You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
237 lines
6.4 KiB
237 lines
6.4 KiB
2 years ago
|
/* USER CODE BEGIN Header */
|
||
|
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file usart.c
|
||
|
|
* @brief This file provides code for the configuration
|
||
|
|
* of the USART instances.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* Copyright (c) 2022 STMicroelectronics.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
||
|
|
* in the root directory of this software component.
|
||
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
/* USER CODE END Header */
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "usart.h"
|
||
|
|
|
||
|
|
/* USER CODE BEGIN 0 */
|
||
|
|
|
||
|
|
/* USER CODE END 0 */
|
||
|
|
|
||
|
|
UART_HandleTypeDef huart1;
|
||
|
|
UART_HandleTypeDef huart2;
|
||
|
|
|
||
|
|
/* USART1 init function */
|
||
|
|
|
||
|
|
void MX_USART1_UART_Init(void)
|
||
|
|
{
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART1_Init 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_Init 0 */
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART1_Init 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_Init 1 */
|
||
|
|
huart1.Instance = USART1;
|
||
|
|
huart1.Init.BaudRate = 115200;
|
||
|
|
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||
|
|
huart1.Init.StopBits = UART_STOPBITS_1;
|
||
|
|
huart1.Init.Parity = UART_PARITY_NONE;
|
||
|
|
huart1.Init.Mode = UART_MODE_TX_RX;
|
||
|
|
huart1.Init.HwFlowCtl = UART_HWCONTROL_RTS_CTS;
|
||
|
|
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||
|
|
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||
|
|
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||
|
|
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||
|
|
{
|
||
|
|
Error_Handler();
|
||
|
|
}
|
||
|
|
/* USER CODE BEGIN USART1_Init 2 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_Init 2 */
|
||
|
|
|
||
|
|
}
|
||
|
|
/* USART2 init function */
|
||
|
|
|
||
|
|
void MX_USART2_UART_Init(void)
|
||
|
|
{
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART2_Init 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_Init 0 */
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART2_Init 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_Init 1 */
|
||
|
|
huart2.Instance = USART2;
|
||
|
|
huart2.Init.BaudRate = 115200;
|
||
|
|
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||
|
|
huart2.Init.StopBits = UART_STOPBITS_1;
|
||
|
|
huart2.Init.Parity = UART_PARITY_NONE;
|
||
|
|
huart2.Init.Mode = UART_MODE_TX_RX;
|
||
|
|
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||
|
|
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||
|
|
huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||
|
|
huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||
|
|
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||
|
|
{
|
||
|
|
Error_Handler();
|
||
|
|
}
|
||
|
|
/* USER CODE BEGIN USART2_Init 2 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_Init 2 */
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||
|
|
{
|
||
|
|
|
||
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||
|
|
if(uartHandle->Instance==USART1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_MspInit 0 */
|
||
|
|
|
||
|
|
/** Initializes the peripherals clock
|
||
|
|
*/
|
||
|
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1;
|
||
|
|
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
||
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||
|
|
{
|
||
|
|
Error_Handler();
|
||
|
|
}
|
||
|
|
|
||
|
|
/* USART1 clock enable */
|
||
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
||
|
|
|
||
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||
|
|
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||
|
|
HAL_PWREx_EnableVddIO2();
|
||
|
|
/**USART1 GPIO Configuration
|
||
|
|
PB6 ------> USART1_TX
|
||
|
|
PG10 ------> USART1_RX
|
||
|
|
PG11 ------> USART1_CTS
|
||
|
|
PG12 ------> USART1_RTS
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = USART1_TX_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
||
|
|
HAL_GPIO_Init(USART1_TX_GPIO_Port, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = UART1_RX_Pin|UART1_CTS_Pin|UART1_RTS_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
||
|
|
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_MspInit 1 */
|
||
|
|
}
|
||
|
|
else if(uartHandle->Instance==USART2)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_MspInit 0 */
|
||
|
|
|
||
|
|
/** Initializes the peripherals clock
|
||
|
|
*/
|
||
|
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
|
||
|
|
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||
|
|
{
|
||
|
|
Error_Handler();
|
||
|
|
}
|
||
|
|
|
||
|
|
/* USART2 clock enable */
|
||
|
|
__HAL_RCC_USART2_CLK_ENABLE();
|
||
|
|
|
||
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||
|
|
/**USART2 GPIO Configuration
|
||
|
|
PD6 ------> USART2_RX
|
||
|
|
PA2 ------> USART2_TX
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = USART2_RX_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||
|
|
HAL_GPIO_Init(USART2_RX_GPIO_Port, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = USART2_TX_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
||
|
|
HAL_GPIO_Init(USART2_TX_GPIO_Port, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_MspInit 1 */
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(uartHandle->Instance==USART1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**USART1 GPIO Configuration
|
||
|
|
PB6 ------> USART1_TX
|
||
|
|
PG10 ------> USART1_RX
|
||
|
|
PG11 ------> USART1_CTS
|
||
|
|
PG12 ------> USART1_RTS
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(USART1_TX_GPIO_Port, USART1_TX_Pin);
|
||
|
|
|
||
|
|
HAL_GPIO_DeInit(GPIOG, UART1_RX_Pin|UART1_CTS_Pin|UART1_RTS_Pin);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
else if(uartHandle->Instance==USART2)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_USART2_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**USART2 GPIO Configuration
|
||
|
|
PD6 ------> USART2_RX
|
||
|
|
PA2 ------> USART2_TX
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(USART2_RX_GPIO_Port, USART2_RX_Pin);
|
||
|
|
|
||
|
|
HAL_GPIO_DeInit(USART2_TX_GPIO_Port, USART2_TX_Pin);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* USER CODE BEGIN 1 */
|
||
|
|
|
||
|
|
/* USER CODE END 1 */
|