mvladic
/
eez-flow-template-stm32f469i-disco
mirror of https://github.com/eez-open/eez-flow-template-stm32f469i-disco
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
Template project for running EEZ Flow firmware project using STM32F469I-DISCO development board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
19 Commits
1 Branch
0 Tags
11 MiB
 
 
 
 
 
 
Tree: 83ab6d127b
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '83ab6d127b'
${ noResults }
eez-flow-template-stm32f469.../Drivers/BSP/STM32469I-Discovery/stm32469i_discovery.c

943 lines
28 KiB
Raw Blame History

/**
******************************************************************************
* @file stm32469i_discovery.c
* @author MCD Application Team
* @brief This file provides a set of firmware functions to manage LEDs,
* push-buttons, external SDRAM, external QSPI Flash, RF EEPROM,
* available on STM32469I-Discovery
* board (MB1189) RevA/B/C from STMicroelectronics.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32469i_discovery.h"
/** @defgroup BSP BSP
* @{
*/
/** @defgroup STM32469I_Discovery STM32469I Discovery
* @{
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL STM32469I Discovery LOW LEVEL
* @{
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Private_TypesDefinitions STM32469I Discovery LOW LEVEL Private TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Private_Defines STM32469I Discovery LOW LEVEL Private Defines
* @{
*/
/**
* @brief STM32469I Discovery BSP Driver version number V2.1.1
*/
#define __STM32469I_DISCOVERY_BSP_VERSION_MAIN (0x02) /*!< [31:24] main version */
#define __STM32469I_DISCOVERY_BSP_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
#define __STM32469I_DISCOVERY_BSP_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
#define __STM32469I_DISCOVERY_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32469I_DISCOVERY_BSP_VERSION ((__STM32469I_DISCOVERY_BSP_VERSION_MAIN << 24)\
|(__STM32469I_DISCOVERY_BSP_VERSION_SUB1 << 16)\
|(__STM32469I_DISCOVERY_BSP_VERSION_SUB2 << 8 )\
|(__STM32469I_DISCOVERY_BSP_VERSION_RC))
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Private_Macros STM32469I Discovery LOW LEVEL Private Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Private_Variables STM32469I Discovery LOW LEVEL Private Variables
* @{
*/
uint32_t GPIO_PIN[LEDn] = {LED1_PIN,
LED2_PIN,
LED3_PIN,
LED4_PIN};
GPIO_TypeDef* GPIO_PORT[LEDn] = {LED1_GPIO_PORT,
LED2_GPIO_PORT,
LED3_GPIO_PORT,
LED4_GPIO_PORT};
GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {WAKEUP_BUTTON_GPIO_PORT };
const uint16_t BUTTON_PIN[BUTTONn] = {WAKEUP_BUTTON_PIN };
const uint16_t BUTTON_IRQn[BUTTONn] = {WAKEUP_BUTTON_EXTI_IRQn };
static I2C_HandleTypeDef heval_I2c1;
static I2C_HandleTypeDef heval_I2c2;
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Private_FunctionPrototypes STM32469I Discovery LOW LEVEL Private FunctionPrototypes
* @{
*/
static void I2C1_MspInit(void);
static void I2C2_MspInit(void);
static void I2C1_Init(void);
static void I2C2_Init(void);
#if defined(USE_IOEXPANDER)
static void I2C1_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
static uint8_t I2C1_Read(uint8_t Addr, uint8_t Reg);
#endif /* USE_IOEXPANDER */
static HAL_StatusTypeDef I2C1_ReadMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef I2C2_ReadMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef I2C1_WriteMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef I2C2_WriteMultiple(uint8_t Addr, uint16_t Reg, uint16_t MemAddSize, uint8_t *Buffer, uint16_t Length);
