Template project for running EEZ Flow firmware project using STM32F469I-DISCO development board
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

249 lines
11 KiB

/**
******************************************************************************
* @file nt35510.h
* @author MCD Application Team
* @brief This file contains all the constants parameters for the NT35510
* which is the LCD Driver for Frida Techshine 3K138 (WVGA)
* DSI LCD Display.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __NT35510_H
#define __NT35510_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup nt35510
* @{
*/
/** @addtogroup NT35510_Exported_Variables
* @{
*/
#if defined ( __GNUC__ )
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#endif /* __GNUC__ */
/**
* @brief LCD_OrientationTypeDef
* Possible values of Display Orientation
*/
#define NT35510_ORIENTATION_PORTRAIT ((uint32_t)0x00) /* Portrait orientation choice of LCD screen */
#define NT35510_ORIENTATION_LANDSCAPE ((uint32_t)0x01) /* Landscape orientation choice of LCD screen */
/**
* @brief Possible values of
* pixel data format (ie color coding) transmitted on DSI Data lane in DSI packets
*/
#define NT35510_FORMAT_RGB888 ((uint32_t)0x00) /* Pixel format chosen is RGB888 : 24 bpp */
#define NT35510_FORMAT_RBG565 ((uint32_t)0x02) /* Pixel format chosen is RGB565 : 16 bpp */
/**
* @brief nt35510_480x800 Size
*/
/* Width and Height in Portrait mode */
#define NT35510_480X800_WIDTH ((uint16_t)480) /* LCD PIXEL WIDTH */
#define NT35510_480X800_HEIGHT ((uint16_t)800) /* LCD PIXEL HEIGHT */
/* Width and Height in Landscape mode */
#define NT35510_800X480_WIDTH ((uint16_t)800) /* LCD PIXEL WIDTH */
#define NT35510_800X480_HEIGHT ((uint16_t)480) /* LCD PIXEL HEIGHT */
/**
* @brief NT35510_480X800 Timing parameters for Portrait orientation mode
*/
#define NT35510_480X800_HSYNC ((uint16_t)2) /* Horizontal synchronization */
#define NT35510_480X800_HBP ((uint16_t)34) /* Horizontal back porch */
#define NT35510_480X800_HFP ((uint16_t)34) /* Horizontal front porch */
#define NT35510_480X800_VSYNC ((uint16_t)120) /* Vertical synchronization */
#define NT35510_480X800_VBP ((uint16_t)150) /* Vertical back porch */
#define NT35510_480X800_VFP ((uint16_t)150) /* Vertical front porch */
/**
* @brief NT35510_800X480 Timing parameters for Landscape orientation mode
* Same values as for Portrait mode in fact.
*/
#define NT35510_800X480_HSYNC NT35510_480X800_VSYNC /* Horizontal synchronization */
#define NT35510_800X480_HBP NT35510_480X800_VBP /* Horizontal back porch */
#define NT35510_800X480_HFP NT35510_480X800_VFP /* Horizontal front porch */
#define NT35510_800X480_VSYNC NT35510_480X800_HSYNC /* Vertical synchronization */
#define NT35510_800X480_VBP NT35510_480X800_HBP /* Vertical back porch */
#define NT35510_800X480_VFP NT35510_480X800_HFP /* Vertical front porch */
/* List of NT35510 used commands */
/* Detailed in NT35510 Data Sheet v0.80 */
/* Version of 10/28/2011 */
/* Command, NumberOfArguments */
#define NT35510_CMD_NOP 0x00 /* NOP */
#define NT35510_CMD_SWRESET 0x01 /* SW reset */
#define NT35510_CMD_RDDID 0x04 /* Read display ID */
#define NT35510_CMD_RDNUMED 0x05 /* Read number of errors on DSI */
#define NT35510_CMD_RDDPM 0x0A /* Read display power mode */
#define NT35510_CMD_RDDMADCTL 0x0B /* Read display MADCTL */
#define NT35510_CMD_RDDCOLMOD 0x0C /* Read display pixel format */
#define NT35510_CMD_RDDIM 0x0D /* Read display image mode */
#define NT35510_CMD_RDDSM 0x0E /* Read display signal mode */
#define NT35510_CMD_RDDSDR 0x0F /* Read display self-diagnostics result */
#define NT35510_CMD_SLPIN 0x10 /* Sleep in */
#define NT35510_CMD_SLPOUT 0x11 /* Sleep out */
#define NT35510_CMD_PTLON 0x12 /* Partial mode on */
#define NT35510_CMD_NORON 0x13 /* Normal display mode on */
#define NT35510_CMD_INVOFF 0x20 /* Display inversion off */
#define NT35510_CMD_INVON 0x21 /* Display inversion on */
#define NT35510_CMD_ALLPOFF 0x22 /* All pixel off */
#define NT35510_CMD_ALLPON 0x23 /* All pixel on */
#define NT35510_CMD_GAMSET 0x26 /* Gamma set */
#define NT35510_CMD_DISPOFF 0x28 /* Display off */
#define NT35510_CMD_DISPON 0x29 /* Display on */
#define NT35510_CMD_CASET 0x2A /* Column address set */
#define NT35510_CMD_RASET 0x2B /* Row address set */
#define NT35510_CMD_RAMWR 0x2C /* Memory write */
