You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

145 lines
3.9 KiB

/**
******************************************************************************
* @file stm32l496g_discovery_idd.h
* @author MCD Application Team
* @brief Header file for stm32l496g_discovery_idd.c module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L496G_DISCOVERY_IDD_H
#define __STM32L496G_DISCOVERY_IDD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l496g_discovery.h"
/* Include Idd measurement component driver */
#include "../Components/mfxstm32l152/mfxstm32l152.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32L496G_DISCOVERY
* @{
*/
/** @addtogroup STM32L496G_DISCOVERY_IDD
* @{
*/
/** @defgroup STM32L496G_DISCOVERY_IDD_Exported_Types Exported Types
* @{
*/
/** @defgroup IDD_Config IDD Config
* @{
*/
typedef enum
{
IDD_OK = 0,
IDD_TIMEOUT = 1,
IDD_ZERO_VALUE = 2,
IDD_ERROR = 0xFF
}
IDD_StatusTypeDef;
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32L496G_DISCOVERY_IDD_Exported_Defines Exported Defines
* @{
*/
/**
* @brief Shunt values on discovery in milli ohms
*/
#define DISCOVERY_IDD_SHUNT0_VALUE ((uint16_t) 1000) /*!< value in milliohm */
#define DISCOVERY_IDD_SHUNT1_VALUE ((uint16_t) 24) /*!< value in ohm */
#define DISCOVERY_IDD_SHUNT2_VALUE ((uint16_t) 620) /*!< value in ohm */
#define DISCOVERY_IDD_SHUNT4_VALUE ((uint16_t) 10000) /*!< value in ohm */
/**
* @brief Shunt stabilization delay on discovery in milli ohms
*/
#define DISCOVERY_IDD_SHUNT0_STABDELAY ((uint8_t) 149) /*!< value in millisec */
#define DISCOVERY_IDD_SHUNT1_STABDELAY ((uint8_t) 149) /*!< value in millisec */
#define DISCOVERY_IDD_SHUNT2_STABDELAY ((uint8_t) 149) /*!< value in millisec */
#define DISCOVERY_IDD_SHUNT4_STABDELAY ((uint8_t) 255) /*!< value in millisec */
/**
* @brief IDD Ampli Gain on discovery
*/
#define DISCOVERY_IDD_AMPLI_GAIN ((uint16_t) 4967) /*!< value is gain * 100 */
/**
* @brief IDD Vdd Min on discovery
*/
#define DISCOVERY_IDD_VDD_MIN ((uint16_t) 2000) /*!< value in millivolt */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup STM32L496G_DISCOVERY_IDD_Exported_Functions Exported Functions
* @{
*/
uint8_t BSP_IDD_Init(void);
void BSP_IDD_DeInit(void);
void BSP_IDD_Reset(void);
void BSP_IDD_LowPower(void);
void BSP_IDD_WakeUp(void);
void BSP_IDD_StartMeasure(void);
void BSP_IDD_Config(IDD_ConfigTypeDef IddConfig);
void BSP_IDD_GetValue(uint32_t *IddValue);
void BSP_IDD_EnableIT(void);
void BSP_IDD_ClearIT(void);
uint8_t BSP_IDD_GetITStatus(void);
void BSP_IDD_DisableIT(void);
uint8_t BSP_IDD_ErrorGetCode(void);
void BSP_IDD_ErrorEnableIT(void);
void BSP_IDD_ErrorClearIT(void);
uint8_t BSP_IDD_ErrorGetITStatus(void);
void BSP_IDD_ErrorDisableIT(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L496G_DISCOVERY_IDD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/