goran-mahovlic
/
eez-flow-template-stm32l496g-disco
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
14 Commits
1 Branch
0 Tags
5.8 MiB
 
 
 
 
 
 
Branch: main
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'main'
${ noResults }
eez-flow-template-stm32l496.../Drivers/BSP/STM32L496G-Discovery/stm32l496g_discovery_qspi.c

1133 lines
34 KiB
Raw Permalink Blame History

/**
******************************************************************************
* @file stm32l496g_discovery_qspi.c
* @author MCD Application Team
* @brief This file includes a standard driver for the MX25R6435F QSPI
* memory mounted on STM32L496G-Discovery board.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#) This driver is used to drive the MX25R6435F QSPI external
memory mounted on STM32L496G-DISCO evaluation board.
(#) This driver need a specific component driver (MX25R6435F) to be included with.
(#) Initialization steps:
(++) Initialize the QPSI external memory using the BSP_QSPI_Init() function. This
function includes the MSP layer hardware resources initialization and the
QSPI interface with the external memory. The BSP_QSPI_DeInit() can be used
to deactivate the QSPI interface.
(#) QSPI memory operations
(++) QSPI memory can be accessed with read/write operations once it is
initialized.
Read/write operation can be performed with AHB access using the functions
BSP_QSPI_Read()/BSP_QSPI_Write().
(++) The function to the QSPI memory in memory-mapped mode is possible after
the call of the function BSP_QSPI_EnableMemoryMappedMode().
(++) The function BSP_QSPI_GetInfo() returns the configuration of the QSPI memory.
(see the QSPI memory data sheet)
(++) Perform erase block operation using the function BSP_QSPI_Erase_Block() and by
specifying the block address. You can perform an erase operation of the whole
chip by calling the function BSP_QSPI_Erase_Chip().
(++) The function BSP_QSPI_GetStatus() returns the current status of the QSPI memory.
(see the QSPI memory data sheet)
(++) Perform erase sector operation using the function BSP_QSPI_Erase_Sector()
which is not blocking. So the function BSP_QSPI_GetStatus() should be used
to check if the memory is busy, and the functions BSP_QSPI_SuspendErase()/
BSP_QSPI_ResumeErase() can be used to perform other operations during the
sector erase.
(++) Deep power down of the QSPI memory is managed with the call of the functions
BSP_QSPI_EnterDeepPowerDown()/BSP_QSPI_LeaveDeepPowerDown()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32l496g_discovery_qspi.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32L496G_DISCOVERY
* @{
*/
/** @defgroup STM32L496G_DISCOVERY_QSPI STM32L496G-DISCOVERY QSPI
* @{
*/
/* Private constants --------------------------------------------------------*/
/** @defgroup STM32L496G_DISCOVERY_QSPI_Private_Constants Private Constants
* @{
*/
#define QSPI_QUAD_DISABLE 0x0
#define QSPI_QUAD_ENABLE 0x1
#define QSPI_HIGH_PERF_DISABLE 0x0
#define QSPI_HIGH_PERF_ENABLE 0x1
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup STM32L496G_DISCOVERY_QSPI_Private_Variables Private Variables
* @{
*/
QSPI_HandleTypeDef QSPIHandle;
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup STM32L496G_DISCOVERY_QSPI_Private_Functions Private Functions
* @{
*/
static void QSPI_MspInit(void);
static void QSPI_MspDeInit(void);
