You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
339 lines
12 KiB
339 lines
12 KiB
/** |
|
****************************************************************************** |
|
* @file stm32746g_discovery.h |
|
* @author MCD Application Team |
|
* @brief This file contains definitions for STM32746G_DISCOVERY's LEDs, |
|
* push-buttons and COM ports hardware resources. |
|
****************************************************************************** |
|
* @attention |
|
* |
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
|
* |
|
* Redistribution and use in source and binary forms, with or without modification, |
|
* are permitted provided that the following conditions are met: |
|
* 1. Redistributions of source code must retain the above copyright notice, |
|
* this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright notice, |
|
* this list of conditions and the following disclaimer in the documentation |
|
* and/or other materials provided with the distribution. |
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors |
|
* may be used to endorse or promote products derived from this software |
|
* without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
****************************************************************************** |
|
*/ |
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/ |
|
#ifndef __STM32746G_DISCOVERY_H |
|
#define __STM32746G_DISCOVERY_H |
|
|
|
#ifdef __cplusplus |
|
extern "C" { |
|
#endif |
|
|
|
/* Includes ------------------------------------------------------------------*/ |
|
#include "stm32f7xx_hal.h" |
|
|
|
/** @addtogroup BSP |
|
* @{ |
|
*/ |
|
|
|
/** @addtogroup STM32746G_DISCOVERY |
|
* @{ |
|
*/ |
|
|
|
/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Types STM32746G_DISCOVERY_LOW_LEVEL Exported Types |
|
* @{ |
|
*/ |
|
typedef enum |
|
{ |
|
LED1 = 0, |
|
LED_GREEN = LED1, |
|
}Led_TypeDef; |
|
|
|
typedef enum |
|
{ |
|
BUTTON_WAKEUP = 0, |
|
BUTTON_TAMPER = 1, |
|
BUTTON_KEY = 2 |
|
}Button_TypeDef; |
|
|
|
typedef enum |
|
{ |
|
BUTTON_MODE_GPIO = 0, |
|
BUTTON_MODE_EXTI = 1 |
|
}ButtonMode_TypeDef; |
|
|
|
typedef enum |
|
{ |
|
COM1 = 0, |
|
COM2 = 1 |
|
}COM_TypeDef; |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Constants STM32746G_DISCOVERY_LOW_LEVEL Exported Constants |
|
* @{ |
|
*/ |
|
|
|
/** |
|
* @brief Define for STM32746G_DISCOVERY board |
|
*/ |
|
#if !defined (USE_STM32746G_DISCO) |
|
#define USE_STM32746G_DISCO |
|
#endif |
|
|
|
/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_LED |
|
* @{ |
|
*/ |
|
|
|
#define LEDn ((uint8_t)1) |
|
|
|
#define LED1_GPIO_PORT GPIOI |
|
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE() |
|
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE() |
|
#define LED1_PIN GPIO_PIN_1 |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_BUTTON |
|
* @{ |
|
*/ |
|
#define BUTTONn ((uint8_t)3) |
|
|
|
/** |
|
* @brief Wakeup push-button |
|
*/ |
|
#define WAKEUP_BUTTON_PIN GPIO_PIN_11 |
|
#define WAKEUP_BUTTON_GPIO_PORT GPIOI |
|
#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE() |
|
#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE() |
|
#define WAKEUP_BUTTON_EXTI_IRQn EXTI15_10_IRQn |
|
|
|
/** |
|
* @brief Tamper push-button |
|
*/ |
|
#define TAMPER_BUTTON_PIN GPIO_PIN_11 |
|
#define TAMPER_BUTTON_GPIO_PORT GPIOI |
|
#define TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE() |
|
#define TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE() |
|
