You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1321 lines
52 KiB
1321 lines
52 KiB
/** |
|
****************************************************************************** |
|
* @file stm32f7xx_ll_fmc.h |
|
* @author MCD Application Team |
|
* @brief Header file of FMC HAL module. |
|
****************************************************************************** |
|
* @attention |
|
* |
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics. |
|
* All rights reserved.</center></h2> |
|
* |
|
* This software component is licensed by ST under BSD 3-Clause license, |
|
* the "License"; You may not use this file except in compliance with the |
|
* License. You may obtain a copy of the License at: |
|
* opensource.org/licenses/BSD-3-Clause |
|
* |
|
****************************************************************************** |
|
*/ |
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/ |
|
#ifndef __STM32F7xx_LL_FMC_H |
|
#define __STM32F7xx_LL_FMC_H |
|
|
|
#ifdef __cplusplus |
|
extern "C" { |
|
#endif |
|
|
|
/* Includes ------------------------------------------------------------------*/ |
|
#include "stm32f7xx_hal_def.h" |
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver |
|
* @{ |
|
*/ |
|
|
|
/** @addtogroup FMC_LL |
|
* @{ |
|
*/ |
|
|
|
/** @addtogroup FMC_LL_Private_Macros |
|
* @{ |
|
*/ |
|
#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \ |
|
((BANK) == FMC_NORSRAM_BANK2) || \ |
|
((BANK) == FMC_NORSRAM_BANK3) || \ |
|
((BANK) == FMC_NORSRAM_BANK4)) |
|
|
|
#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \ |
|
((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE)) |
|
|
|
#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \ |
|
((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \ |
|
((__MEMORY__) == FMC_MEMORY_TYPE_NOR)) |
|
|
|
#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \ |
|
((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \ |
|
((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32)) |
|
|
|
#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \ |
|
((__MODE__) == FMC_ACCESS_MODE_B) || \ |
|
((__MODE__) == FMC_ACCESS_MODE_C) || \ |
|
((__MODE__) == FMC_ACCESS_MODE_D)) |
|
|
|
#define IS_FMC_NAND_BANK(BANK) ((BANK) == FMC_NAND_BANK3) |
|
|
|
#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_WAIT_FEATURE_DISABLE) || \ |
|
((FEATURE) == FMC_NAND_WAIT_FEATURE_ENABLE)) |
|
|
|
#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_MEM_BUS_WIDTH_8) || \ |
|
((WIDTH) == FMC_NAND_MEM_BUS_WIDTH_16)) |
|
|
|
#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \ |
|
((STATE) == FMC_NAND_ECC_ENABLE)) |
|
|
|
#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ |
|
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ |
|
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ |
|
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ |
|
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ |
|
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE)) |
|
|
|
#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \ |
|
((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \ |
|
((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32)) |
|
|
|
#define IS_FMC_WRITE_PROTECTION(__WRITE__) (((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \ |
|
((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_ENABLE)) |
|
|
|
#define IS_FMC_SDCLOCK_PERIOD(__PERIOD__) (((__PERIOD__) == FMC_SDRAM_CLOCK_DISABLE) || \ |
|
((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_2) || \ |
|
((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_3)) |
|
|
|
#define IS_FMC_READ_BURST(__RBURST__) (((__RBURST__) == FMC_SDRAM_RBURST_DISABLE) || \ |
|
((__RBURST__) == FMC_SDRAM_RBURST_ENABLE)) |
|
|
|
#define IS_FMC_READPIPE_DELAY(__DELAY__) (((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_0) || \ |
|
((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_1) || \ |
|
((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_2)) |
|
|
|
#define IS_FMC_COMMAND_MODE(__COMMAND__) (((__COMMAND__) == FMC_SDRAM_CMD_NORMAL_MODE) || \ |
|
((__COMMAND__) == FMC_SDRAM_CMD_CLK_ENABLE) || \ |
|
((__COMMAND__) == FMC_SDRAM_CMD_PALL) || \ |
|
((__COMMAND__) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \ |
|
((__COMMAND__) == FMC_SDRAM_CMD_LOAD_MODE) || \ |
|
((__COMMAND__) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \ |
|
((__COMMAND__) == FMC_SDRAM_CMD_POWERDOWN_MODE)) |
|
|
|
#define IS_FMC_COMMAND_TARGET(__TARGET__) (((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1) || \ |
|
((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK2) || \ |
|
((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1_2)) |
|
|
|
/** @defgroup FMC_TCLR_Setup_Time FMC TCLR Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_TAR_Setup_Time FMC TAR Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Setup_Time FMC Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 254) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Wait_Setup_Time FMC Wait Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 254) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Hold_Setup_Time FMC Hold Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 254) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_HiZ_Setup_Time FMC HiZ Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 254) |
|
/** |
|
* @} |
|
*/ |
|
|
|
#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \ |
|
((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE)) |
|
|
|
#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \ |
|
((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH)) |
|
|
|
#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \ |
|
((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS)) |
|
|
|
#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \ |
|
((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE)) |
|
|
|
#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \ |
|
((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE)) |
|
|
|
#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \ |
|
((__MODE__) == FMC_EXTENDED_MODE_ENABLE)) |
|
|
|
#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \ |
|
((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE)) |
|
|
|
/** @defgroup FMC_Data_Latency FMC Data Latency |
|
* @{ |
|
*/ |
|
#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \ |
|
((__BURST__) == FMC_WRITE_BURST_ENABLE)) |
|
|
|
#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ |
|
((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) |
|
|
|
|
|
/** @defgroup FMC_Address_Setup_Time FMC Address Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Address_Hold_Time FMC Address Hold Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Data_Setup_Time FMC Data Setup Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Bus_Turn_around_Duration FMC Bus Turn around Duration |
|
* @{ |
|
*/ |
|
#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_CLK_Division FMC CLK Division |
|
* @{ |
|
*/ |
|
#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_LoadToActive_Delay FMC SDRAM LoadToActive Delay |
|
* @{ |
|
*/ |
|
#define IS_FMC_LOADTOACTIVE_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_ExitSelfRefresh_Delay FMC SDRAM ExitSelfRefresh Delay |
|
* @{ |
|
*/ |
|
#define IS_FMC_EXITSELFREFRESH_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_SelfRefresh_Time FMC SDRAM SelfRefresh Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_SELFREFRESH_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_RowCycle_Delay FMC SDRAM RowCycle Delay |
|
* @{ |
|
*/ |
|
#define IS_FMC_ROWCYCLE_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Write_Recovery_Time FMC SDRAM Write Recovery Time |
|
* @{ |
|
*/ |
|
#define IS_FMC_WRITE_RECOVERY_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_RP_Delay FMC SDRAM RP Delay |
|
* @{ |
|
*/ |
|
#define IS_FMC_RP_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_RCD_Delay FMC SDRAM RCD Delay |
|
* @{ |
|
*/ |
|
#define IS_FMC_RCD_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_AutoRefresh_Number FMC SDRAM AutoRefresh Number |
|
* @{ |
|
*/ |
|
#define IS_FMC_AUTOREFRESH_NUMBER(__NUMBER__) (((__NUMBER__) > 0) && ((__NUMBER__) <= 16)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_ModeRegister_Definition FMC SDRAM ModeRegister Definition |
|
* @{ |
|
*/ |
|
#define IS_FMC_MODE_REGISTER(__CONTENT__) ((__CONTENT__) <= 8191) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Refresh_rate FMC SDRAM Refresh rate |
|
* @{ |
|
*/ |
|
#define IS_FMC_REFRESH_RATE(__RATE__) ((__RATE__) <= 8191) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_NORSRAM_Device_Instance FMC NORSRAM Device Instance |
|
* @{ |
|
*/ |
|
#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance FMC NORSRAM EXTENDED Device Instance |
|
* @{ |
|
*/ |
|
#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_NAND_Device_Instance FMC NAND Device Instance |
|
* @{ |
|
*/ |
|
#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Device_Instance FMC SDRAM Device Instance |
|
* @{ |
|
*/ |
|
#define IS_FMC_SDRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_SDRAM_DEVICE) |
|
/** |
|
* @} |
|
*/ |
|
|
|
#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \ |
|
((BANK) == FMC_SDRAM_BANK2)) |
|
|
|
#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \ |
|
((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \ |
|
((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \ |
|
((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11)) |
|
|
|
#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \ |
|
((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \ |
|
((ROW) == FMC_SDRAM_ROW_BITS_NUM_13)) |
|
|
|
#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \ |
|
((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4)) |
|
|
|
|
|
#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \ |
|
((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \ |
|
((LATENCY) == FMC_SDRAM_CAS_LATENCY_3)) |
|
|
|
#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \ |
|
((__SIZE__) == FMC_PAGE_SIZE_128) || \ |
|
((__SIZE__) == FMC_PAGE_SIZE_256) || \ |
|
((__SIZE__) == FMC_PAGE_SIZE_512) || \ |
|
((__SIZE__) == FMC_PAGE_SIZE_1024)) |
|
|
|
#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \ |
|
((__FIFO__) == FMC_WRITE_FIFO_ENABLE)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Exported typedef ----------------------------------------------------------*/ |
|
/** @defgroup FMC_Exported_typedef FMC Low Layer Exported Types |
|
* @{ |
|
*/ |
|
#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef |
|
#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef |
|
#define FMC_NAND_TypeDef FMC_Bank3_TypeDef |
|
#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef |
|
|
|
#define FMC_NORSRAM_DEVICE FMC_Bank1 |
|
#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E |
|
#define FMC_NAND_DEVICE FMC_Bank3 |
|
#define FMC_SDRAM_DEVICE FMC_Bank5_6 |
|
|
|
/** |
|
* @brief FMC NORSRAM Configuration Structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. |
|
This parameter can be a value of @ref FMC_NORSRAM_Bank */ |
|
|
|
uint32_t DataAddressMux; /*!< Specifies whether the address and data values are |
|
multiplexed on the data bus or not. |
|
This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ |
|
|
|
uint32_t MemoryType; /*!< Specifies the type of external memory attached to |
|
the corresponding memory device. |
|
This parameter can be a value of @ref FMC_Memory_Type */ |
|
|
|
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. |
|
This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ |
|
|
|
uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, |
|
valid only with synchronous burst Flash memories. |
|
This parameter can be a value of @ref FMC_Burst_Access_Mode */ |
|
|
|
uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing |
|
the Flash memory in burst mode. |
|
This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ |
|
|
|
uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one |
|
clock cycle before the wait state or during the wait state, |
|
valid only when accessing memories in burst mode. |
|
This parameter can be a value of @ref FMC_Wait_Timing */ |
|
|
|
uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC. |
|
This parameter can be a value of @ref FMC_Write_Operation */ |
|
|
|
uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait |
|
signal, valid for Flash memory access in burst mode. |
|
This parameter can be a value of @ref FMC_Wait_Signal */ |
|
|
|
uint32_t ExtendedMode; /*!< Enables or disables the extended mode. |
|
This parameter can be a value of @ref FMC_Extended_Mode */ |
|
|
|
uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, |
|
valid only with asynchronous Flash memories. |
|
This parameter can be a value of @ref FMC_AsynchronousWait */ |
|
|
|
uint32_t WriteBurst; /*!< Enables or disables the write burst operation. |
|
This parameter can be a value of @ref FMC_Write_Burst */ |
|
|
|
uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices. |
|
This parameter is only enabled through the FMC_BCR1 register, and don't care |
|
through FMC_BCR2..4 registers. |
|
This parameter can be a value of @ref FMC_Continous_Clock */ |
|
|
|
uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller. |
|
This parameter is only enabled through the FMC_BCR1 register, and don't care |
|
through FMC_BCR2..4 registers. |
|
This parameter can be a value of @ref FMC_Write_FIFO */ |
|
|
|
uint32_t PageSize; /*!< Specifies the memory page size. |
|
This parameter can be a value of @ref FMC_Page_Size */ |
|
|
|
}FMC_NORSRAM_InitTypeDef; |
|
|
|
/** |
|
* @brief FMC NORSRAM Timing parameters structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure |
|
the duration of the address setup time. |
|
This parameter can be a value between Min_Data = 0 and Max_Data = 15. |
|
@note This parameter is not used with synchronous NOR Flash memories. */ |
|
|
|
uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure |
|
the duration of the address hold time. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 15. |
|
@note This parameter is not used with synchronous NOR Flash memories. */ |
|
|
|
uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure |
|
the duration of the data setup time. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 255. |
|
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed |
|
NOR Flash memories. */ |
|
|
|
uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure |
|
the duration of the bus turnaround. |
|
This parameter can be a value between Min_Data = 0 and Max_Data = 15. |
|
@note This parameter is only used for multiplexed NOR Flash memories. */ |
|
|
|
uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of |
|
HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16. |
|
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM |
|
accesses. */ |
|
|
|
uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue |
|
to the memory before getting the first data. |
|
The parameter value depends on the memory type as shown below: |
|
- It must be set to 0 in case of a CRAM |
|
- It is don't care in asynchronous NOR, SRAM or ROM accesses |
|
- It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories |
|
with synchronous burst mode enable */ |
|
|
|
uint32_t AccessMode; /*!< Specifies the asynchronous access mode. |
|
This parameter can be a value of @ref FMC_Access_Mode */ |
|
}FMC_NORSRAM_TimingTypeDef; |
|
|
|
/** |
|
* @brief FMC NAND Configuration Structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. |
|
This parameter can be a value of @ref FMC_NAND_Bank */ |
|
|
|
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. |
|
This parameter can be any value of @ref FMC_Wait_feature */ |
|
|
|
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. |
|
This parameter can be any value of @ref FMC_NAND_Data_Width */ |
|
|
|
uint32_t EccComputation; /*!< Enables or disables the ECC computation. |
|
This parameter can be any value of @ref FMC_ECC */ |
|
|
|
uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. |
|
This parameter can be any value of @ref FMC_ECC_Page_Size */ |
|
|
|
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the |
|
delay between CLE low and RE low. |
|
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ |
|
|
|
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the |
|
delay between ALE low and RE low. |
|
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ |
|
}FMC_NAND_InitTypeDef; |
|
|
|
/** |
|
* @brief FMC NAND Timing parameters structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before |
|
the command assertion for NAND-Flash read or write access |
|
to common/Attribute or I/O memory space (depending on |
|
the memory space timing to be configured). |
|
This parameter can be a value between Min_Data = 0 and Max_Data = 254 */ |
|
|
|
uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the |
|