static uint8_t QSPI_ResetMemory(QSPI_HandleTypeDef *hqspi);
static uint8_t QSPI_WriteEnable(QSPI_HandleTypeDef *hqspi);
static uint8_t QSPI_AutoPollingMemReady(QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
static uint8_t QSPI_QuadMode(QSPI_HandleTypeDef *hqspi, uint8_t Operation);
static uint8_t QSPI_HighPerfMode(QSPI_HandleTypeDef *hqspi, uint8_t Operation);
/**
* @}
*/
/* Exported functions ---------------------------------------------------------*/
/** @addtogroup STM32L496G_DISCOVERY_QSPI_Exported_Functions
* @{
*/
/**
* @brief Initializes the QSPI interface.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_Init(void)
{
QSPIHandle.Instance = QUADSPI;
/* Call the DeInit function to reset the driver */
if (HAL_QSPI_DeInit(&QSPIHandle) != HAL_OK)
{
return QSPI_ERROR;
}
/* System level initialization */
QSPI_MspInit();
/* QSPI initialization */
QSPIHandle.Init.ClockPrescaler = 2; /* QSPI clock = 80MHz / (ClockPrescaler+1) = 26.67MHz */
QSPIHandle.Init.FifoThreshold = 4;
QSPIHandle.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
QSPIHandle.Init.FlashSize = POSITION_VAL(MX25R6435F_FLASH_SIZE) - 1;
QSPIHandle.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_1_CYCLE;
QSPIHandle.Init.ClockMode = QSPI_CLOCK_MODE_0;
if (HAL_QSPI_Init(&QSPIHandle) != HAL_OK)
{
return QSPI_ERROR;
}
/* QSPI memory reset */
if (QSPI_ResetMemory(&QSPIHandle) != QSPI_OK)
{
return QSPI_NOT_SUPPORTED;
}
/* QSPI quad enable */
if (QSPI_QuadMode(&QSPIHandle, QSPI_QUAD_ENABLE) != QSPI_OK)
{
return QSPI_ERROR;
}
/* High performance mode enable */
if (QSPI_HighPerfMode(&QSPIHandle, QSPI_HIGH_PERF_ENABLE) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Re-configure the clock for the high performance mode */
QSPIHandle.Init.ClockPrescaler = 1; /* QSPI clock = 80MHz / (ClockPrescaler+1) = 40MHz */
if (HAL_QSPI_Init(&QSPIHandle) != HAL_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief De-Initializes the QSPI interface.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_DeInit(void)
{
QSPIHandle.Instance = QUADSPI;
/* Call the DeInit function to reset the driver */
if (HAL_QSPI_DeInit(&QSPIHandle) != HAL_OK)
{
return QSPI_ERROR;
}
/* System level De-initialization */
QSPI_MspDeInit();
return QSPI_OK;
}
/**
* @brief Reads an amount of data from the QSPI memory.
* @param pData : Pointer to data to be read
* @param ReadAddr : Read start address
* @param Size : Size of data to read
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_Read(uint8_t *pData, uint32_t ReadAddr, uint32_t Size)
{
QSPI_CommandTypeDef sCommand;
/* Initialize the read command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = QUAD_INOUT_READ_CMD;
sCommand.AddressMode = QSPI_ADDRESS_4_LINES;
sCommand.AddressSize = QSPI_ADDRESS_24_BITS;
sCommand.Address = ReadAddr;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_4_LINES;
sCommand.AlternateBytesSize = QSPI_ALTERNATE_BYTES_8_BITS;
sCommand.AlternateBytes = MX25R6435F_ALT_BYTES_NO_PE_MODE;
sCommand.DataMode = QSPI_DATA_4_LINES;
sCommand.DummyCycles = MX25R6435F_DUMMY_CYCLES_READ_QUAD;
sCommand.NbData = Size;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Configure the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Reception of the data */
if (HAL_QSPI_Receive(&QSPIHandle, pData, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief Writes an amount of data to the QSPI memory.
