDC configuration/settings without immediate reload. This is useful in case when the program requires to modify several LTDC settings (on one or both layers) then applying (reload) these settings in one shot by calling the function “HAL_LTDC_Reload”
        • HAL NOR update
          • Update NOR_ADDR_SHIFT macro implementation
        • HAL PCD update
          • Update HAL_PCD_IRQHandler() to get HCLK frequency before setting TRDT value
        • HAL QSPI update
          • Update to manage QSPI error management during DMA process
          • Improve the DMA transmit process by using QSPI TC interrupt instead of waiting loop on TC flag under DMA ISR
          • These two improvements require the following updates on user application:
            • Configure and enable the QSPI IRQ in HAL_QSPI_MspInit() function
            • In stm32f7xx_it.c file, QSPI_IRQHandler() function: add a call to HAL_QSPI_IRQHandler() function
            • Add and customize the Error Callback API: HAL_QSPI_ErrorCallback()
          • Add the management of non-blocking transfer abort service: HAL_QSPI_Abort_IT(). In this case the user must:
            • Add new callback HAL_QSPI_AbortCpltCallback() to inform user at the end of abort process
            • A new value of State in the HAL_QSPI_StateTypeDef provides the current state during the abort phase
          • Polling management update:
            • The Timeout value user must be estimated for the overall process duration: the Timeout measurement is cumulative. 
          • Refer to the following examples, which describe the changes:
            • QSPI_ReadWrite_DMA
            • QSPI_MemoryMapped
            • QSPI_ExecuteInPlace
          • Add two new APIs for the QSPI fifo threshold:
            • HAL_QSPI_SetFifoThreshold(): configure the FIFO threshold of the QSPI
            • HAL_QSPI_GetFifoThreshold(): give the current FIFO threshold
          • Fix wrong data size management in HAL_QSPI_Receive_DMA()
        • HAL RCC update
          • Update HAL_RCC_PeriphCLKConfig() function to adjust the SystemCoreClock
          • Optimize HAL_RCC_ClockConfig() function code
          • Optimize internal oscillators and PLL startup times
        • HAL RTC update 
          • Update HAL_RTC_GetTime() with proper 'SubSeconds' and 'SecondFraction' management
        • HAL SAI update 
          • Update SAI state in case of TIMEOUT error within the HAL_SAI_Transmit() / HAL_SAI_Receive()
          • Update HAL_SAI_IRQHandler:
            • Add error management in case DMA errors through XferAbortCallback() and HAL_DMA_Abort_IT()
            • Add error management in case of IT
          • Move SAI_BlockSynchroConfig() and SAI_GetInputClock() functions to stm32f7xx_hal_sai.c/.h files (extension files are kept empty for projects compatibility reason)
        • HAL SPDIFRX update
          • Overall driver update for wait on flag management optimization
        • HAL SPI update
          • Overall driver optimization to improve performance in polling/interrupt mode to reach maximum peripheral frequency
            • Polling mode:
              • Replace the use of SPI_WaitOnFlagUnitTimeout() function by "if" statement to check on RXNE/TXE flage while transferring data
            •  Interrupt mode:
              • Minimize access on SPI registers
            • All modes:
              • Add the USE_SPI_CRC switch to minimize the number of statements when CRC calculation is disabled
              • Update timeout management to check on global processes
              • Update error code management in all processes
          • Update DMA process:
            • Add the management of SPI peripheral errors during DMA process. This requires the following updates in the user application:
              • Configure and enable the SPI IRQ in HAL_SPI_MspInit() function
              • In stm32f7xx_it.c file, SPI_IRQHandler() function: add a call to HAL_SPI_IRQHandler() function
              • Add and customize the Error Callback API: HAL_SPI_ErrorCallback()
              • Refer to the following example which describe the changes: SPI_FullDuplex_ComDMA
        • HAL TIM update 
          • Update HAL_TIM_ConfigOCrefClear() function for proper configuration of the SMCR register
          • Add new function HAL_TIMEx_ConfigBreakInput() to configure the break input source
        • HAL UART, USART, SMARTCARD and IRDA (referenced as PPP here below) update
          • Update Polling management:
            • The user Timeout value must be estimated for the overall process duration: the Timeout measurement is cumulative
          • Update DMA process:
            • Update the management of PPP peripheral errors during DMA process. This requires the following updates in user application:
              • Configure and enable the PPP IRQ in HAL_PPP_MspInit() function
              • In stm32f7xx_it.c file, PPP_IRQHandler() function: add a call to HAL_PPP_IRQHandler() function
              • Add and customize the Error Callback API: HAL_PPP_ErrorCallback()
        • HAL WWDG update 
          • Overall rework of the driver for more efficient implementation
            • Remove the following APIs:
              • HAL_WWDG_Start()
              • HAL_WWDG_Start_IT()
              • HAL_WWDG_MspDeInit()
              • HAL_WWDG_GetState()
            • Update implementation:
              • HAL_WWDG_Init()
                • A new parameter in the Init Structure: EWIMode
              • HAL_WWDG_MspInit()
              • HAL_WWDG_Refresh() 
                • This function insures the reload of the counter
                • The "counter" parameter has been removed
              • HAL_WWDG_IRQHandler()
              • HAL_WWDG_EarlyWakeupCallback() is the new prototype of HAL_WWDG_WakeupCallback()
          • Refer to the following example to identify the changes: WWDG_Example

