You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

263 lines
9.1 KiB

/**
******************************************************************************
* @file stm32l496g_discovery_lcd.h
* @author MCD Application Team
* @brief This file contains the common defines and functions prototypes for
* the stm32l496g_discovery_lcd.c driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L496G_DISCOVERY_LCD_H
#define __STM32L496G_DISCOVERY_LCD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l496g_discovery.h"
#include "stm32l496g_discovery_io.h"
/*#include "../Components/ls016b8uy/ls016b8uy.h"*/
#include "../Components/st7789h2/st7789h2.h"
#include "../../../Utilities/Fonts/fonts.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32L496G_DISCOVERY
* @{
*/
/** @defgroup STM32L496G_DISCOVERY_LCD STM32L496G-DISCOVERY LCD
* @{
*/
/** @defgroup STM32L496G_DISCOVERY_LCD_Exported_Types STM32L496G DISCOVERY LCD Exported Types
* @{
*/
typedef struct
{
uint32_t TextColor;
uint32_t BackColor;
sFONT *pFont;
} LCD_DrawPropTypeDef;
/**
* @}
*/
/** @defgroup STM32L496G_DISCOVERY_LCD_Exported_Constants STM32L496G DISCOVERY LCD Exported Constants
* @{
*/
/**
* @brief LCD status structure definition
*/
#define LCD_OK ((uint8_t)0x00)
#define LCD_ERROR ((uint8_t)0x01)
#define LCD_TIMEOUT ((uint8_t)0x02)
typedef struct
{
int16_t X;
int16_t Y;
} Point, * pPoint;
/**
* @brief Line mode structures definition
*/
typedef enum
{
CENTER_MODE = 0x01, /* Center mode */
RIGHT_MODE = 0x02, /* Right mode */
LEFT_MODE = 0x03 /* Left mode */
} Line_ModeTypdef;
#define LCD_ORIENTATION_PORTRAIT ((uint8_t)0x00) /*!< Portrait orientation choice of LCD screen */
#define LCD_ORIENTATION_LANDSCAPE ((uint8_t)0x01) /*!< Landscape orientation choice of LCD screen */
#define LCD_ORIENTATION_UNDEFINED ((uint8_t)0x02) /*!< Undefined LCD screen orientation */
/**
* @brief LCD color
*/
#define LCD_COLOR_BLUE ((uint16_t)0x001F)
#define LCD_COLOR_GREEN ((uint16_t)0x07E0)
#define LCD_COLOR_RED ((uint16_t)0xF800)
#define LCD_COLOR_CYAN ((uint16_t)0x07FF)
#define LCD_COLOR_MAGENTA ((uint16_t)0xF81F)
#define LCD_COLOR_YELLOW ((uint16_t)0xFFE0)
#define LCD_COLOR_LIGHTBLUE ((uint16_t)0x841F)
#define LCD_COLOR_LIGHTGREEN ((uint16_t)0x87F0)
#define LCD_COLOR_LIGHTRED ((uint16_t)0xFC10)
#define LCD_COLOR_LIGHTMAGENTA ((uint16_t)0xFC1F)
#define LCD_COLOR_LIGHTYELLOW ((uint16_t)0xFFF0)
#define LCD_COLOR_DARKBLUE ((uint16_t)0x0010)
#define LCD_COLOR_DARKGREEN ((uint16_t)0x0400)
#define LCD_COLOR_DARKRED ((uint16_t)0x8000)
#define LCD_COLOR_DARKCYAN ((uint16_t)0x0410)
#define LCD_COLOR_DARKMAGENTA ((uint16_t)0x8010)
#define LCD_COLOR_DARKYELLOW ((uint16_t)0x8400)
#define LCD_COLOR_WHITE ((uint16_t)0xFFFF)
#define LCD_COLOR_LIGHTGRAY ((uint16_t)0xD69A)
#define LCD_COLOR_GRAY ((uint16_t)0x8410)
#define LCD_COLOR_DARKGRAY ((uint16_t)0x4208)
#define LCD_COLOR_BLACK ((uint16_t)0x0000)
#define LCD_COLOR_BROWN ((uint16_t)0xA145)
#define LCD_COLOR_ORANGE ((uint16_t)0xFD20)
/**
* @brief LCD default font
*/
#define LCD_DEFAULT_FONT Font12
/**
* @brief LCD special pins
*/
/* LCD reset pin */
/* LCD reset is accessed thru the MFX */
#define LCD_RST_PIN IO1_PIN_2
/* LCD tearing effect pin */
#define LCD_TE_PIN GPIO_PIN_7
#define LCD_TE_GPIO_PORT GPIOH
#define LCD_TE_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
#define LCD_TE_GPIO_CLK_DISABLE() __HAL_RCC_GPIOH_CLK_DISABLE()
/* Backlight control pin */
#if defined(LPTIMER_DIMMING)
#define LCD_BL_CTRL_PIN GPIO_PIN_15
#define LCD_BL_CTRL_GPIO_PORT GPIOG
#define LCD_BL_CTRL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
#define LCD_BL_CTRL_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
#else
#define LCD_BL_CTRL_PIN GPIO_PIN_0
#define LCD_BL_CTRL_GPIO_PORT GPIOI
#define LCD_BL_CTRL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
#define LCD_BL_CTRL_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
#endif