* @param pData : Pointer to data to be written
* @param WriteAddr : Write start address
* @param Size : Size of data to write
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_Write(uint8_t *pData, uint32_t WriteAddr, uint32_t Size)
{
QSPI_CommandTypeDef sCommand;
uint32_t end_addr, current_size, current_addr;
/* Calculation of the size between the write address and the end of the page */
current_size = MX25R6435F_PAGE_SIZE - (WriteAddr % MX25R6435F_PAGE_SIZE);
/* Check if the size of the data is less than the remaining place in the page */
if (current_size > Size)
{
current_size = Size;
}
/* Initialize the address variables */
current_addr = WriteAddr;
end_addr = WriteAddr + Size;
/* Initialize the program command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = QUAD_PAGE_PROG_CMD;
sCommand.AddressMode = QSPI_ADDRESS_4_LINES;
sCommand.AddressSize = QSPI_ADDRESS_24_BITS;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_4_LINES;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Perform the write page by page */
do
{
sCommand.Address = current_addr;
sCommand.NbData = current_size;
/* Enable write operations */
if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Configure the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Transmission of the data */
if (HAL_QSPI_Transmit(&QSPIHandle, pData, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Configure automatic polling mode to wait for end of program */
if (QSPI_AutoPollingMemReady(&QSPIHandle, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Update the address and size variables for next page programming */
current_addr += current_size;
pData += current_size;
current_size = ((current_addr + MX25R6435F_PAGE_SIZE) > end_addr) ? (end_addr - current_addr) : MX25R6435F_PAGE_SIZE;
}
while (current_addr < end_addr);
return QSPI_OK;
}
/**
* @brief Erases the specified block of the QSPI memory.
* @param BlockAddress : Block address to erase
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_Erase_Block(uint32_t BlockAddress)
{
QSPI_CommandTypeDef sCommand;
/* Initialize the erase command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = BLOCK_ERASE_CMD;
sCommand.AddressMode = QSPI_ADDRESS_1_LINE;
sCommand.AddressSize = QSPI_ADDRESS_24_BITS;
sCommand.Address = BlockAddress;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Enable write operations */
if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Configure automatic polling mode to wait for end of erase */
if (QSPI_AutoPollingMemReady(&QSPIHandle, MX25R6435F_BLOCK_ERASE_MAX_TIME) != QSPI_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief Erases the specified sector of the QSPI memory.
* @param Sector : Sector address to erase (0 to 255)
* @retval QSPI memory status
* @note This function is non blocking meaning that sector erase
* operation is started but not completed when the function
* returns. Application has to call BSP_QSPI_GetStatus()
* to know when the device is available again (i.e. erase operation
* completed).
*/
uint8_t BSP_QSPI_Erase_Sector(uint32_t Sector)
{
QSPI_CommandTypeDef sCommand;
if (Sector >= (uint32_t)(MX25R6435F_FLASH_SIZE / MX25R6435F_SECTOR_SIZE))
{
return QSPI_ERROR;
}
/* Initialize the erase command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = SECTOR_ERASE_CMD;
sCommand.AddressMode = QSPI_ADDRESS_1_LINE;
sCommand.AddressSize = QSPI_ADDRESS_24_BITS;
sCommand.Address = (Sector * MX25R6435F_SECTOR_SIZE);
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Enable write operations */
if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief Erases the entire QSPI memory.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_Erase_Chip(void)
{
QSPI_CommandTypeDef sCommand;
/* Initialize the erase command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = CHIP_ERASE_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Enable write operations */
if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Configure automatic polling mode to wait for end of erase */
if (QSPI_AutoPollingMemReady(&QSPIHandle, MX25R6435F_CHIP_ERASE_MAX_TIME) != QSPI_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief Reads current status of the QSPI memory.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_GetStatus(void)
{
QSPI_CommandTypeDef sCommand;
uint8_t reg;
/* Initialize the read security register command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = READ_SEC_REG_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_1_LINE;
sCommand.DummyCycles = 0;
sCommand.NbData = 1;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Configure the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Reception of the data */
if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Check the value of the register */
if ((reg & (MX25R6435F_SECR_P_FAIL | MX25R6435F_SECR_E_FAIL)) != 0)
{
return QSPI_ERROR;
}
else if ((reg & (MX25R6435F_SECR_PSB | MX25R6435F_SECR_ESB)) != 0)
{
return QSPI_SUSPENDED;
}
/* Initialize the read status register command */
sCommand.Instruction = READ_STATUS_REG_CMD;
/* Configure the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Reception of the data */
if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Check the value of the register */
if ((reg & MX25R6435F_SR_WIP) != 0)
{
return QSPI_BUSY;
}
else
{
return QSPI_OK;
}
}
/**
* @brief Return the configuration of the QSPI memory.