        V1.0.4 / 09-December-2015

        Main Changes

        • HAL Generic update
          • Update HAL weak empty callbacks to prevent unused argument compilation warnings with some compilers by calling the following line:
            • UNUSED(hppp);
        • HAL ETH update 
          • Update HAL_ETH_Init() function to add timeout on the Software reset management

        V1.0.3 / 13-November-2015

        Main Changes

        • General updates to fix known defects and enhancements implementation
        • One change done on the HAL CRYP requires an update on the application code based on HAL V1.0.2
          • Update HAL_CRYP_DESECB_Decrypt() API to invert pPlainData and pCypherData parameters
        • HAL Generic update
          • Update HAL weak empty callbacks to prevent unused argument compilation warnings with some compilers by calling the following line:
            • UNUSED(hppp);
          • Remove references to STM32CubeMX and MicroXplorer from stm32f7xx_hal_msp_template.c file
        • HAL ADC update
          • Replace ADC_CHANNEL_TEMPSENSOR definition from ADC_CHANNEL_16 to ADC_CHANNEL_18  
          • Update HAL ADC driver state machine for code efficiency
          • Add new literal: ADC_INJECTED_SOFTWARE_START to be used as possible value for the ExternalTrigInjecConvEdge parameter in the ADC_InitTypeDef structure to select the ADC software trigger mode.
        • HAL CORTEX update
          • Remove duplication for __HAL_CORTEX_SYSTICKCLK_CONFIG() macro
        • HAL CRYP update
          • Update HAL_CRYP_DESECB_Decrypt() API to fix the inverted pPlainData and pCypherData parameters issue
        • HAL FLASH update
          • Update OB_IWDG_STOP_ACTIVE definition
          • Update OB_RDP_LEVEL_x definition by proper values
          • Update FLASH_MassErase() function to consider the voltage range parameter in the mass erase configuration
        • HAL RCC update
          • update values for LSE Drive capability defines
          • update PLLN min value 50 instead of 100
          • add RCC_PLLI2SP_DIVx defines for PLLI2SP clock divider
          • Update __HAL_RCC_USB_OTG_FS_CLK_DISABLE() macro to remove the disable of the SYSCFG 
          • Update HAL_RCCEx_GetPeriphCLKFreq() function for proper SAI clock configuration
        • HAL SAI update
          • update for proper management of the external synchronization input selection
            • update of HAL_SAI_Init () funciton
            • update definition of SAI_Block_SyncExt and SAI_Block_Synchronization groups
          • update SAI_SLOTACTIVE_X  defines values
          • update HAL_SAI_Init() function for proper companding mode management
          • update SAI_Transmit_ITxxBit() functions to add the check on transfer counter before writing new data to SAIx_DR registers
          • update SAI_FillFifo() function to avoid issue when the number of data to transmit is smaller than the FIFO size
          • update HAL_SAI_EnableRxMuteMode() function for proper mute management
          • update SAI_InitPCM() function to support 24bits configuration
        • HAL SD update
          • update HAL_SD_Get_CardInfo() to properly support high capacity cards
        • HAL SPDIFRX update
          • update SPDIFRX_DMARxCplt() function implementation to check on circular mode before disabling the DMA
        • HAL TIM update
          • Update HAL_TIM_ConfigClockSource() function implementation for proper parameters check
        • HAL UART update
          • Update __HAL_UART_CLEAR_IT macro for proper functionning 
        • ll FMC update
          • add FMC_PAGE_SIZE_512 define
        • ll SDMMC update
          • update SDMMC_SetSDMMCReadWaitMode() function for proper functionning