static HAL_StatusTypeDef I2C1_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
static void I2C1_Error(uint8_t Addr);
static void I2C2_Error(uint8_t Addr);
/* AUDIO IO functions */
void AUDIO_IO_Init(void);
void AUDIO_IO_DeInit(void);
void AUDIO_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
uint8_t AUDIO_IO_Read(uint8_t Addr, uint8_t Reg);
void AUDIO_IO_Delay(uint32_t Delay);
/* I2C EEPROM IO function */
void EEPROM_IO_Init(void);
HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
/* TouchScreen (TS) IO functions */
void TS_IO_Init(void);
void TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
uint8_t TS_IO_Read(uint8_t Addr, uint8_t Reg);
uint16_t TS_IO_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
void TS_IO_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
void TS_IO_Delay(uint32_t Delay);
void OTM8009A_IO_Delay(uint32_t Delay);
void NT35510_IO_Delay(uint32_t Delay);
/**
* @}
*/
/** @defgroup STM32469I_Discovery_BSP_Public_Functions STM32469I Discovery BSP Public Functions
* @{
*/
/**
* @brief This method returns the STM32469I Discovery BSP Driver revision
* @retval version: 0xXYZR (8bits for each decimal, R for RC)
*/
uint32_t BSP_GetVersion(void)
{
return __STM32469I_DISCOVERY_BSP_VERSION;
}
/**
* @brief Configures LED GPIO.
* @param Led: LED to be configured.
* This parameter can be one of the following values:
* @arg LED1
* @arg LED2
* @arg LED3
* @arg LED4
*/
void BSP_LED_Init(Led_TypeDef Led)
{
GPIO_InitTypeDef gpio_init_structure;
if (Led <= LED4)
{
/* Configure the GPIO_LED pin */
gpio_init_structure.Pin = GPIO_PIN[Led];
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_PP;
gpio_init_structure.Pull = GPIO_PULLUP;
gpio_init_structure.Speed = GPIO_SPEED_HIGH;
switch(Led)
{
case LED1 :
LED1_GPIO_CLK_ENABLE();
break;
case LED2 :
LED2_GPIO_CLK_ENABLE();
break;
case LED3 :
LED3_GPIO_CLK_ENABLE();
break;
case LED4 :
LED4_GPIO_CLK_ENABLE();
break;
default :
break;
} /* end switch */
HAL_GPIO_Init(GPIO_PORT[Led], &gpio_init_structure);
/* By default, turn off LED by setting a high level on corresponding GPIO */
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET);
} /* of if (Led <= LED4) */
}
/**
* @brief DeInit LEDs.
* @param Led: LED to be configured.
* This parameter can be one of the following values:
* @arg LED1
* @arg LED2
* @arg LED3
* @arg LED4
* @note Led DeInit does not disable the GPIO clock nor disable the Mfx
*/
void BSP_LED_DeInit(Led_TypeDef Led)
{
GPIO_InitTypeDef gpio_init_structure;
if (Led <= LED4)
{
/* DeInit the GPIO_LED pin */
gpio_init_structure.Pin = GPIO_PIN[Led];
/* Turn off LED */
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET);
HAL_GPIO_DeInit(GPIO_PORT[Led], gpio_init_structure.Pin);
}
}
/**
* @brief Turns selected LED On.
* @param Led: LED to be set on
* This parameter can be one of the following values:
* @arg LED1
* @arg LED2
* @arg LED3
* @arg LED4
*/
void BSP_LED_On(Led_TypeDef Led)
{
if (Led <= LED4)
{
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_RESET);
}
}
/**
* @brief Turns selected LED Off.
* @param Led: LED to be set off
* This parameter can be one of the following values:
* @arg LED1
* @arg LED2
* @arg LED3
* @arg LED4
*/
void BSP_LED_Off(Led_TypeDef Led)
{
if (Led <= LED4)
{
HAL_GPIO_WritePin(GPIO_PORT[Led], GPIO_PIN[Led], GPIO_PIN_SET);
}
}
/**
* @brief Toggles the selected LED.