* @param pInfo : pointer on the configuration structure
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_GetInfo(QSPI_Info *pInfo)
{
/* Configure the structure with the memory configuration */
pInfo->FlashSize = MX25R6435F_FLASH_SIZE;
pInfo->EraseSectorSize = MX25R6435F_SECTOR_SIZE;
pInfo->EraseSectorsNumber = (MX25R6435F_FLASH_SIZE / MX25R6435F_SECTOR_SIZE);
pInfo->ProgPageSize = MX25R6435F_PAGE_SIZE;
pInfo->ProgPagesNumber = (MX25R6435F_FLASH_SIZE / MX25R6435F_PAGE_SIZE);
return QSPI_OK;
}
/**
* @brief Configure the QSPI in memory-mapped mode
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_EnableMemoryMappedMode(void)
{
QSPI_CommandTypeDef sCommand;
QSPI_MemoryMappedTypeDef sMemMappedCfg;
/* Configure the command for the read instruction */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = QUAD_INOUT_READ_CMD;
sCommand.AddressMode = QSPI_ADDRESS_4_LINES;
sCommand.AddressSize = QSPI_ADDRESS_24_BITS;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_4_LINES;
sCommand.AlternateBytesSize = QSPI_ALTERNATE_BYTES_8_BITS;
sCommand.AlternateBytes = MX25R6435F_ALT_BYTES_NO_PE_MODE;
sCommand.DataMode = QSPI_DATA_4_LINES;
sCommand.DummyCycles = MX25R6435F_DUMMY_CYCLES_READ_QUAD;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Configure the memory mapped mode */
sMemMappedCfg.TimeOutActivation = QSPI_TIMEOUT_COUNTER_DISABLE;
if (HAL_QSPI_MemoryMapped(&QSPIHandle, &sCommand, &sMemMappedCfg) != HAL_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function suspends an ongoing erase command.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_SuspendErase(void)
{
QSPI_CommandTypeDef sCommand;
/* Check whether the device is busy (erase operation is
in progress).
*/
if (BSP_QSPI_GetStatus() == QSPI_BUSY)
{
/* Initialize the erase command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = PROG_ERASE_SUSPEND_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (BSP_QSPI_GetStatus() == QSPI_SUSPENDED)
{
return QSPI_OK;
}
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function resumes a paused erase command.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_ResumeErase(void)
{
QSPI_CommandTypeDef sCommand;
/* Check whether the device is in suspended state */
if (BSP_QSPI_GetStatus() == QSPI_SUSPENDED)
{
/* Initialize the erase command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = PROG_ERASE_RESUME_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/*
When this command is executed, the status register write in progress bit is set to 1, and
the flag status register program erase controller bit is set to 0. This command is ignored
if the device is not in a suspended state.
*/
if (BSP_QSPI_GetStatus() == QSPI_BUSY)
{
return QSPI_OK;
}
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function enter the QSPI memory in deep power down mode.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_EnterDeepPowerDown(void)
{
QSPI_CommandTypeDef sCommand;
/* Initialize the deep power down command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = DEEP_POWER_DOWN_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* --- Memory takes 10us max to enter deep power down --- */
/* --- At least 30us should be respected before leaving deep power down --- */
return QSPI_OK;
}
/**
* @brief This function leave the QSPI memory from deep power down mode.
* @retval QSPI memory status
*/
uint8_t BSP_QSPI_LeaveDeepPowerDown(void)
{
QSPI_CommandTypeDef sCommand;
/* Initialize the erase command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = NO_OPERATION_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* --- A NOP command is sent to the memory, as the nCS should be low for at least 20 ns --- */
/* --- Memory takes 35us min to leave deep power down --- */
return QSPI_OK;
}
/**
* @}
*/
/** @addtogroup STM32L496G_DISCOVERY_QSPI_Private_Functions
* @{
*/
/**
* @brief Initializes the QSPI MSP.
