Template project for running EEZ Flow firmware project using STM32F469I-DISCO development board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

549 lines
15 KiB

2 years ago
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : Target/usbh_conf.c
* @version : v1.0_Cube
* @brief : This file implements the board support package for the USB host library
******************************************************************************
* @attention
*
* Copyright (c) 2022 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "usbh_core.h"
#include "usbh_platform.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/
/* USER CODE END PV */
HCD_HandleTypeDef hhcd_USB_OTG_FS;
void Error_Handler(void);
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
USBH_StatusTypeDef USBH_Get_USB_Status(HAL_StatusTypeDef hal_status);
/* USER CODE END PFP */
/* Private functions ---------------------------------------------------------*/
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/*******************************************************************************
LL Driver Callbacks (HCD -> USB Host Library)
*******************************************************************************/
/* MSP Init */
void HAL_HCD_MspInit(HCD_HandleTypeDef* hcdHandle)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hcdHandle->Instance==USB_OTG_FS)
{
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
/* USER CODE END USB_OTG_FS_MspInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USB_OTG_FS GPIO Configuration
PA12 ------> USB_OTG_FS_DP
PA11 ------> USB_OTG_FS_DM
PA10 ------> USB_OTG_FS_ID
PA9 ------> USB_OTG_FS_VBUS
*/
GPIO_InitStruct.Pin = USB_FS1_P_Pin|USB_FS1_N_Pin|USB_FS1_ID_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = VBUS_FS1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(VBUS_FS1_GPIO_Port, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
/* Peripheral interrupt init */
HAL_NVIC_SetPriority(OTG_FS_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
/* USER CODE END USB_OTG_FS_MspInit 1 */
}
}
void HAL_HCD_MspDeInit(HCD_HandleTypeDef* hcdHandle)
{
if(hcdHandle->Instance==USB_OTG_FS)
{
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
/**USB_OTG_FS GPIO Configuration
PA12 ------> USB_OTG_FS_DP
PA11 ------> USB_OTG_FS_DM
PA10 ------> USB_OTG_FS_ID
PA9 ------> USB_OTG_FS_VBUS
*/
HAL_GPIO_DeInit(GPIOA, USB_FS1_P_Pin|USB_FS1_N_Pin|USB_FS1_ID_Pin|VBUS_FS1_Pin);
/* Peripheral interrupt Deinit*/
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
}
}
/**
* @brief SOF callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_IncTimer(hhcd->pData);
}
/**
* @brief SOF callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_Connect(hhcd->pData);
}
/**
* @brief SOF callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_Disconnect(hhcd->pData);
}
/**
* @brief Notify URB state change callback.
* @param hhcd: HCD handle
* @param chnum: channel number
* @param urb_state: state
* @retval None
*/
void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
{
/* To be used with OS to sync URB state with the global state machine */
#if (USBH_USE_OS == 1)
USBH_LL_NotifyURBChange(hhcd->pData);
#endif
}
/**
* @brief Port Port Enabled callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_PortEnabled(hhcd->pData);
}
/**
* @brief Port Port Disabled callback.
* @param hhcd: HCD handle
* @retval None
*/
void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd)
{
USBH_LL_PortDisabled(hhcd->pData);
}
/*******************************************************************************
LL Driver Interface (USB Host Library --> HCD)
*******************************************************************************/
/**
* @brief Initialize the low level portion of the host driver.
* @param phost: Host handle
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef *phost)
{
/* Init USB_IP */
if (phost->id == HOST_FS) {
/* Link the driver to the stack. */
hhcd_USB_OTG_FS.pData = phost;
phost->pData = &hhcd_USB_OTG_FS;
hhcd_USB_OTG_FS.Instance = USB_OTG_FS;
hhcd_USB_OTG_FS.Init.Host_channels = 8;
hhcd_USB_OTG_FS.Init.speed = HCD_SPEED_FULL;
hhcd_USB_OTG_FS.Init.dma_enable = DISABLE;
hhcd_USB_OTG_FS.Init.phy_itface = HCD_PHY_EMBEDDED;
hhcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
if (HAL_HCD_Init(&hhcd_USB_OTG_FS) != HAL_OK)
{
Error_Handler( );
}
USBH_LL_SetTimer(phost, HAL_HCD_GetCurrentFrame(&hhcd_USB_OTG_FS));
}
return USBH_OK;
}
/**
* @brief De-Initialize the low level portion of the host driver.
* @param phost: Host handle
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_DeInit(USBH_HandleTypeDef *phost)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_DeInit(phost->pData);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Start the low level portion of the host driver.
* @param phost: Host handle
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef *phost)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_Start(phost->pData);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Stop the low level portion of the host driver.
* @param phost: Host handle
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_Stop(USBH_HandleTypeDef *phost)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_Stop(phost->pData);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Return the USB host speed from the low level driver.
* @param phost: Host handle
* @retval USBH speeds
*/
USBH_SpeedTypeDef USBH_LL_GetSpeed(USBH_HandleTypeDef *phost)
{
USBH_SpeedTypeDef speed = USBH_SPEED_FULL;
switch (HAL_HCD_GetCurrentSpeed(phost->pData))
{
case 0 :
speed = USBH_SPEED_HIGH;
break;
case 1 :
speed = USBH_SPEED_FULL;
break;
case 2 :
speed = USBH_SPEED_LOW;
break;
default:
speed = USBH_SPEED_FULL;
break;
}
return speed;
}
/**
* @brief Reset the Host port of the low level driver.
* @param phost: Host handle
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_ResetPort(USBH_HandleTypeDef *phost)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_ResetPort(phost->pData);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Return the last transferred packet size.