#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn |
|
|
|
/** |
|
* @brief Key push-button |
|
*/ |
|
#define KEY_BUTTON_PIN GPIO_PIN_11 |
|
#define KEY_BUTTON_GPIO_PORT GPIOI |
|
#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE() |
|
#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE() |
|
#define KEY_BUTTON_EXTI_IRQn EXTI15_10_IRQn |
|
|
|
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) WAKEUP_BUTTON_GPIO_CLK_ENABLE(); else\ |
|
if((__INDEX__) == 1) TAMPER_BUTTON_GPIO_CLK_ENABLE(); else\ |
|
KEY_BUTTON_GPIO_CLK_ENABLE(); } while(0) |
|
|
|
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? WAKEUP_BUTTON_GPIO_CLK_DISABLE() :\ |
|
((__INDEX__) == 1) ? TAMPER_BUTTON_GPIO_CLK_DISABLE() : KEY_BUTTON_GPIO_CLK_DISABLE()) |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_SIGNAL |
|
* @{ |
|
*/ |
|
#define SIGNALn ((uint8_t)1) |
|
|
|
/** |
|
* @brief SD-detect signal |
|
*/ |
|
#define SD_DETECT_PIN GPIO_PIN_13 |
|
#define SD_DETECT_GPIO_PORT GPIOC |
|
#define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
|
#define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
|
#define SD_DETECT_EXTI_IRQn EXTI15_10_IRQn |
|
|
|
/** |
|
* @brief Touch screen interrupt signal |
|
*/ |
|
#define TS_INT_PIN GPIO_PIN_13 |
|
#define TS_INT_GPIO_PORT GPIOI |
|
#define TS_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE() |
|
#define TS_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE() |
|
#define TS_INT_EXTI_IRQn EXTI15_10_IRQn |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_COM |
|
* @{ |
|
*/ |
|
#define COMn ((uint8_t)1) |
|
|
|
/** |
|
* @brief Definition for COM port1, connected to USART1 |
|
*/ |
|
#define DISCOVERY_COM1 USART1 |
|
#define DISCOVERY_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE() |
|
#define DISCOVERY_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE() |
|
|
|
#define DISCOVERY_COM1_TX_PIN GPIO_PIN_9 |
|
#define DISCOVERY_COM1_TX_GPIO_PORT GPIOA |
|
#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
|
#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
|
#define DISCOVERY_COM1_TX_AF GPIO_AF7_USART1 |
|
|
|
#define DISCOVERY_COM1_RX_PIN GPIO_PIN_7 |
|
#define DISCOVERY_COM1_RX_GPIO_PORT GPIOB |
|
#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
|
#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
|
#define DISCOVERY_COM1_RX_AF GPIO_AF7_USART1 |
|
|
|
#define DISCOVERY_COM1_IRQn USART1_IRQn |
|
|
|
#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) DISCOVERY_COM1_CLK_ENABLE(); } while(0) |
|
#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0) |
|
|
|
#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) DISCOVERY_COM1_TX_GPIO_CLK_ENABLE(); } while(0) |
|
#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0) |
|
|
|
#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) DISCOVERY_COM1_RX_GPIO_CLK_ENABLE(); } while(0) |
|
#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0) |
|
|
|
/* Exported constant IO ------------------------------------------------------*/ |
|
|
|
#define LCD_I2C_ADDRESS ((uint16_t)0x70) |
|
#define CAMERA_I2C_ADDRESS ((uint16_t)0x60) |
|
#define AUDIO_I2C_ADDRESS ((uint16_t)0x34) |
|
#define EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0) |
|
#define EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6) |
|
#define TS_I2C_ADDRESS ((uint16_t)0x70) |
|
|
|
/* I2C clock speed configuration (in Hz) |
|
WARNING: |
|
Make sure that this define is not already declared in other files (ie. |
|