* @param Led: LED to be toggled
* This parameter can be one of the following values:
* @arg LED1
* @arg LED2
* @arg LED3
* @arg LED4
*/
void BSP_LED_Toggle(Led_TypeDef Led)
{
if (Led <= LED4)
{
HAL_GPIO_TogglePin(GPIO_PORT[Led], GPIO_PIN[Led]);
}
}
/**
* @brief Configures button GPIO and EXTI Line.
* @param Button: Button to be configured
* This parameter can be one of the following values:
* @arg BUTTON_WAKEUP: Wakeup Push Button
* @arg BUTTON_USER: User Push Button
* @param Button_Mode: Button mode
* This parameter can be one of the following values:
* @arg BUTTON_MODE_GPIO: Button will be used as simple IO
* @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line
* with interrupt generation capability
*/
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
{
GPIO_InitTypeDef gpio_init_structure;
/* Enable the BUTTON clock */
BUTTON_GPIO_CLK_ENABLE();
if(Button_Mode == BUTTON_MODE_GPIO)
{
/* Configure Button pin as input */
gpio_init_structure.Pin = BUTTON_PIN[Button];
gpio_init_structure.Mode = GPIO_MODE_INPUT;
gpio_init_structure.Pull = GPIO_NOPULL;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);
}
if(Button_Mode == BUTTON_MODE_EXTI)
{
/* Configure Button pin as input with External interrupt */
gpio_init_structure.Pin = BUTTON_PIN[Button];
gpio_init_structure.Pull = GPIO_NOPULL;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
gpio_init_structure.Mode = GPIO_MODE_IT_RISING;
HAL_GPIO_Init(BUTTON_PORT[Button], &gpio_init_structure);
/* Enable and set Button EXTI Interrupt to the lowest priority */
HAL_NVIC_SetPriority((IRQn_Type)(BUTTON_IRQn[Button]), 0x0F, 0x00);
HAL_NVIC_EnableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
}
}
/**
* @brief Push Button DeInit.
* @param Button: Button to be configured
* This parameter can be one of the following values:
* @arg BUTTON_WAKEUP: Wakeup Push Button
* @arg BUTTON_USER: User Push Button
* @note PB DeInit does not disable the GPIO clock
*/
void BSP_PB_DeInit(Button_TypeDef Button)
{
GPIO_InitTypeDef gpio_init_structure;
gpio_init_structure.Pin = BUTTON_PIN[Button];
HAL_NVIC_DisableIRQ((IRQn_Type)(BUTTON_IRQn[Button]));
HAL_GPIO_DeInit(BUTTON_PORT[Button], gpio_init_structure.Pin);
}
/**
* @brief Returns the selected button state.
* @param Button: Button to be checked
* This parameter can be one of the following values:
* @arg BUTTON_WAKEUP: Wakeup Push Button
* @arg BUTTON_USER: User Push Button
* @retval The Button GPIO pin value
*/
uint32_t BSP_PB_GetState(Button_TypeDef Button)
{
return HAL_GPIO_ReadPin(BUTTON_PORT[Button], BUTTON_PIN[Button]);
}
/**
* @}
*/
/** @defgroup STM32469I_Discovery_LOW_LEVEL_Private_Functions STM32469I Discovery LOW LEVEL Private Functions
* @{
*/
/*******************************************************************************
BUS OPERATIONS
*******************************************************************************/
/******************************* I2C Routines *********************************/
/**
* @brief Initializes I2C MSP.