* @retval None
*/
static void QSPI_MspInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Enable the QuadSPI memory interface clock */
__HAL_RCC_QSPI_CLK_ENABLE();
/* Reset the QuadSPI memory interface */
__HAL_RCC_QSPI_FORCE_RESET();
__HAL_RCC_QSPI_RELEASE_RESET();
/* Enable GPIO clocks */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/* QSPI CS GPIO pin configuration */
GPIO_InitStruct.Pin = GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* QSPI CLK, D0, D1, D2 and D3 GPIO pins configuration */
GPIO_InitStruct.Pin = (GPIO_PIN_3 | GPIO_PIN_6 | GPIO_PIN_7);
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = (GPIO_PIN_0 | GPIO_PIN_1);
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
}
/**
* @brief De-Initializes the QSPI MSP.
* @retval None
*/
static void QSPI_MspDeInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* QSPI CLK, CS, D0-D3 GPIO pins de-configuration */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
HAL_GPIO_DeInit(GPIOA, (GPIO_PIN_6 | GPIO_PIN_7));
HAL_GPIO_DeInit(GPIOB, (GPIO_PIN_0 | GPIO_PIN_1));
/* Set GPIOB pin 11 in pull up mode (optimum default setting) */
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pin = GPIO_PIN_11;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* Set GPIOA pin 3 in no pull, low state (optimum default setting) */
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP ;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Pin = GPIO_PIN_3;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3, GPIO_PIN_RESET);
/* Reset the QuadSPI memory interface */
__HAL_RCC_QSPI_FORCE_RESET();
__HAL_RCC_QSPI_RELEASE_RESET();
/* Disable the QuadSPI memory interface clock */
__HAL_RCC_QSPI_CLK_DISABLE();
}
/**
* @brief This function reset the QSPI memory.
* @param hqspi : QSPI handle
* @retval None
*/
static uint8_t QSPI_ResetMemory(QSPI_HandleTypeDef *hqspi)
{
QSPI_CommandTypeDef sCommand;
/* Initialize the reset enable command */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = RESET_ENABLE_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
/* Send the command */
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Send the reset memory command */
sCommand.Instruction = RESET_MEMORY_CMD;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Configure automatic polling mode to wait the memory is ready */
if (QSPI_AutoPollingMemReady(&QSPIHandle, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != QSPI_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function send a Write Enable and wait it is effective.
* @param hqspi : QSPI handle
* @retval None
*/
static uint8_t QSPI_WriteEnable(QSPI_HandleTypeDef *hqspi)
{
QSPI_CommandTypeDef sCommand;
QSPI_AutoPollingTypeDef sConfig;
/* Enable write operations */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = WRITE_ENABLE_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_NONE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Configure automatic polling mode to wait for write enabling */
sConfig.Match = MX25R6435F_SR_WEL;
sConfig.Mask = MX25R6435F_SR_WEL;
sConfig.MatchMode = QSPI_MATCH_MODE_AND;
sConfig.StatusBytesSize = 1;
sConfig.Interval = 0x10;
sConfig.AutomaticStop = QSPI_AUTOMATIC_STOP_ENABLE;
sCommand.Instruction = READ_STATUS_REG_CMD;
sCommand.DataMode = QSPI_DATA_1_LINE;
if (HAL_QSPI_AutoPolling(&QSPIHandle, &sCommand, &sConfig, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function read the SR of the memory and wait the EOP.
* @param hqspi : QSPI handle
* @param Timeout : Timeout for auto-polling
* @retval None
*/
static uint8_t QSPI_AutoPollingMemReady(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
{
QSPI_CommandTypeDef sCommand;
QSPI_AutoPollingTypeDef sConfig;
/* Configure automatic polling mode to wait for memory ready */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = READ_STATUS_REG_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_1_LINE;
sCommand.DummyCycles = 0;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
sConfig.Match = 0;
sConfig.Mask = MX25R6435F_SR_WIP;
sConfig.MatchMode = QSPI_MATCH_MODE_AND;
sConfig.StatusBytesSize = 1;
sConfig.Interval = 0x10;
sConfig.AutomaticStop = QSPI_AUTOMATIC_STOP_ENABLE;
if (HAL_QSPI_AutoPolling(&QSPIHandle, &sCommand, &sConfig, Timeout) != HAL_OK)
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function enables/disables the Quad mode of the memory.
