You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
261 lines
8.8 KiB
261 lines
8.8 KiB
/* USER CODE BEGIN Header */ |
|
/** |
|
****************************************************************************** |
|
* @file gpio.c |
|
* @brief This file provides code for the configuration |
|
* of all used GPIO pins. |
|
****************************************************************************** |
|
* @attention |
|
* |
|
* Copyright (c) 2022 STMicroelectronics. |
|
* All rights reserved. |
|
* |
|
* This software is licensed under terms that can be found in the LICENSE file |
|
* in the root directory of this software component. |
|
* If no LICENSE file comes with this software, it is provided AS-IS. |
|
* |
|
****************************************************************************** |
|
*/ |
|
/* USER CODE END Header */ |
|
|
|
/* Includes ------------------------------------------------------------------*/ |
|
#include "gpio.h" |
|
|
|
/* USER CODE BEGIN 0 */ |
|
|
|
/* USER CODE END 0 */ |
|
|
|
/*----------------------------------------------------------------------------*/ |
|
/* Configure GPIO */ |
|
/*----------------------------------------------------------------------------*/ |
|
/* USER CODE BEGIN 1 */ |
|
|
|
/* USER CODE END 1 */ |
|
|
|
/** Configure pins as |
|
* Analog |
|
* Input |
|
* Output |
|
* EVENT_OUT |
|
* EXTI |
|
PH14 ------> DCMI_D4 |
|
PI7 ------> DCMI_D7 |
|
PI6 ------> S_TIM8_CH2 |
|
PH15 ------> TIM8_CH3N |
|
PH12 ------> DCMI_D3 |
|
PH13 ------> TIM8_CH1N |
|
PB9 ------> S_TIM4_CH4 |
|
PI4 ------> DCMI_D5 |
|
PH9 ------> DCMI_D0 |
|
PE5 ------> DCMI_D6 |
|
PI5 ------> DCMI_VSYNC |
|
PC7 ------> S_DATAIN3DFSDM1 |
|
PC4 ------> ADCx_IN13 |
|
PG8 ------> LPUART1_RX |
|
PG7 ------> LPUART1_TX |
|
PC0 ------> ADCx_IN1 |
|
PC1 ------> ADCx_IN2 |
|
PC2 ------> S_CKOUTDFSDM1 |
|
PA4 ------> ADCx_IN9 |
|
PH5 ------> DCMI_PIXCLK |
|
PH10 ------> DCMI_D1 |
|
PH11 ------> DCMI_D2 |
|
PH8 ------> DCMI_HSYNC |
|
PB12 ------> S_DATAIN1DFSDM1 |
|
*/ |
|
void MX_GPIO_Init(void) |
|
{ |
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0}; |
|
|
|
/* GPIO Ports Clock Enable */ |
|
__HAL_RCC_GPIOI_CLK_ENABLE(); |
|
__HAL_RCC_GPIOH_CLK_ENABLE(); |
|
__HAL_RCC_GPIOE_CLK_ENABLE(); |
|
__HAL_RCC_GPIOB_CLK_ENABLE(); |
|
__HAL_RCC_GPIOA_CLK_ENABLE(); |
|
__HAL_RCC_GPIOG_CLK_ENABLE(); |
|
HAL_PWREx_EnableVddIO2(); |
|
__HAL_RCC_GPIOD_CLK_ENABLE(); |
|
__HAL_RCC_GPIOC_CLK_ENABLE(); |
|
__HAL_RCC_GPIOF_CLK_ENABLE(); |
|
|
|
/*Configure GPIO pin Output Level */ |
|
HAL_GPIO_WritePin(LCD_BL_GPIO_Port, LCD_BL_Pin, GPIO_PIN_RESET); |
|
|
|
/*Configure GPIO pin Output Level */ |
|
HAL_GPIO_WritePin(GPIOH, MFX_WAKEUP_Pin|LCD_PWR_ON_Pin|MIC_VDD_Pin, GPIO_PIN_RESET); |
|
|
|
/*Configure GPIO pin Output Level */ |
|
HAL_GPIO_WritePin(Audio_RST_GPIO_Port, Audio_RST_Pin, GPIO_PIN_RESET); |
|
|
|
/*Configure GPIO pin Output Level */ |
|
HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_RESET); |
|
|
|
/*Configure GPIO pins : PIPin PIPin PIPin */ |
|
GPIO_InitStruct.Pin = JOY_DOWN_Pin|JOY_LEFT_Pin|JOY_UP_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT; |
|
GPIO_InitStruct.Pull = GPIO_PULLDOWN; |
|
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = STMOD_INT_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(STMOD_INT_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = LCD_BL_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