*/
static void I2C1_MspInit(void)
{
GPIO_InitTypeDef gpio_init_structure;
/*** Configure the GPIOs ***/
/* Enable GPIO clock */
DISCO_I2C1_SCL_SDA_GPIO_CLK_ENABLE();
#if defined(USE_STM32469I_DISCO_REVC)
/* Perform 10 pulses on SCL to unlock I2C devices if previous I2C transaction aborted.*/
/* This configuration is needed with STM32F469i Disco RevC when using touch screen controller FT6336U */
gpio_init_structure.Pin = DISCO_I2C1_SCL_PIN;
gpio_init_structure.Mode = GPIO_MODE_OUTPUT_OD;
gpio_init_structure.Pull = GPIO_NOPULL;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
gpio_init_structure.Alternate = 0;
HAL_GPIO_Init( DISCO_I2C1_SCL_SDA_GPIO_PORT, &gpio_init_structure );
for(uint8_t count = 10; count > 0; count-- )
{
HAL_GPIO_WritePin( DISCO_I2C1_SCL_SDA_GPIO_PORT, DISCO_I2C1_SCL_PIN, GPIO_PIN_SET );
HAL_Delay(1);
HAL_GPIO_WritePin( DISCO_I2C1_SCL_SDA_GPIO_PORT, DISCO_I2C1_SCL_PIN, GPIO_PIN_RESET );
HAL_Delay(1);
}
#endif /* USE_STM32469I_DISCO_REVC */
/* Configure I2C Tx as alternate function */
gpio_init_structure.Pin = DISCO_I2C1_SCL_PIN;
gpio_init_structure.Mode = GPIO_MODE_AF_OD;
gpio_init_structure.Pull = GPIO_NOPULL;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
gpio_init_structure.Alternate = DISCO_I2C1_SCL_SDA_AF;
HAL_GPIO_Init(DISCO_I2C1_SCL_SDA_GPIO_PORT, &gpio_init_structure);
/* Configure I2C Rx as alternate function */
gpio_init_structure.Pin = DISCO_I2C1_SDA_PIN;
HAL_GPIO_Init(DISCO_I2C1_SCL_SDA_GPIO_PORT, &gpio_init_structure);
/*** Configure the I2C peripheral ***/
/* Enable I2C clock */
DISCO_I2C1_CLK_ENABLE();
/* Force the I2C peripheral clock reset */
DISCO_I2C1_FORCE_RESET();
/* Release the I2C peripheral clock reset */
DISCO_I2C1_RELEASE_RESET();
/* Enable and set I2C1 Interrupt to a lower priority */
HAL_NVIC_SetPriority(DISCO_I2C1_EV_IRQn, 0x05, 0);
HAL_NVIC_EnableIRQ(DISCO_I2C1_EV_IRQn);
/* Enable and set I2C1 Interrupt to a lower priority */
HAL_NVIC_SetPriority(DISCO_I2C1_ER_IRQn, 0x05, 0);
HAL_NVIC_EnableIRQ(DISCO_I2C1_ER_IRQn);
}
/**
* @brief Initializes I2C MSP.
*/
static void I2C2_MspInit(void)
{
GPIO_InitTypeDef gpio_init_structure;
/*** Configure the GPIOs ***/
/* Enable GPIO clock */
DISCO_I2C2_SCL_SDA_GPIO_CLK_ENABLE();
/* Configure I2C Tx as alternate function */
gpio_init_structure.Pin = DISCO_I2C2_SCL_PIN;
gpio_init_structure.Mode = GPIO_MODE_AF_OD;
gpio_init_structure.Pull = GPIO_NOPULL;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
gpio_init_structure.Alternate = DISCO_I2C2_SCL_SDA_AF;
HAL_GPIO_Init(DISCO_I2C2_SCL_SDA_GPIO_PORT, &gpio_init_structure);
/* Configure I2C Rx as alternate function */
gpio_init_structure.Pin = DISCO_I2C2_SDA_PIN;
HAL_GPIO_Init(DISCO_I2C2_SCL_SDA_GPIO_PORT, &gpio_init_structure);
/*** Configure the I2C peripheral ***/
/* Enable I2C clock */
DISCO_I2C2_CLK_ENABLE();
/* Force the I2C peripheral clock reset */
DISCO_I2C2_FORCE_RESET();
/* Release the I2C peripheral clock reset */
DISCO_I2C2_RELEASE_RESET();
/* Enable and set I2C1 Interrupt to a lower priority */
HAL_NVIC_SetPriority(DISCO_I2C2_EV_IRQn, 0x05, 0);
HAL_NVIC_EnableIRQ(DISCO_I2C2_EV_IRQn);
/* Enable and set I2C1 Interrupt to a lower priority */
HAL_NVIC_SetPriority(DISCO_I2C2_ER_IRQn, 0x05, 0);
HAL_NVIC_EnableIRQ(DISCO_I2C2_ER_IRQn);
}
/**
* @brief Initializes I2C HAL.