#define NT35510_CMD_RAMRD 0x2E /* Memory read */
#define NT35510_CMD_PLTAR 0x30 /* Partial area */
#define NT35510_CMD_TOPC 0x32 /* Turn On Peripheral Command */
#define NT35510_CMD_TEOFF 0x34 /* Tearing effect line off */
#define NT35510_CMD_TEEON 0x35 /* Tearing effect line on */
#define NT35510_CMD_MADCTL 0x36 /* Memory data access control */
#define NT35510_CMD_IDMOFF 0x38 /* Idle mode off */
#define NT35510_CMD_IDMON 0x39 /* Idle mode on */
#define NT35510_CMD_COLMOD 0x3A /* Interface pixel format */
#define NT35510_CMD_RAMWRC 0x3C /* Memory write continue */
#define NT35510_CMD_RAMRDC 0x3E /* Memory read continue */
#define NT35510_CMD_STESL 0x44 /* Set tearing effect scan line */
#define NT35510_CMD_GSL 0x45 /* Get scan line */
#define NT35510_CMD_DSTBON 0x4F /* Deep standby mode on */
#define NT35510_CMD_WRPFD 0x50 /* Write profile value for display */
#define NT35510_CMD_WRDISBV 0x51 /* Write display brightness */
#define NT35510_CMD_RDDISBV 0x52 /* Read display brightness */
#define NT35510_CMD_WRCTRLD 0x53 /* Write CTRL display */
#define NT35510_CMD_RDCTRLD 0x54 /* Read CTRL display value */
#define NT35510_CMD_WRCABC 0x55 /* Write content adaptative brightness control */
#define NT35510_CMD_RDCABC 0x56 /* Read content adaptive brightness control */
#define NT35510_CMD_WRHYSTE 0x57 /* Write hysteresis */
#define NT35510_CMD_WRGAMMSET 0x58 /* Write gamme setting */
#define NT35510_CMD_RDFSVM 0x5A /* Read FS value MSBs */
#define NT35510_CMD_RDFSVL 0x5B /* Read FS value LSBs */
#define NT35510_CMD_RDMFFSVM 0x5C /* Read median filter FS value MSBs */
#define NT35510_CMD_RDMFFSVL 0x5D /* Read median filter FS value LSBs */
#define NT35510_CMD_WRCABCMB 0x5E /* Write CABC minimum brightness */
#define NT35510_CMD_RDCABCMB 0x5F /* Read CABC minimum brightness */
#define NT35510_CMD_WRLSCC 0x65 /* Write light sensor compensation coefficient value */
#define NT35510_CMD_RDLSCCM 0x66 /* Read light sensor compensation coefficient value MSBs */
#define NT35510_CMD_RDLSCCL 0x67 /* Read light sensor compensation coefficient value LSBs */
#define NT35510_CMD_RDBWLB 0x70 /* Read black/white low bits */
#define NT35510_CMD_RDBKX 0x71 /* Read Bkx */
#define NT35510_CMD_RDBKY 0x72 /* Read Bky */
#define NT35510_CMD_RDWX 0x73 /* Read Wx */
#define NT35510_CMD_RDWY 0x74 /* Read Wy */
#define NT35510_CMD_RDRGLB 0x75 /* Read red/green low bits */
#define NT35510_CMD_RDRX 0x76 /* Read Rx */
#define NT35510_CMD_RDRY 0x77 /* Read Ry */
#define NT35510_CMD_RDGX 0x78 /* Read Gx */
#define NT35510_CMD_RDGY 0x79 /* Read Gy */
#define NT35510_CMD_RDBALB 0x7A /* Read blue/acolor low bits */
#define NT35510_CMD_RDBX 0x7B /* Read Bx */
#define NT35510_CMD_RDBY 0x7C /* Read By */
#define NT35510_CMD_RDAX 0x7D /* Read Ax */
#define NT35510_CMD_RDAY 0x7E /* Read Ay */
#define NT35510_CMD_RDDDBS 0xA1 /* Read DDB start */
#define NT35510_CMD_RDDDBC 0xA8 /* Read DDB continue */
#define NT35510_CMD_RDDCS 0xAA /* Read first checksum */
#define NT35510_CMD_RDCCS 0xAF /* Read continue checksum */
#define NT35510_CMD_RDID1 0xDA /* Read ID1 value */
#define NT35510_CMD_RDID2 0xDB /* Read ID2 value */
#define NT35510_CMD_RDID3 0xDC /* Read ID3 value */
/* Parameter TELOM : Tearing Effect Line Output Mode : possible values */
#define NT35510_TEEON_TELOM_VBLANKING_INFO_ONLY 0x00
#define NT35510_TEEON_TELOM_VBLANKING_AND_HBLANKING_INFO 0x01
/* Possible used values of MADCTR */
#define NT35510_MADCTR_MODE_PORTRAIT 0x00
#define NT35510_MADCTR_MODE_LANDSCAPE 0x60 /* MY = 0, MX = 1, MV = 1, ML = 0, RGB = 0 */
/* Possible values of COLMOD parameter corresponding to used pixel formats */
#define NT35510_COLMOD_RGB565 0x55
#define NT35510_COLMOD_RGB888 0x77
/**
* @brief NT35510_480X800 frequency divider
*/
#define NT35510_480X800_FREQUENCY_DIVIDER 2 /* LCD Frequency divider */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup NT35510_Exported_Macros NT35510 Exported Macros
* @{
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup NT35510_Exported_Functions
* @{
*/
void DSI_IO_WriteCmd(uint32_t NbrParams, uint8_t *pParams);
uint8_t NT35510_Init(uint32_t ColorCoding, uint32_t orientation);
uint8_t NT35510_DeInit(void);
void NT35510_IO_Delay(uint32_t Delay);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __NT35510_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/