You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

150 lines
5.0 KiB

/**
******************************************************************************
* @file idd.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the IDD driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __IDD_H
#define __IDD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup IDD
* @{
*/
/** @defgroup IDD_Exported_Types IDD Exported Types
* @{
*/
/** @defgroup IDD_Config_structure IDD Configuration structure
* @{
*/
typedef struct
{
uint16_t AmpliGain; /*!< Specifies ampli gain value
*/
uint16_t VddMin; /*!< Specifies minimum MCU VDD can reach to protect MCU from reset
*/
uint16_t Shunt0Value; /*!< Specifies value of Shunt 0 if existing
*/
uint16_t Shunt1Value; /*!< Specifies value of Shunt 1 if existing
*/
uint16_t Shunt2Value; /*!< Specifies value of Shunt 2 if existing
*/
uint16_t Shunt3Value; /*!< Specifies value of Shunt 3 if existing
*/
uint16_t Shunt4Value; /*!< Specifies value of Shunt 4 if existing
*/
uint16_t Shunt0StabDelay; /*!< Specifies delay of Shunt 0 stabilization if existing
*/
uint16_t Shunt1StabDelay; /*!< Specifies delay of Shunt 1 stabilization if existing
*/
uint16_t Shunt2StabDelay; /*!< Specifies delay of Shunt 2 stabilization if existing
*/
uint16_t Shunt3StabDelay; /*!< Specifies delay of Shunt 3 stabilization if existing
*/
uint16_t Shunt4StabDelay; /*!< Specifies delay of Shunt 4 stabilization if existing
*/
uint8_t ShuntNbOnBoard; /*!< Specifies number of shunts that are present on board
This parameter can be a value of @ref IDD_shunt_number */
uint8_t ShuntNbUsed; /*!< Specifies number of shunts used for measurement
This parameter can be a value of @ref IDD_shunt_number */
uint8_t VrefMeasurement; /*!< Specifies if Vref is automatically measured before each Idd measurement
This parameter can be a value of @ref IDD_Vref_Measurement */
uint8_t Calibration; /*!< Specifies if calibration is done before each Idd measurement
*/
uint8_t PreDelayUnit; /*!< Specifies Pre delay unit
This parameter can be a value of @ref IDD_PreDelay */
uint8_t PreDelayValue; /*!< Specifies Pre delay value in selected unit
*/
uint8_t MeasureNb; /*!< Specifies number of Measure to be performed
This parameter can be a value between 1 and 256 */
uint8_t DeltaDelayUnit; /*!< Specifies Delta delay unit
This parameter can be a value of @ref IDD_DeltaDelay */
uint8_t DeltaDelayValue; /*!< Specifies Delta delay between 2 measures
value can be between 1 and 128 */
}IDD_ConfigTypeDef;
/**
* @}
*/
/** @defgroup IDD_Driver_structure IDD Driver structure
* @{
*/
typedef struct
{
void (*Init)(uint16_t);
void (*DeInit)(uint16_t);
uint16_t (*ReadID)(uint16_t);
void (*Reset)(uint16_t);
void (*LowPower)(uint16_t);
void (*WakeUp)(uint16_t);
void (*Start)(uint16_t);
void (*Config)(uint16_t,IDD_ConfigTypeDef);
void (*GetValue)(uint16_t, uint32_t *);
void (*EnableIT)(uint16_t);
void (*ClearIT)(uint16_t);
uint8_t (*GetITStatus)(uint16_t);
void (*DisableIT)(uint16_t);
void (*ErrorEnableIT)(uint16_t);
void (*ErrorClearIT)(uint16_t);
uint8_t (*ErrorGetITStatus)(uint16_t);
void (*ErrorDisableIT)(uint16_t);
uint8_t (*ErrorGetSrc)(uint16_t);
uint8_t (*ErrorGetCode)(uint16_t);
}IDD_DrvTypeDef;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __IDD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/