*/
static void I2C1_Init(void)
{
if(HAL_I2C_GetState(&heval_I2c1) == HAL_I2C_STATE_RESET)
{
heval_I2c1.Instance = I2C1;
heval_I2c1.Init.ClockSpeed = I2C1_SCL_FREQ_KHZ;
heval_I2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
heval_I2c1.Init.OwnAddress1 = 0;
heval_I2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
heval_I2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
heval_I2c1.Init.OwnAddress2 = 0;
heval_I2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
heval_I2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
/* Init the I2C */
I2C1_MspInit();
HAL_I2C_Init(&heval_I2c1);
}
}
/**
* @brief Initializes I2C HAL.
*/
static void I2C2_Init(void)
{
if(HAL_I2C_GetState(&heval_I2c2) == HAL_I2C_STATE_RESET)
{
heval_I2c2.Instance = I2C2;
heval_I2c2.Init.ClockSpeed = I2C2_SCL_FREQ_KHZ;
heval_I2c2.Init.DutyCycle = I2C_DUTYCYCLE_2;
heval_I2c2.Init.OwnAddress1 = 0;
heval_I2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
heval_I2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
heval_I2c2.Init.OwnAddress2 = 0;
heval_I2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
heval_I2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
/* Init the I2C */
I2C2_MspInit();
HAL_I2C_Init(&heval_I2c2);
}
}
/**
* @brief Writes a single data.
* @param Addr: I2C address
* @param Reg: Register address
* @param Value: Data to be written
*/
static void I2C1_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
HAL_StatusTypeDef status = HAL_OK;
status = HAL_I2C_Mem_Write(&heval_I2c1,
Addr,
(uint16_t)Reg,
I2C_MEMADD_SIZE_8BIT,
&Value,
1,
100);
/* Check the communication status */
if(status != HAL_OK)
{
/* Execute user timeout callback */
I2C1_Error(Addr);
}
}
/**
* @brief Reads a single data.
* @param Addr: I2C address
* @param Reg: Register address
* @retval Read data
*/
static uint8_t I2C1_Read(uint8_t Addr, uint8_t Reg)
{
HAL_StatusTypeDef status = HAL_OK;
uint8_t Value = 0;
status = HAL_I2C_Mem_Read(&heval_I2c1,
Addr,
Reg,
I2C_MEMADD_SIZE_8BIT,
&Value,
1,
1000);
/* Check the communication status */
if(status != HAL_OK)
{
/* Execute user timeout callback */
I2C1_Error(Addr);
}
return Value;
}
/**
* @brief Reads multiple data.
* @param Addr: I2C address
* @param Reg: Reg address
* @param MemAddress: memory address
* @param Buffer: Pointer to data buffer
* @param Length: Length of the data
* @retval HAL status
*/
static HAL_StatusTypeDef I2C1_ReadMultiple(uint8_t Addr,
uint16_t Reg,
uint16_t MemAddress,
uint8_t *Buffer,
uint16_t Length)
{
HAL_StatusTypeDef status = HAL_OK;
status = HAL_I2C_Mem_Read(&heval_I2c1,
Addr,
(uint16_t)Reg,
MemAddress,
Buffer,
Length,
1000);
/* Check the communication status */
if(status != HAL_OK)
{
/* I2C error occured */
I2C1_Error(Addr);
}
return status;
}
static HAL_StatusTypeDef I2C2_ReadMultiple(uint8_t Addr,
uint16_t Reg,
uint16_t MemAddress,
uint8_t *Buffer,
uint16_t Length)
{
HAL_StatusTypeDef status = HAL_OK;
status = HAL_I2C_Mem_Read(&heval_I2c2,
Addr,
(uint16_t)Reg,
MemAddress,
Buffer,
Length,
1000);
/* Check the communication status */
if(status != HAL_OK)
{
/* I2C2 error occured */
I2C2_Error(Addr);
}
return status;
}
/**
* @brief Writes a value in a register of the device through BUS in using DMA mode.
