Template project for running EEZ Flow firmware project using STM32F469I-DISCO development board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

353 lines
10 KiB

/* USER CODE BEGIN Header */
/**
******************************************************************************
* File Name : FMC.c
* Description : This file provides code for the configuration
* of the FMC peripheral.
******************************************************************************
* @attention
*
* Copyright (c) 2022 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "fmc.h"
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
SDRAM_HandleTypeDef hsdram1;
/* FMC initialization function */
void MX_FMC_Init(void)
{
/* USER CODE BEGIN FMC_Init 0 */
/* USER CODE END FMC_Init 0 */
FMC_SDRAM_TimingTypeDef SdramTiming = {0};
/* USER CODE BEGIN FMC_Init 1 */
/* USER CODE END FMC_Init 1 */
/** Perform the SDRAM1 memory initialization sequence
*/
hsdram1.Instance = FMC_SDRAM_DEVICE;
/* hsdram1.Init */
hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32;
hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3;
hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
/* SdramTiming */
SdramTiming.LoadToActiveDelay = 2;
SdramTiming.ExitSelfRefreshDelay = 7;
SdramTiming.SelfRefreshTime = 4;
SdramTiming.RowCycleDelay = 7;
SdramTiming.WriteRecoveryTime = 3;
SdramTiming.RPDelay = 2;
SdramTiming.RCDDelay = 2;
if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK)
{
Error_Handler( );
}
/* USER CODE BEGIN FMC_Init 2 */
/* USER CODE END FMC_Init 2 */
}
static uint32_t FMC_Initialized = 0;
static void HAL_FMC_MspInit(void){
/* USER CODE BEGIN FMC_MspInit 0 */
/* USER CODE END FMC_MspInit 0 */
GPIO_InitTypeDef GPIO_InitStruct = {0};
if (FMC_Initialized) {
return;
}
FMC_Initialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_ENABLE();
/** FMC GPIO Configuration
PE1 ------> FMC_NBL1
PE0 ------> FMC_NBL0
PG15 ------> FMC_SDNCAS
PD0 ------> FMC_D2
PI4 ------> FMC_NBL2
PD1 ------> FMC_D3
PI3 ------> FMC_D27
PI2 ------> FMC_D26
PF0 ------> FMC_A0
PI5 ------> FMC_NBL3
PI7 ------> FMC_D29
PI10 ------> FMC_D31
PI6 ------> FMC_D28
PH15 ------> FMC_D23
PI1 ------> FMC_D25
PF1 ------> FMC_A1
PI9 ------> FMC_D30
PH13 ------> FMC_D21
PH14 ------> FMC_D22
PI0 ------> FMC_D24
PF2 ------> FMC_A2
PF3 ------> FMC_A3
PG8 ------> FMC_SDCLK
PF4 ------> FMC_A4
PH3 ------> FMC_SDNE0
PF5 ------> FMC_A5
PH2 ------> FMC_SDCKE0
PD15 ------> FMC_D1
PD10 ------> FMC_D15
PD14 ------> FMC_D0
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PC0 ------> FMC_SDNWE
PF12 ------> FMC_A6
PG1 ------> FMC_A11
PF15 ------> FMC_A9
PH12 ------> FMC_D20
PF13 ------> FMC_A7
PG0 ------> FMC_A10
PE8 ------> FMC_D5
PG5 ------> FMC_BA1
PG4 ------> FMC_BA0
PH9 ------> FMC_D17
PH11 ------> FMC_D19
PF14 ------> FMC_A8
PF11 ------> FMC_SDNRAS
PE9 ------> FMC_D6
PE11 ------> FMC_D8
PE14 ------> FMC_D11
PH8 ------> FMC_D16
PH10 ------> FMC_D18
PE7 ------> FMC_D4
PE10 ------> FMC_D7
PE12 ------> FMC_D9
PE15 ------> FMC_D12
PE13 ------> FMC_D10
*/
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = FMC_NBL1_Pin|FMC_NBL0_Pin|D5_Pin|D6_Pin
|D8_Pin|D11_Pin|D4_Pin|D7_Pin
|D9_Pin|D12_Pin|D10_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = SDNCAS_Pin|SDCLK_Pin|A11_Pin|A10_Pin
|GPIO_PIN_5|GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = D2_Pin|D3_Pin|D1_Pin|D15_Pin
