Template project for running EEZ Flow firmware project using STM32F469I-DISCO development board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

92 lines
3.2 KiB

2 years ago
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file bsp_driver_sd.h for F4 (based on stm324x9i_eval_sd.h)
* @brief This file contains the common defines and functions prototypes for
* the bsp_driver_sd.c driver.
******************************************************************************
* @attention
*
* Copyright (c) 2022 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4_SD_H
#define __STM32F4_SD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
#include "fatfs_platform.h"
/* Exported types --------------------------------------------------------*/
/**
* @brief SD Card information structure
*/
#define BSP_SD_CardInfo HAL_SD_CardInfoTypeDef
/* Exported constants --------------------------------------------------------*/
/**
* @brief SD status structure definition
*/
#define MSD_OK ((uint8_t)0x00)
#define MSD_ERROR ((uint8_t)0x01)
/**
* @brief SD transfer state definition
*/
#define SD_TRANSFER_OK ((uint8_t)0x00)
#define SD_TRANSFER_BUSY ((uint8_t)0x01)
#define SD_PRESENT ((uint8_t)0x01)
#define SD_NOT_PRESENT ((uint8_t)0x00)
#define SD_DATATIMEOUT ((uint32_t)100000000)
#ifdef OLD_API
/* kept to avoid issue when migrating old projects. */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
#else
/* USER CODE BEGIN BSP_H_CODE */
/* Exported functions --------------------------------------------------------*/
uint8_t BSP_SD_Init(void);
uint8_t BSP_SD_ITConfig(void);
void BSP_SD_DetectIT(void);
void BSP_SD_DetectCallback(void);
uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout);
uint8_t BSP_SD_ReadBlocks_DMA(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks);
uint8_t BSP_SD_WriteBlocks_DMA(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks);
uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr);
void BSP_SD_IRQHandler(void);
void BSP_SD_DMA_Tx_IRQHandler(void);
void BSP_SD_DMA_Rx_IRQHandler(void);
uint8_t BSP_SD_GetCardState(void);
void BSP_SD_GetCardInfo(HAL_SD_CardInfoTypeDef *CardInfo);
uint8_t BSP_SD_IsDetected(void);
/* These functions can be modified in case the current settings (e.g. DMA stream)
need to be changed for specific application needs */
void BSP_SD_AbortCallback(void);
void BSP_SD_WriteCpltCallback(void);
void BSP_SD_ReadCpltCallback(void);
/* USER CODE END BSP_H_CODE */
#endif
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4_SD_H */