* @param hqspi : QSPI handle
* @param Operation : QSPI_QUAD_ENABLE or QSPI_QUAD_DISABLE mode
* @retval None
*/
static uint8_t QSPI_QuadMode(QSPI_HandleTypeDef *hqspi, uint8_t Operation)
{
QSPI_CommandTypeDef sCommand;
uint8_t reg;
/* Read status register */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = READ_STATUS_REG_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_1_LINE;
sCommand.DummyCycles = 0;
sCommand.NbData = 1;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Enable write operations */
if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Activate/deactivate the Quad mode */
if (Operation == QSPI_QUAD_ENABLE)
{
SET_BIT(reg, MX25R6435F_SR_QE);
}
else
{
CLEAR_BIT(reg, MX25R6435F_SR_QE);
}
sCommand.Instruction = WRITE_STATUS_CFG_REG_CMD;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Transmit(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Wait that memory is ready */
if (QSPI_AutoPollingMemReady(&QSPIHandle, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Check the configuration has been correctly done */
sCommand.Instruction = READ_STATUS_REG_CMD;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if ((((reg & MX25R6435F_SR_QE) == 0) && (Operation == QSPI_QUAD_ENABLE)) ||
(((reg & MX25R6435F_SR_QE) != 0) && (Operation == QSPI_QUAD_DISABLE)))
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @brief This function enables/disables the high performance mode of the memory.
* @param hqspi : QSPI handle
* @param Operation : QSPI_HIGH_PERF_ENABLE or QSPI_HIGH_PERF_DISABLE high performance mode
* @retval None
*/
static uint8_t QSPI_HighPerfMode(QSPI_HandleTypeDef *hqspi, uint8_t Operation)
{
QSPI_CommandTypeDef sCommand;
uint8_t reg[3];
/* Read status register */
sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE;
sCommand.Instruction = READ_STATUS_REG_CMD;
sCommand.AddressMode = QSPI_ADDRESS_NONE;
sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
sCommand.DataMode = QSPI_DATA_1_LINE;
sCommand.DummyCycles = 0;
sCommand.NbData = 1;
sCommand.DdrMode = QSPI_DDR_MODE_DISABLE;
sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY;
sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Receive(&QSPIHandle, &(reg[0]), HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Read configuration registers */
sCommand.Instruction = READ_CFG_REG_CMD;
sCommand.NbData = 2;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Receive(&QSPIHandle, &(reg[1]), HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Enable write operations */
if (QSPI_WriteEnable(&QSPIHandle) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Activate/deactivate the Quad mode */
if (Operation == QSPI_HIGH_PERF_ENABLE)
{
SET_BIT(reg[2], MX25R6435F_CR2_LH_SWITCH);
}
else
{
CLEAR_BIT(reg[2], MX25R6435F_CR2_LH_SWITCH);
}
sCommand.Instruction = WRITE_STATUS_CFG_REG_CMD;
sCommand.NbData = 3;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Transmit(&QSPIHandle, &(reg[0]), HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
/* Wait that memory is ready */
if (QSPI_AutoPollingMemReady(&QSPIHandle, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != QSPI_OK)
{
return QSPI_ERROR;
}
/* Check the configuration has been correctly done */
sCommand.Instruction = READ_CFG_REG_CMD;
sCommand.NbData = 2;
if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if (HAL_QSPI_Receive(&QSPIHandle, &(reg[0]), HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return QSPI_ERROR;
}
if ((((reg[1] & MX25R6435F_CR2_LH_SWITCH) == 0) && (Operation == QSPI_HIGH_PERF_ENABLE)) ||
(((reg[1] & MX25R6435F_CR2_LH_SWITCH) != 0) && (Operation == QSPI_HIGH_PERF_DISABLE)))
{
return QSPI_ERROR;
}
return QSPI_OK;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/