|D0_Pin|D14_Pin|D13_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = FMC_NBL2_Pin|D27_Pin|D26_Pin|FMC_NBL3_Pin
|D29_Pin|D31_Pin|D28_Pin|D25_Pin
|D30_Pin|D24_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = A0_Pin|A1_Pin|A2_Pin|A3_Pin
|A4_Pin|A5_Pin|A6_Pin|A9_Pin
|A7_Pin|A8_Pin|SDNMT48LC4M32B2B5_6A_RAS_RAS___Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = D23_Pin|D21_Pin|D22_Pin|SDNE0_Pin
|SDCKE0_Pin|D20_Pin|D17_Pin|D19_Pin
|D16_Pin|D18_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
/* GPIO_InitStruct */
GPIO_InitStruct.Pin = SDNWE_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(SDNWE_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN FMC_MspInit 1 */
/* USER CODE END FMC_MspInit 1 */
}
void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* sdramHandle){
/* USER CODE BEGIN SDRAM_MspInit 0 */
/* USER CODE END SDRAM_MspInit 0 */
HAL_FMC_MspInit();
/* USER CODE BEGIN SDRAM_MspInit 1 */
/* USER CODE END SDRAM_MspInit 1 */
}
static uint32_t FMC_DeInitialized = 0;
static void HAL_FMC_MspDeInit(void){
/* USER CODE BEGIN FMC_MspDeInit 0 */
/* USER CODE END FMC_MspDeInit 0 */
if (FMC_DeInitialized) {
return;
}
FMC_DeInitialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_DISABLE();
/** FMC GPIO Configuration
PE1 ------> FMC_NBL1
PE0 ------> FMC_NBL0
PG15 ------> FMC_SDNCAS
PD0 ------> FMC_D2
PI4 ------> FMC_NBL2
PD1 ------> FMC_D3
PI3 ------> FMC_D27
PI2 ------> FMC_D26
PF0 ------> FMC_A0
PI5 ------> FMC_NBL3
PI7 ------> FMC_D29
PI10 ------> FMC_D31
PI6 ------> FMC_D28
PH15 ------> FMC_D23
PI1 ------> FMC_D25
PF1 ------> FMC_A1
PI9 ------> FMC_D30
PH13 ------> FMC_D21
PH14 ------> FMC_D22
PI0 ------> FMC_D24
PF2 ------> FMC_A2
PF3 ------> FMC_A3
PG8 ------> FMC_SDCLK
PF4 ------> FMC_A4
PH3 ------> FMC_SDNE0
PF5 ------> FMC_A5
PH2 ------> FMC_SDCKE0
PD15 ------> FMC_D1
PD10 ------> FMC_D15
PD14 ------> FMC_D0
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PC0 ------> FMC_SDNWE
PF12 ------> FMC_A6
PG1 ------> FMC_A11
PF15 ------> FMC_A9
PH12 ------> FMC_D20
PF13 ------> FMC_A7
PG0 ------> FMC_A10
PE8 ------> FMC_D5
PG5 ------> FMC_BA1
PG4 ------> FMC_BA0
PH9 ------> FMC_D17
PH11 ------> FMC_D19
PF14 ------> FMC_A8
PF11 ------> FMC_SDNRAS
PE9 ------> FMC_D6
PE11 ------> FMC_D8
PE14 ------> FMC_D11
PH8 ------> FMC_D16
PH10 ------> FMC_D18
PE7 ------> FMC_D4
PE10 ------> FMC_D7
PE12 ------> FMC_D9
PE15 ------> FMC_D12
PE13 ------> FMC_D10
*/
HAL_GPIO_DeInit(GPIOE, FMC_NBL1_Pin|FMC_NBL0_Pin|D5_Pin|D6_Pin
|D8_Pin|D11_Pin|D4_Pin|D7_Pin
|D9_Pin|D12_Pin|D10_Pin);
HAL_GPIO_DeInit(GPIOG, SDNCAS_Pin|SDCLK_Pin|A11_Pin|A10_Pin
|GPIO_PIN_5|GPIO_PIN_4);
HAL_GPIO_DeInit(GPIOD, D2_Pin|D3_Pin|D1_Pin|D15_Pin
|D0_Pin|D14_Pin|D13_Pin);
HAL_GPIO_DeInit(GPIOI, FMC_NBL2_Pin|D27_Pin|D26_Pin|FMC_NBL3_Pin
|D29_Pin|D31_Pin|D28_Pin|D25_Pin
|D30_Pin|D24_Pin);
HAL_GPIO_DeInit(GPIOF, A0_Pin|A1_Pin|A2_Pin|A3_Pin
|A4_Pin|A5_Pin|A6_Pin|A9_Pin
|A7_Pin|A8_Pin|SDNMT48LC4M32B2B5_6A_RAS_RAS___Pin);
HAL_GPIO_DeInit(GPIOH, D23_Pin|D21_Pin|D22_Pin|SDNE0_Pin
|SDCKE0_Pin|D20_Pin|D17_Pin|D19_Pin
|D16_Pin|D18_Pin);
HAL_GPIO_DeInit(SDNWE_GPIO_Port, SDNWE_Pin);
/* USER CODE BEGIN FMC_MspDeInit 1 */
/* USER CODE END FMC_MspDeInit 1 */
}
void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* sdramHandle){
/* USER CODE BEGIN SDRAM_MspDeInit 0 */
/* USER CODE END SDRAM_MspDeInit 0 */
HAL_FMC_MspDeInit();
/* USER CODE BEGIN SDRAM_MspDeInit 1 */
/* USER CODE END SDRAM_MspDeInit 1 */
}
/**
* @}
*/
/**
* @}
*/