* @param phost: Host handle
* @param pipe: Pipe index
* @retval Packet size
*/
uint32_t USBH_LL_GetLastXferSize(USBH_HandleTypeDef *phost, uint8_t pipe)
{
return HAL_HCD_HC_GetXferCount(phost->pData, pipe);
}
/**
* @brief Open a pipe of the low level driver.
* @param phost: Host handle
* @param pipe_num: Pipe index
* @param epnum: Endpoint number
* @param dev_address: Device USB address
* @param speed: Device Speed
* @param ep_type: Endpoint type
* @param mps: Endpoint max packet size
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_OpenPipe(USBH_HandleTypeDef *phost, uint8_t pipe_num, uint8_t epnum,
uint8_t dev_address, uint8_t speed, uint8_t ep_type, uint16_t mps)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_HC_Init(phost->pData, pipe_num, epnum,
dev_address, speed, ep_type, mps);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Close a pipe of the low level driver.
* @param phost: Host handle
* @param pipe: Pipe index
* @retval USBH status
*/
USBH_StatusTypeDef USBH_LL_ClosePipe(USBH_HandleTypeDef *phost, uint8_t pipe)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_HC_Halt(phost->pData, pipe);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Submit a new URB to the low level driver.
* @param phost: Host handle
* @param pipe: Pipe index
* This parameter can be a value from 1 to 15
* @param direction : Channel number
* This parameter can be one of the these values:
* 0 : Output
* 1 : Input
* @param ep_type : Endpoint Type
* This parameter can be one of the these values:
* @arg EP_TYPE_CTRL: Control type
* @arg EP_TYPE_ISOC: Isochrounous type
* @arg EP_TYPE_BULK: Bulk type
* @arg EP_TYPE_INTR: Interrupt type
* @param token : Endpoint Type
* This parameter can be one of the these values:
* @arg 0: PID_SETUP
* @arg 1: PID_DATA
* @param pbuff : pointer to URB data
* @param length : Length of URB data
* @param do_ping : activate do ping protocol (for high speed only)
* This parameter can be one of the these values:
* 0 : do ping inactive
* 1 : do ping active
* @retval Status
*/
USBH_StatusTypeDef USBH_LL_SubmitURB(USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t direction,
uint8_t ep_type, uint8_t token, uint8_t *pbuff, uint16_t length,
uint8_t do_ping)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBH_StatusTypeDef usb_status = USBH_OK;
hal_status = HAL_HCD_HC_SubmitRequest(phost->pData, pipe, direction ,
ep_type, token, pbuff, length,
do_ping);
usb_status = USBH_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Get a URB state from the low level driver.
* @param phost: Host handle
* @param pipe: Pipe index
* This parameter can be a value from 1 to 15
* @retval URB state
* This parameter can be one of the these values:
* @arg URB_IDLE
* @arg URB_DONE
* @arg URB_NOTREADY
* @arg URB_NYET
* @arg URB_ERROR
* @arg URB_STALL
*/
USBH_URBStateTypeDef USBH_LL_GetURBState(USBH_HandleTypeDef *phost, uint8_t pipe)
{
return (USBH_URBStateTypeDef)HAL_HCD_HC_GetURBState (phost->pData, pipe);
}
/**
* @brief Drive VBUS.
* @param phost: Host handle
* @param state : VBUS state
* This parameter can be one of the these values:
* 0 : VBUS Inactive
* 1 : VBUS Active
* @retval Status
*/
USBH_StatusTypeDef USBH_LL_DriverVBUS(USBH_HandleTypeDef *phost, uint8_t state)
{
if (phost->id == HOST_FS) {
MX_DriverVbusFS(state);
}
/* USER CODE BEGIN 0 */
/* USER CODE END 0*/
HAL_Delay(200);
return USBH_OK;
}
/**
* @brief Set toggle for a pipe.
* @param phost: Host handle
* @param pipe: Pipe index
* @param toggle: toggle (0/1)
* @retval Status
*/
USBH_StatusTypeDef USBH_LL_SetToggle(USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t toggle)
{
HCD_HandleTypeDef *pHandle;
pHandle = phost->pData;
if(pHandle->hc[pipe].ep_is_in)
{
pHandle->hc[pipe].toggle_in = toggle;
}
else
{
pHandle->hc[pipe].toggle_out = toggle;
}
return USBH_OK;
}
/**
* @brief Return the current toggle of a pipe.
* @param phost: Host handle
* @param pipe: Pipe index
* @retval toggle (0/1)
*/
uint8_t USBH_LL_GetToggle(USBH_HandleTypeDef *phost, uint8_t pipe)
{
uint8_t toggle = 0;
HCD_HandleTypeDef *pHandle;
pHandle = phost->pData;
if(pHandle->hc[pipe].ep_is_in)
{
toggle = pHandle->hc[pipe].toggle_in;
}
else
{
toggle = pHandle->hc[pipe].toggle_out;
}
return toggle;
}
/**
* @brief Delay routine for the USB Host Library
* @param Delay: Delay in ms
* @retval None
*/
void USBH_Delay(uint32_t Delay)
{
HAL_Delay(Delay);
}
/**
* @brief Returns the USB status depending on the HAL status:
* @param hal_status: HAL status
* @retval USB status
*/
USBH_StatusTypeDef USBH_Get_USB_Status(HAL_StatusTypeDef hal_status)
{
USBH_StatusTypeDef usb_status = USBH_OK;
switch (hal_status)
{
case HAL_OK :
usb_status = USBH_OK;
break;
case HAL_ERROR :
usb_status = USBH_FAIL;
break;
case HAL_BUSY :
usb_status = USBH_BUSY;
break;
case HAL_TIMEOUT :
usb_status = USBH_FAIL;
break;
default :
usb_status = USBH_FAIL;
break;
}
return usb_status;
}