command for NAND-Flash read or write access to |
|
common/Attribute or I/O memory space (depending on the |
|
memory space timing to be configured). |
|
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ |
|
|
|
uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address |
|
(and data for write access) after the command de-assertion |
|
for NAND-Flash read or write access to common/Attribute |
|
or I/O memory space (depending on the memory space timing |
|
to be configured). |
|
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ |
|
|
|
uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the |
|
data bus is kept in HiZ after the start of a NAND-Flash |
|
write access to common/Attribute or I/O memory space (depending |
|
on the memory space timing to be configured). |
|
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */ |
|
}FMC_NAND_PCC_TimingTypeDef; |
|
|
|
/** |
|
* @brief FMC SDRAM Configuration Structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used. |
|
This parameter can be a value of @ref FMC_SDRAM_Bank */ |
|
|
|
uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address. |
|
This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */ |
|
|
|
uint32_t RowBitsNumber; /*!< Defines the number of bits of column address. |
|
This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */ |
|
|
|
uint32_t MemoryDataWidth; /*!< Defines the memory device width. |
|
This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */ |
|
|
|
uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks. |
|
This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */ |
|
|
|
uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. |
|
This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */ |
|
|
|
uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode. |
|
This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */ |
|
|
|
uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow |
|
to disable the clock before changing frequency. |
|
This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */ |
|
|
|
uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read |
|
commands during the CAS latency and stores data in the Read FIFO. |
|
This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */ |
|
|
|
uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. |
|
This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */ |
|
}FMC_SDRAM_InitTypeDef; |
|
|
|
/** |
|
* @brief FMC SDRAM Timing parameters structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and |
|
an active or Refresh command in number of memory clock cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
|
|
uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to |
|
issuing the Activate command in number of memory clock cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
|
|
uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock |
|
cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
|
|
uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command |
|
and the delay between two consecutive Refresh commands in number of |
|
memory clock cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
|
|
uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
|
|
uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command |
|
in number of memory clock cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
|
|
uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write |
|
command in number of memory clock cycles. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
}FMC_SDRAM_TimingTypeDef; |
|
|
|
/** |
|
* @brief SDRAM command parameters structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device. |
|
This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */ |
|
|
|
uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to. |
|
This parameter can be a value of @ref FMC_SDRAM_Command_Target. */ |
|
|
|
uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued |
|
in auto refresh mode. |
|
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ |
|
uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ |
|
}FMC_SDRAM_CommandTypeDef; |
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Exported constants --------------------------------------------------------*/ |
|
/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank |
|
* @{ |
|
*/ |
|
#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000U) |
|
#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002U) |
|
#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004U) |
|
#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing |
|
* @{ |
|
*/ |
|
#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Memory_Type FMC Memory Type |
|
* @{ |
|
*/ |
|
#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000U) |
|
#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004U) |
|
#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width |
|
* @{ |
|
*/ |
|
#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U) |
|
#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U) |
|
#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access |
|
* @{ |
|
*/ |
|
#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040U) |
|
#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode |
|
* @{ |
|
*/ |
|
#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity |
|
* @{ |
|
*/ |
|
#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000U) |
|
#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Wait_Timing FMC Wait Timing |
|
* @{ |
|
*/ |
|
#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000U) |
|
#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Write_Operation FMC Write Operation |
|
* @{ |
|
*/ |
|