HAL_GPIO_Init(LCD_BL_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PHPin PHPin PHPin PHPin |
|
PHPin PHPin PHPin */ |
|
GPIO_InitStruct.Pin = DCMI_D4_Pin|DCMI_D3_Pin|DCMI_D0_Pin|DCMI_PIXCK_Pin |
|
|DCMI_D1_Pin|DCMI_D2_Pin|DCMI_HSYNC_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF10_DCMI; |
|
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PIPin PIPin PIPin */ |
|
GPIO_InitStruct.Pin = DCMI_D7_Pin|DCMI_D5_Pin|DCMI_VSYNC_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF10_DCMI; |
|
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = ARD_D6_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF3_TIM8; |
|
HAL_GPIO_Init(ARD_D6_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PHPin PHPin */ |
|
GPIO_InitStruct.Pin = ARD_D3_Pin|ARD_D9_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF3_TIM8; |
|
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = ARD_D5_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF2_TIM4; |
|
HAL_GPIO_Init(ARD_D5_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = LCD_TE_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(LCD_TE_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = DCMI_D6_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF10_DCMI; |
|
HAL_GPIO_Init(DCMI_D6_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PHPin PHPin PHPin */ |
|
GPIO_InitStruct.Pin = MFX_WAKEUP_Pin|LCD_PWR_ON_Pin|MIC_VDD_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = Audio_RST_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
HAL_GPIO_Init(Audio_RST_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = CTP_INT_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(CTP_INT_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PG13 */ |
|
GPIO_InitStruct.Pin = GPIO_PIN_13; |
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PCPin PCPin */ |
|
GPIO_InitStruct.Pin = DATIN3_Pin|DF_CKOUT_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF6_DFSDM1; |
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PCPin PCPin PC1 */ |
|
GPIO_InitStruct.Pin = ARD_A0_Pin|ARD_A5_Pin|GPIO_PIN_1; |
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pins : PGPin PGPin */ |
|
GPIO_InitStruct.Pin = ARD_D0_Pin|ARD_D1_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; |
|
GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1; |
|
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = MFX_IRQ_OUT_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(MFX_IRQ_OUT_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = STMOD_ADC_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(STMOD_ADC_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = JOY_RIGHT_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT; |
|
GPIO_InitStruct.Pull = GPIO_PULLDOWN; |
|
HAL_GPIO_Init(JOY_RIGHT_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = STMOD_RESET_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
HAL_GPIO_Init(STMOD_RESET_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = DFDATIN1_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
GPIO_InitStruct.Alternate = GPIO_AF6_DFSDM1; |
|
HAL_GPIO_Init(DFDATIN1_GPIO_Port, &GPIO_InitStruct); |
|
|
|
/*Configure GPIO pin : PtPin */ |
|
GPIO_InitStruct.Pin = LED1_Pin; |
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; |
|
GPIO_InitStruct.Pull = GPIO_NOPULL; |
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; |
|
HAL_GPIO_Init(LED1_GPIO_Port, &GPIO_InitStruct); |
|
|
|
} |
|
|
|
/* USER CODE BEGIN 2 */ |
|
|
|
/* USER CODE END 2 */
|
|
|