* @param Addr: Device address on BUS Bus.
* @param Reg: The target register address to write
* @param MemAddress: memory address
* @param Buffer: The target register value to be written
* @param Length: buffer size to be written
* @retval HAL status
*/
static HAL_StatusTypeDef I2C1_WriteMultiple(uint8_t Addr,
uint16_t Reg,
uint16_t MemAddress,
uint8_t *Buffer,
uint16_t Length)
{
HAL_StatusTypeDef status = HAL_OK;
status = HAL_I2C_Mem_Write(&heval_I2c1,
Addr,
(uint16_t)Reg,
MemAddress,
Buffer,
Length,
1000);
/* Check the communication status */
if(status != HAL_OK)
{
/* Re-Initiaize the I2C Bus */
I2C1_Error(Addr);
}
return status;
}
static HAL_StatusTypeDef I2C2_WriteMultiple(uint8_t Addr,
uint16_t Reg,
uint16_t MemAddress,
uint8_t *Buffer,
uint16_t Length)
{
HAL_StatusTypeDef status = HAL_OK;
status = HAL_I2C_Mem_Write(&heval_I2c2,
Addr,
(uint16_t)Reg,
MemAddress,
Buffer,
Length,
1000);
/* Check the communication status */
if(status != HAL_OK)
{
/* Re-Initiaize the I2C2 Bus */
I2C2_Error(Addr);
}
return status;
}
/**
* @brief Checks if target device is ready for communication.
* @note This function is used with Memory devices
* @param DevAddress: Target device address
* @param Trials: Number of trials
* @retval HAL status
*/
static HAL_StatusTypeDef I2C1_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{
return (HAL_I2C_IsDeviceReady(&heval_I2c1, DevAddress, Trials, 1000));
}
/**
* @brief Manages error callback by re-initializing I2C.
* @param Addr: I2C Address
*/
static void I2C1_Error(uint8_t Addr)
{
/* De-initialize the I2C comunication bus */
HAL_I2C_DeInit(&heval_I2c1);
/* Re-Initiaize the I2C comunication bus */
I2C1_Init();
}
static void I2C2_Error(uint8_t Addr)
{
/* De-initialize the I2C2 comunication bus */
HAL_I2C_DeInit(&heval_I2c2);
/* Re-Initiaize the I2C2 comunication bus */
I2C2_Init();
}
/**
* @}
*/
/*******************************************************************************
LINK OPERATIONS
*******************************************************************************/
/********************************* LINK AUDIO *********************************/
/**
* @brief Initializes Audio low level.
*/
void AUDIO_IO_Init(void)
{
I2C2_Init();
}
/**
* @brief DeInitializes Audio low level.
*/
void AUDIO_IO_DeInit(void)
{
}
/**
* @brief Writes a single data.
* @param Addr: I2C address
* @param Reg: Reg address
* @param Value: Data to be written
*/
void AUDIO_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
I2C2_WriteMultiple(Addr, (uint16_t) Reg, I2C_MEMADD_SIZE_8BIT, (uint8_t*)&Value, 1);
}
/**
* @brief Reads a single data.