/* Power on control pin */
#define LCD_PWR_CTRL_PIN GPIO_PIN_0
#define LCD_PWR_CTRL_GPIO_PORT GPIOH
#define LCD_PWR_CTRL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
#define LCD_PWR_CTRL_GPIO_CLK_DISABLE() __HAL_RCC_GPIOH_CLK_DISABLE()
/* Use by application to not use backlight */
extern FlagStatus WakeUpFromStandby;
extern FlagStatus WakeUpFromShutdown;
/* Screen dimming parameters */
/* Definition for TIMx clock resources */
#define TIMx TIM5
#define TIMx_CLK_ENABLE() __HAL_RCC_TIM5_CLK_ENABLE()
#define TIMx_CLK_DISABLE() __HAL_RCC_TIM5_CLK_DISABLE()
#define TIMx_CHANNEL TIM_CHANNEL_4
#define TIMx_CHANNEl_AF GPIO_AF2_TIM5
#if defined(LPTIMER_DIMMING)
#define PERIOD_VALUE (uint32_t)(99) /* Period Value */
#define PULSE_VALUE (uint32_t)(95) /* 5% cycle */
#define PULSE_DECREASE_START (uint32_t)(45) /* cycle start level when starting to dim the screen */
#define PULSE_DECREASE_DELAY (uint32_t)(40) /* gradually decrease cycle level every 40 milliseconds */
#else
#define PERIOD_VALUE (uint32_t)(666 - 1) /* Period Value */
#define PULSE_VALUE (uint32_t)((PERIOD_VALUE*5)/100) /* 5% cycle */
#define PULSE_DECREASE_START (uint32_t)(PULSE_VALUE + 120) /* cycle start level when starting to dim the screen */
#define PULSE_DECREASE_DELAY (uint32_t)(20) /* gradually decrease cycle level every 20 milliseconds */
#endif
/**
* @}
*/
/** @defgroup STM32L496G_DISCOVERY_LCD_Exported_Functions STM32L496G DISCOVERY LCD Exported Functions
* @{
*/
uint8_t BSP_LCD_Init(void);
uint8_t BSP_LCD_InitEx(uint32_t orientation);
void BSP_LCD_Reset(void);
uint8_t BSP_LCD_DeInit(void);
uint32_t BSP_LCD_GetXSize(void);
uint32_t BSP_LCD_GetYSize(void);
uint16_t BSP_LCD_GetTextColor(void);
uint16_t BSP_LCD_GetBackColor(void);
void BSP_LCD_SetTextColor(__IO uint16_t Color);
void BSP_LCD_SetBackColor(__IO uint16_t Color);
void BSP_LCD_SetFont(sFONT *fonts);
sFONT *BSP_LCD_GetFont(void);
void BSP_LCD_Clear(uint16_t Color);
void BSP_LCD_ClearStringLine(uint16_t Line);
void BSP_LCD_DisplayStringAtLine(uint16_t Line, uint8_t *ptr);
void BSP_LCD_DisplayStringAt(uint16_t Xpos, uint16_t Ypos, uint8_t *Text, Line_ModeTypdef Mode);
void BSP_LCD_DisplayChar(uint16_t Xpos, uint16_t Ypos, uint8_t Ascii);
uint16_t BSP_LCD_ReadPixel(uint16_t Xpos, uint16_t Ypos);
void BSP_LCD_DrawPixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGB_Code);
void BSP_LCD_DrawHLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length);
void BSP_LCD_DrawVLine(uint16_t Xpos, uint16_t Ypos, uint16_t Length);
void BSP_LCD_DrawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
void BSP_LCD_DrawRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
void BSP_LCD_DrawCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);
void BSP_LCD_DrawPolygon(pPoint Points, uint16_t PointCount);
void BSP_LCD_DrawEllipse(int Xpos, int Ypos, int XRadius, int YRadius);
void BSP_LCD_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pbmp);
void BSP_LCD_DrawRGBImage(uint16_t Xpos, uint16_t Ypos, uint16_t Xsize, uint16_t Ysize, uint8_t *pbmp);
void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
void BSP_LCD_FillCircle(uint16_t Xpos, uint16_t Ypos, uint16_t Radius);
void BSP_LCD_FillPolygon(pPoint Points, uint16_t PointCount);
void BSP_LCD_FillEllipse(int Xpos, int Ypos, int XRadius, int YRadius);
void BSP_LCD_DisplayOff(void);
void BSP_LCD_DisplayOn(void);
void BSP_LCD_ScreenDimmingOn(void);
void BSP_LCD_ScreenDimmingOff(void);
void BSP_LCD_ScreenDimmingConfig(const uint8_t start, const uint8_t stop, const uint8_t step, const uint8_t delay);
uint8_t BSP_LCD_GetOrientation(void);
/* These functions can be modified in case the current settings
need to be changed for specific application needs */
__weak void BSP_LCD_MspInit(void);
__weak void BSP_LCD_MspDeInit(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L496G_DISCOVERY_LCD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/