#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Wait_Signal FMC Wait Signal |
|
* @{ |
|
*/ |
|
#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Extended_Mode FMC Extended Mode |
|
* @{ |
|
*/ |
|
#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait |
|
* @{ |
|
*/ |
|
#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Page_Size FMC Page Size |
|
* @{ |
|
*/ |
|
#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000U) |
|
#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCR1_CPSIZE_0) |
|
#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCR1_CPSIZE_1) |
|
#define FMC_PAGE_SIZE_512 ((uint32_t)(FMC_BCR1_CPSIZE_0 | FMC_BCR1_CPSIZE_1)) |
|
#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCR1_CPSIZE_2) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Write_Burst FMC Write Burst |
|
* @{ |
|
*/ |
|
#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Continous_Clock FMC Continuous Clock |
|
* @{ |
|
*/ |
|
#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000U) |
|
#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Write_FIFO FMC Write FIFO |
|
* @{ |
|
*/ |
|
#define FMC_WRITE_FIFO_DISABLE ((uint32_t)FMC_BCR1_WFDIS) |
|
#define FMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Access_Mode FMC Access Mode |
|
* @{ |
|
*/ |
|
#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000U) |
|
#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000U) |
|
#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000U) |
|
#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller |
|
* @{ |
|
*/ |
|
/** @defgroup FMC_NAND_Bank FMC NAND Bank |
|
* @{ |
|
*/ |
|
#define FMC_NAND_BANK3 ((uint32_t)0x00000100U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Wait_feature FMC Wait feature |
|
* @{ |
|
*/ |
|
#define FMC_NAND_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_NAND_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type |
|
* @{ |
|
*/ |
|
#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width |
|
* @{ |
|
*/ |
|
#define FMC_NAND_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U) |
|
#define FMC_NAND_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_ECC FMC ECC |
|
* @{ |
|
*/ |
|
#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size |
|
* @{ |
|
*/ |
|
#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000U) |
|
#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000U) |
|
#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000U) |
|
#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000U) |
|
#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000U) |
|
#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller |
|
* @{ |
|
*/ |
|
/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001U) |
|
#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002U) |
|
#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004U) |
|
#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U) |
|
#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080U) |
|
#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100U) |
|
#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800U) |
|
#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000U) |
|
#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001U) |
|
#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002U) |
|
#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003U) |
|
#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004U) |
|
#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005U) |
|
#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2 |
|
#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1 |
|
#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status |
|
* @{ |
|
*/ |
|
#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000U) |
|
#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0 |
|
#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_Interrupt_definition FMC Low Layer Interrupt definition |
|
* @{ |
|
*/ |
|
#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008U) |
|
#define FMC_IT_LEVEL ((uint32_t)0x00000010U) |
|
#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020U) |
|
#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000U) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_Flag_definition FMC Low Layer Flag definition |
|
* @{ |
|
*/ |
|
#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001U) |
|
#define FMC_FLAG_LEVEL ((uint32_t)0x00000002U) |
|
#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004U) |
|
#define FMC_FLAG_FEMPT ((uint32_t)0x00000040U) |
|
#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE |
|
#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY |
|
#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE |
|
/** |
|
* @} |
|
*/ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Private macro -------------------------------------------------------------*/ |
|
/** @defgroup FMC_LL_Private_Macros FMC_LL Private Macros |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros |
|
* @brief macros to handle NOR device enable/disable and read/write operations |
|
* @{ |
|
*/ |
|
|
|
/** |
|
* @brief Enable the NORSRAM device access. |
|
* @param __INSTANCE__ FMC_NORSRAM Instance |
|
* @param __BANK__ FMC_NORSRAM Bank |
|
* @retval None |
|
*/ |
|
#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN) |
|
|
|
/** |
|
* @brief Disable the NORSRAM device access. |
|
* @param __INSTANCE__ FMC_NORSRAM Instance |
|
* @param __BANK__ FMC_NORSRAM Bank |
|
* @retval None |
|
*/ |
|
#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN) |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros |
|
* @brief macros to handle NAND device enable/disable |