        V1.0.2 / 21-September-2015

        Main Changes

        • HAL Generic update
          • stm32f7xx_hal.conf_template.h: update HSE_STARTUP_TIMEOUT
          • stm32f7xx_hal_def.h: update the quotation marks used in #error"USE_RTOS should be 0 in the current HAL release"
        • HAL DMA update
          • Overall driver update for code optimization
            • add StreamBaseAddress and StreamIndex new fields in the DMA_HandleTypeDef structure
            • add DMA_Base_Registers private structure
            • add static function DMA_CalcBaseAndBitshift()
            • update HAL_DMA_Init() function to use the new added static function
            • update HAL_DMA_DeInit() function to optimize clear flag operations
            • update HAL_DMA_Start_IT() function to optimize interrupts enable
            • update HAL_DMA_PollForTransfer() function to optimize check on flags
            • update HAL_DMA_IRQHandler() function to optimize interrupt flag management
        • HAL ETH update
          • remove duplicated macro IS_ETH_RX_MODE()
        • HAL GPIO update
          • Rename GPIO_SPEED_LOW define to GPIO_SPEED_FREQ_LOW
          • Rename GPIO_SPEED_MEDIUM define to GPIO_SPEED_FREQ_MEDIUM
          • Rename GPIO_SPEED_FAST define to GPIO_SPEED_FREQ_HIGH
          • Rename GPIO_SPEED_HIGH define to GPIO_SPEED_FREQ_VERY_HIGH
        • HAL HASH update
          • Rename HAL_HASH_STATETypeDef to HAL_HASH_StateTypeDef
          • Rename HAL_HASH_PhaseTypeDef to HAL_HASHPhaseTypeDef
        • HAL RCC update
          • update values for LSE Drive capability defines
          • update PLLN/PLLI2SN/PLLSAI VCO min value 100MHz instead of 192MHz
          • add __HAL_RCC_MCO1_CONFIG() and __HAL_RCC_MCO2_CONFIG() macros
          • update HAL_RCCEx_PeriphCLKConfig() function to reset the Backup domain only if the RTC Clock source selection is modified 
        • HAL TIM update
          • update the implementation of __HAL_TIM_SET_COMPARE() macro
          • remove useless assert() in HAL_TIM_PWM_ConfigChannel(), TIM_OC2_SetConfig() and HAL_TIM_PWM_ConfigChannel() functions
        • HAL CAN update
          • add the clear flag ERRI bit in HAL_CAN_IRQHandler()
        • HAL I2S update
          • update I2S HAL_I2S_Transmit() API to keep the check on busy flag only for the slave
        • HAL QSPI update
          • Add __HAL_QSPI_CLEAR_FLAG() before QSPI_Config()
        • HAL UART update
          • Remove enabling of ERR IT source and PE source from HAL_UART_Transmit_IT() and remove the corresponding disabling ERR/PE IT from UART_EndTransmit_IT()
        • HAL PCD update 
          • Clean status phase received interrupt when DMA mode enabled 
        • HAL HCD update
          • Update to use local variable in USB Host channel re-activation
        • ll FMC update
          • update the define FMC Write FIFO Disable/Enable: FMC_WRITE_FIFO_DISABLE and FMC_WRITE_FIFO_ENABLE
          • remove return HAL_ERROR from FMC_SDRAM_SendCommand() function