* @param Addr: I2C address
* @param Reg: Reg address
* @retval Data to be read
*/
uint8_t AUDIO_IO_Read(uint8_t Addr, uint8_t Reg)
{
uint8_t read_value = 0;
I2C2_ReadMultiple(Addr, (uint16_t) Reg, I2C_MEMADD_SIZE_8BIT, (uint8_t*)&read_value, 1);
return read_value;
}
/**
* @brief AUDIO Codec delay
* @param Delay: Delay in ms
*/
void AUDIO_IO_Delay(uint32_t Delay)
{
HAL_Delay(Delay);
}
/******************************** LINK I2C EEPROM *****************************/
/**
* @brief Initializes peripherals used by the I2C EEPROM driver.
*/
void EEPROM_IO_Init(void)
{
I2C1_Init();
}
/**
* @brief Write data to I2C EEPROM driver in using DMA channel.
* @param DevAddress: Target device address
* @param MemAddress: Internal memory address
* @param pBuffer: Pointer to data buffer
* @param BufferSize: Amount of data to be sent
* @retval HAL status
*/
HAL_StatusTypeDef EEPROM_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
{
return (I2C1_WriteMultiple(DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
}
/**
* @brief Read data from I2C EEPROM driver in using DMA channel.
* @param DevAddress: Target device address
* @param MemAddress: Internal memory address
* @param pBuffer: Pointer to data buffer
* @param BufferSize: Amount of data to be read
* @retval HAL status
*/
HAL_StatusTypeDef EEPROM_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize)
{
return (I2C1_ReadMultiple(DevAddress, MemAddress, I2C_MEMADD_SIZE_16BIT, pBuffer, BufferSize));
}
/**
* @brief Checks if target device is ready for communication.
* @note This function is used with Memory devices
* @param DevAddress: Target device address
* @param Trials: Number of trials
* @retval HAL status
*/
HAL_StatusTypeDef EEPROM_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
{
return (I2C1_IsDeviceReady(DevAddress, Trials));
}
/******************************** LINK TS (TouchScreen) ***********************/
/**
* @brief Initialize I2C communication
* channel from MCU to TouchScreen (TS).
*/
void TS_IO_Init(void)
{
I2C1_Init();
}
/**
* @brief Writes single data with I2C communication
* channel from MCU to TouchScreen.
* @param Addr: I2C address
* @param Reg: Register address
* @param Value: Data to be written
*/
void TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
{
I2C1_Write(Addr, Reg, Value);
}
/**
* @brief Reads single data with I2C communication
* channel from TouchScreen.
* @param Addr: I2C address
* @param Reg: Register address
* @retval Read data
*/
uint8_t TS_IO_Read(uint8_t Addr, uint8_t Reg)
{
return I2C1_Read(Addr, Reg);
}
/**
* @brief Reads multiple data with I2C communication
* channel from TouchScreen.
* @param Addr: I2C address
* @param Reg: Register address
* @param Buffer: Pointer to data buffer
* @param Length: Length of the data
* @retval Number of read data
*/
uint16_t TS_IO_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
{
return I2C1_ReadMultiple(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
}
/**
* @brief Writes multiple data with I2C communication
* channel from MCU to TouchScreen.
* @param Addr: I2C address
* @param Reg: Register address
* @param Buffer: Pointer to data buffer
* @param Length: Length of the data
*/
void TS_IO_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
{
I2C1_WriteMultiple(Addr, (uint16_t)Reg, I2C_MEMADD_SIZE_8BIT, Buffer, Length);
}
/**
* @brief Delay function used in TouchScreen low level driver.
* @param Delay: Delay in ms
*/
void TS_IO_Delay(uint32_t Delay)
{
HAL_Delay(Delay);
}
/**************************** LINK OTM8009A (Display driver) ******************/
/**
* @brief OTM8009A delay
* @param Delay: Delay in ms
*/
void OTM8009A_IO_Delay(uint32_t Delay)
{
HAL_Delay(Delay);
}
/**************************** LINK NT35510 (Display driver) ******************/
/**
* @brief NT35510 delay
* @param Delay: Delay in ms
*/
void NT35510_IO_Delay(uint32_t Delay)
{
HAL_Delay(Delay);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/