|
* @{ |
|
*/ |
|
|
|
/** |
|
* @brief Enable the NAND device access. |
|
* @param __INSTANCE__ FMC_NAND Instance |
|
* @retval None |
|
*/ |
|
#define __FMC_NAND_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN) |
|
|
|
/** |
|
* @brief Disable the NAND device access. |
|
* @param __INSTANCE__ FMC_NAND Instance |
|
* @retval None |
|
*/ |
|
#define __FMC_NAND_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN) |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_Interrupt FMC Interrupt |
|
* @brief macros to handle FMC interrupts |
|
* @{ |
|
*/ |
|
|
|
/** |
|
* @brief Enable the NAND device interrupt. |
|
* @param __INSTANCE__ FMC_NAND instance |
|
* @param __INTERRUPT__ FMC_NAND interrupt |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_IT_RISING_EDGE: Interrupt rising edge. |
|
* @arg FMC_IT_LEVEL: Interrupt level. |
|
* @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. |
|
* @retval None |
|
*/ |
|
#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__)) |
|
|
|
/** |
|
* @brief Disable the NAND device interrupt. |
|
* @param __INSTANCE__ FMC_NAND Instance |
|
* @param __INTERRUPT__ FMC_NAND interrupt |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_IT_RISING_EDGE: Interrupt rising edge. |
|
* @arg FMC_IT_LEVEL: Interrupt level. |
|
* @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. |
|
* @retval None |
|
*/ |
|
#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__)) |
|
|
|
/** |
|
* @brief Get flag status of the NAND device. |
|
* @param __INSTANCE__ FMC_NAND Instance |
|
* @param __BANK__ FMC_NAND Bank |
|
* @param __FLAG__ FMC_NAND flag |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. |
|
* @arg FMC_FLAG_LEVEL: Interrupt level edge flag. |
|
* @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. |
|
* @arg FMC_FLAG_FEMPT: FIFO empty flag. |
|
* @retval The state of FLAG (SET or RESET). |
|
*/ |
|
#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__)) |
|
|
|
/** |
|
* @brief Clear flag status of the NAND device. |
|
* @param __INSTANCE__ FMC_NAND Instance |
|
* @param __FLAG__ FMC_NAND flag |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. |
|
* @arg FMC_FLAG_LEVEL: Interrupt level edge flag. |
|
* @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. |
|
* @arg FMC_FLAG_FEMPT: FIFO empty flag. |
|
* @retval None |
|
*/ |
|
#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__)) |
|
|
|
/** |
|
* @brief Enable the SDRAM device interrupt. |
|
* @param __INSTANCE__ FMC_SDRAM instance |
|
* @param __INTERRUPT__ FMC_SDRAM interrupt |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error |
|
* @retval None |
|
*/ |
|
#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__)) |
|
|
|
/** |
|
* @brief Disable the SDRAM device interrupt. |
|
* @param __INSTANCE__ FMC_SDRAM instance |
|
* @param __INTERRUPT__ FMC_SDRAM interrupt |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error |
|
* @retval None |
|
*/ |
|
#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__)) |
|
|
|
/** |
|
* @brief Get flag status of the SDRAM device. |
|
* @param __INSTANCE__ FMC_SDRAM instance |
|
* @param __FLAG__ FMC_SDRAM flag |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error. |
|
* @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag. |
|
* @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag. |
|
* @retval The state of FLAG (SET or RESET). |
|
*/ |
|
#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__)) |
|
|
|
/** |
|
* @brief Clear flag status of the SDRAM device. |
|
* @param __INSTANCE__ FMC_SDRAM instance |
|
* @param __FLAG__ FMC_SDRAM flag |
|
* This parameter can be any combination of the following values: |
|
* @arg FMC_SDRAM_FLAG_REFRESH_ERROR |
|
* @retval None |
|
*/ |
|
#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Private functions ---------------------------------------------------------*/ |
|
/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NORSRAM NOR SRAM |
|
* @{ |
|
*/ |
|
/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions |
|
* @{ |
|
*/ |
|
HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init); |
|
HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode); |
|
HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions |
|
* @{ |
|
*/ |
|
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); |
|
/** |
|
* @} |
|
*/ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NAND NAND |
|
* @{ |
|
*/ |
|
/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions |
|
* @{ |
|
*/ |
|
HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init); |
|
HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank); |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions |
|
* @{ |
|
*/ |
|
HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout); |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_SDRAM SDRAM |
|
* @{ |
|
*/ |
|
/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions |
|
* @{ |
|
*/ |
|
HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init); |
|
HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank); |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions |
|
* @{ |
|
*/ |
|
HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); |
|
HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout); |
|
HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate); |
|
HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber); |
|
uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank); |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
#ifdef __cplusplus |
|
} |
|
#endif |
|
|
|
#endif /* __STM32F7xx_LL_FMC_H */ |
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|