        V1.0.1 / 25-June-2015

        Main Changes

        • General updates to fix known defects and enhancements implementation
        • HAL CRC update
          • update __HAL_CRC_SET_IDR() macro implementation to use WRITE_REG() instead of MODIFY_REG()
        • HAL CEC update
          • update timeout management in HAL_CEC_Transmit() and HAL_CEC_Receive() functions
        • HAL Cortex update
          • update HAL_MPU_ConfigRegion() function to be misra compliant
        • HAL ETH update
          • Remove duplicated IS_ETH_DUPLEX_MODE() and IS_ETH_RX_MODE() macros
          • Remove illegal space ETH_MAC_READCONTROLLER_FLUSHING macro
          • Update ETH_MAC_READCONTROLLER_XXX defined values (XXX can be IDLE, READING_DATA and READING_STATUS)
        • HAL FLASH update
          • update FLASH_OB_GetRDP() function to return uint8_t  instead of FlagStatus
          • update OB_RDP_LEVELx definition
          • add __HAL_FLASH_GET_LATENCY() macro
        • HAL HASH update
          • update HASH_DMAXferCplt() and HASHEx_DMAXferCplt() functions to properly configure the number of valid bits in last word of the message
          • update HAL_HASH_SHA1_Accumulate() function to check on the length of the input buffer
          • update HAL_HASH_MODE_Start_IT() functions (Mode stands for MD5, SHA1, SHA224 and SHA256 ) to :
            • Fix processing fail for small input buffers
            • to unlock the process and call return HAL_OK at the end of HASH processing to avoid incorrect repeating software
            • properly to manage the HashITCounter efficiency
            • Update to call the HAL_HASH_InCpltCallback() at the end of the complete buffer instead of every each 512 bits
          • update HASH_IT_DINI and HASH_IT_DCI definition
          • update __HAL_HASH_GET_FLAG() macro definition
        • HAL I2S update
          • update HAL_I2S_Transmit() function to ensure the waiting on Busy flag in case of slave mode selection
        • HAL RTC update
          • update HAL_RTCEx_SetWakeUpTimer() and HAL_RTCEx_SetWakeUpTimer_IT() functions to properly check on WUTWF flag
          • rename RTC_TIMESTAMPPIN_PI8 define to RTC_TIMESTAMPPIN_POS1
          • rename RTC_TIMESTAMPPIN_PC1 define to RTC_TIMESTAMPPIN_POS2
          • update __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG() macro definition
          • update __HAL_RTC_TAMPER_GET_IT() macro definition
          • update __HAL_RTC_TAMPER_CLEAR_FLAG() macro definition
          • update __HAL_RTC_TIMESTAMP_CLEAR_FLAG() macro definition
          • update __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() macro definition
          • add RTC_TAMPCR_TAMPXE and RTC_TAMPCR_TAMPXIE defines
        • HAL SMARTCARD update
          • add SMARTCARD_FLAG_IDLE, SMARTCARD_IT_IDLE and  SMARTCARD_CLEAR_IDLEF defines
        • HAL UART update
          • update HAL_UART_DMAResume() function to clear overrun flag before resuming the Rx transfer
          • update UART_FLAG_SBKF definition
        • HAL USART update
          • update HAL_USART_DMAResume() function to clear overrun flag before resuming the Rx transfer
        • LL FMC update
          • update NAND timing maximum values
        • LL USB update
          • USB_FlushTxFifo API: update to flush all Tx FIFO
          • Update to use local variable in USB Host channel re-activation

        V1.0.0 / 12-May-2015

        Main Changes

        • First official release for STM32F756xx/746xx/745xx devices

        License

        Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
        1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
        2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
        3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived
               from this software without specific prior written permission.

        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

        For complete documentation on STM32 Microcontrollers visit www.st.com/STM32