stm32746g_discovery.h file). It can be used in parallel by other modules. */ |
|
#ifndef I2C_SPEED |
|
#define I2C_SPEED ((uint32_t)100000) |
|
#endif /* I2C_SPEED */ |
|
|
|
/* User can use this section to tailor I2Cx/I2Cx instance used and associated |
|
resources */ |
|
/* Definition for AUDIO and LCD I2Cx resources */ |
|
#define DISCOVERY_AUDIO_I2Cx I2C3 |
|
#define DISCOVERY_AUDIO_I2Cx_CLK_ENABLE() __HAL_RCC_I2C3_CLK_ENABLE() |
|
#define DISCOVERY_AUDIO_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
|
#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE() |
|
|
|
#define DISCOVERY_AUDIO_I2Cx_FORCE_RESET() __HAL_RCC_I2C3_FORCE_RESET() |
|
#define DISCOVERY_AUDIO_I2Cx_RELEASE_RESET() __HAL_RCC_I2C3_RELEASE_RESET() |
|
|
|
/* Definition for I2Cx Pins */ |
|
#define DISCOVERY_AUDIO_I2Cx_SCL_PIN GPIO_PIN_7 |
|
#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT GPIOH |
|
#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_AF GPIO_AF4_I2C3 |
|
#define DISCOVERY_AUDIO_I2Cx_SDA_PIN GPIO_PIN_8 |
|
|
|
/* I2C interrupt requests */ |
|
#define DISCOVERY_AUDIO_I2Cx_EV_IRQn I2C3_EV_IRQn |
|
#define DISCOVERY_AUDIO_I2Cx_ER_IRQn I2C3_ER_IRQn |
|
|
|
/* Definition for external, camera and Arduino connector I2Cx resources */ |
|
#define DISCOVERY_EXT_I2Cx I2C1 |
|
#define DISCOVERY_EXT_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() |
|
#define DISCOVERY_EXT_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
|
#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
|
|
|
#define DISCOVERY_EXT_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() |
|
#define DISCOVERY_EXT_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() |
|
|
|
/* Definition for I2Cx Pins */ |
|
#define DISCOVERY_EXT_I2Cx_SCL_PIN GPIO_PIN_8 |
|
#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT GPIOB |
|
#define DISCOVERY_EXT_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1 |
|
#define DISCOVERY_EXT_I2Cx_SDA_PIN GPIO_PIN_9 |
|
|
|
/* I2C interrupt requests */ |
|
#define DISCOVERY_EXT_I2Cx_EV_IRQn I2C1_EV_IRQn |
|
#define DISCOVERY_EXT_I2Cx_ER_IRQn I2C1_ER_IRQn |
|
|
|
/* I2C TIMING Register define when I2C clock source is SYSCLK */ |
|
/* I2C TIMING is calculated from APB1 source clock = 50 MHz */ |
|
/* Due to the big MOFSET capacity for adapting the camera level the rising time is very large (>1us) */ |
|
/* 0x40912732 takes in account the big rising and aims a clock of 100khz */ |
|
#ifndef DISCOVERY_I2Cx_TIMING |
|
#define DISCOVERY_I2Cx_TIMING ((uint32_t)0x40912732) |
|
#endif /* DISCOVERY_I2Cx_TIMING */ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Macros STM32746G_DISCOVERY_LOW_LEVEL Exported Macros |
|
* @{ |
|
*/ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @addtogroup STM32746G_DISCOVERY_LOW_LEVEL_Exported_Functions |
|
* @{ |
|
*/ |
|
uint32_t BSP_GetVersion(void); |
|
void BSP_LED_Init(Led_TypeDef Led); |
|
void BSP_LED_DeInit(Led_TypeDef Led); |
|
void BSP_LED_On(Led_TypeDef Led); |
|
void BSP_LED_Off(Led_TypeDef Led); |
|
void BSP_LED_Toggle(Led_TypeDef Led); |
|
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode); |
|
void BSP_PB_DeInit(Button_TypeDef Button); |
|
uint32_t BSP_PB_GetState(Button_TypeDef Button); |
|
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart); |
|
void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart); |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
#ifdef __cplusplus |
|
} |
|
#endif |
|
|
|
#endif /* __STM32746G_DISCOVERY_H */ |
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|